SBASB99 November 2025 AMC1200C
PRODUCTION DATA
- 1
- 1 Features
- 2 Applications
- 3 Description
- 4 Pin Configuration and Functions
-
5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Thermal Information?(DWV Package)
- 5.5 Thermal Information?(DUB Package)
- 5.6 Power Ratings
- 5.7 Insulation Specifications
- 5.8 Safety-Related Certifications
- 5.9 Safety Limiting Values (DWV Package)
- 5.10 Safety Limiting Values (DUB Package)
- 5.11 Electrical Characteristics
- 5.12 Switching Characteristics
- 5.13 Timing Diagram
- 5.14 Insulation Characteristics Curves
- 5.15 Typical Characteristics
- 6 Detailed Description
- 7 Application and Implementation
- 8 Device and Documentation Support
- 9 Revision History
- 10Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
7.2.2.2 Differential-to-Single-Ended Output Conversion
Many systems use ADCs with single-ended inputs that cannot connect directly to the differential output of the AMC1200C. Figure 7-3 shows a circuit for converting the differential output signal into a single-ended signal in front of the ADC. For R1 = R3 and R2 = R4, the output voltage equals (R2 / R1) × (VOUTP – VOUTN) + VREF. For C1 = C2 the bandwidth of the filter becomes 1 / (2 × π × C1 × R1). Configure the bandwidth of the filter to match the bandwidth requirement of the system. For best linearity, use capacitors with low voltage coefficients (such as NP0-type capacitors). For most applications, R1 = R2 = R3 = R4 = 3.3kΩ and C1 = C2 = 330pF yield good performance.
Figure 7-3 Connecting the AMC1200C Output to a
Single-Ended Input ADCThe following reference guides provide further information on the general procedure to design the filtering and driving stages of SAR ADCs. These reference guides are available for download at www.ti.com.