SBASB99 November 2025 AMC1200C
PRODUCTION DATA
- 1
- 1 Features
- 2 Applications
- 3 Description
- 4 Pin Configuration and Functions
-
5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Thermal Information?(DWV Package)
- 5.5 Thermal Information?(DUB Package)
- 5.6 Power Ratings
- 5.7 Insulation Specifications
- 5.8 Safety-Related Certifications
- 5.9 Safety Limiting Values (DWV Package)
- 5.10 Safety Limiting Values (DUB Package)
- 5.11 Electrical Characteristics
- 5.12 Switching Characteristics
- 5.13 Timing Diagram
- 5.14 Insulation Characteristics Curves
- 5.15 Typical Characteristics
- 6 Detailed Description
- 7 Application and Implementation
- 8 Device and Documentation Support
- 9 Revision History
- 10Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
7.2 Typical Application
The following image shows the AMC1200C in a typical application. The load current flowing through an external shunt resistor RSHUNT produces a voltage drop. The AMC1200C high-side circuitry senses the voltage drop across the shunt resistor, then digitizes and transfers data across the isolation barrier to the low side. Low-side circuitry reconstructs the digitized data into an analog signal and provides the signal as a differential voltage on the output pins.
The differential input, differential output, and high common-mode transient immunity (CMTI) of the AMC1200C provide reliable and accurate operation even in high-noise environments.
Figure 7-1 Using the AMC1200C for Current Sensing in a Typical
Application