SBASB99 November 2025 AMC1200C
PRODUCTION DATA
- 1
- 1 Features
- 2 Applications
- 3 Description
- 4 Pin Configuration and Functions
-
5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Thermal Information?(DWV Package)
- 5.5 Thermal Information?(DUB Package)
- 5.6 Power Ratings
- 5.7 Insulation Specifications
- 5.8 Safety-Related Certifications
- 5.9 Safety Limiting Values (DWV Package)
- 5.10 Safety Limiting Values (DUB Package)
- 5.11 Electrical Characteristics
- 5.12 Switching Characteristics
- 5.13 Timing Diagram
- 5.14 Insulation Characteristics Curves
- 5.15 Typical Characteristics
- 6 Detailed Description
- 7 Application and Implementation
- 8 Device and Documentation Support
- 9 Revision History
- 10Mechanical, Packaging, and Orderable Information
6.3.3 Analog Output
The AMC1200C provides a differential analog output voltage on the OUTP and OUTN pins proportional to the input voltage. For input voltages in the range from VFSR, MIN to VFSR, MAX, the device has a linear response with an output voltage equal to:
At zero input, both pins output the same common-mode output voltage VCMout, as specified in the Electrical Characteristics table. For absolute input voltages greater than |VFSR | but less than |VClipping|, the differential output voltage continues to increase in magnitude, but with reduced linearity performance. The outputs saturate at a differential output voltage of VCLIPout, as shown in Figure 6-2, if the input voltage exceeds the VClipping value.
Figure 6-2 Input
to Output Transfer Curve of the AMC1200CThe AMC1200C output offers a fail-safe feature that simplifies diagnostics on a system level. Figure 6-2 shows the behavior in fail-safe mode, in which the AMC1200C outputs a negative differential output voltage that does not occur under normal operating conditions. The fail-safe output is active:
- When the high-side supply VDD1 of the AMC1200C device is missing
- When the high-side supply VDD1 falls below the undervoltage threshold VDD1UV
Use the maximum VFAILSAFE voltage specified in the Electrical Characteristics table as a reference value for fail-safe detection on a system level.