ZHCSMZ6B December 2020 – July 2022 ADC3664
PRODUCTION DATA
The device is primarily configured and controlled using the serial programming interface (SPI) however it can operate in a default configuration without requiring the SPI interface. Furthermore the power down function as well as internal/external reference configuration is possible via pin control (PDN/SYNC and REFBUF pin).
After initial power up, the default operating configuration is shown in Table 8-10.
| FEATURE | DEFAULT |
|---|---|
| Signal Input | Differential |
| Clock Input | Differential |
| Reference | External |
| Decimation | DDC bypass |
| Interface | 2-wire |
| Output Format | 2s complement |