国产精品久久久久一区二区三区共,国产成人无码精品久久久性色 ,撕开奶罩揉吮奶头A片久久小说

ZHCSND8 april 2021 LM117QML-SP

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

K|2
- MMBF001A
Y|0
NDT|3
- MMSF002
NAC|16
- MCLG025B

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

zhcsnd8_oa

7.7 Electrical Characteristics: 1.5–A I_OUT Devices (LM117K)

Over operating temperature range (T = –55°C to 125°C) unless otherwise noted.

PARAMETER		TEST CONDITIONS (1)		SUBGROUP(2)	MIN	MAX	UNIT
V_O	Output voltage	V_I = 4.25 V, I_L = –5 mA		1, 2, 3	1.2	1.3	V
		V_I = 4.25 V, I_L = –5 mA	25°C Post-radiation	1	1.2	1.35
		V_I = 4.25 V, I_L = –1.5 A		1, 2, 3	1.2	1.3
		V_I = 4.25 V, I_L = –1.5 A	25°C Post-radiation	1	1.2	1.35
		V_I = 41.25 V, I_L = –5 mA		1, 2, 3	1.2	1.3
		V_I = 41.25 V, I_L = –5 mA	25°C Post-radiation	1	1.2	1.35
		V_I = 41.25 V, I_L = –200 mA		1, 2, 3	1.2	1.3
		V_I = 41.25 V, I_L = –200 mA	25°C Post-radiation	1	1.2	1.35
		V_I = 6.25 V, I_L = –5 mA	125°C	2	1.2	1.3
V_RLine	Line regulation	4.25 V ≤ V_I ≤ 41.25 V, I_L = –5 mA	25°C	1	–9	9	mV
			125°C, –55°C	2, 3	–23	23
			25°C Post-radiation	1	–25	25
V_RLoad	Load regulation	V_I = 6.25 V, –1.5 A ≤ I_L ≤ –5 mA	25°C	1	–3.5	3.5	mV
			125°C, –55°C	2, 3	–12	12
			25°C Post-radiation	1	–7	7
		V_I = 41.25 V, –200 mA ≤ I_L ≤ –5 mA	25°C	1	–3.5	3.5
			125°C, –55°C	2, 3	–12	12
			25°C Post-radiation	1	–7	7
V_RTh	Thermal regulation	V_I = 14.6 V, I_L = –1.5 A	25°C	1	–12	12	mV
I_Adj	Adjust pin current	V_I = 4.25 V, I_L = –5 mA		1, 2, 3	–100	–15	μA
I_Adj	Adjust pin current	V_I = 41.25 V, I_L = –5 mA		1, 2, 3	–100	–15	μA
ΔI_Adj/ Line	Adjust pin current change	4.25 V ≤ V_I ≤ 41.25 V, I_L = –5 mA		1, 2, 3	–5	5	μA
ΔI_Adj / Load	Adjust pin current change	V_I = 6.25 V, –1.5 A ≤ I_L ≤ –5 mA		1, 2, 3	–5	5	μA
I_Q	Minimum load current	V_I = 4.25 V, Forced V_O = 1.4 V		1, 2, 3	–3	–0.2	mA
		V_I = 14.25 V, Forced V_O = 1.4 V		1, 2, 3	–3	–0.2
		V_I = 41.25 V, Forced V_O = 1.4 V		1, 2, 3	–5	–0.2
I_OS	Output short circuit current	V_I = 4.25 V		1, 2, 3	–3.5	–1.5	A
I_OS	Output short circuit current	V_I = 40 V		1, 2, 3	–1	–0.18	A
V_O (Recov)	Output voltage recovery	V_I = 4.25 V, R_L = 0.833 ?, C_L = 20 μF		1, 2, 3	1.2	1.3	V
		V_I = 4.25 V, R_L = 0.833 ?, C_L = 20 μF	25°C Post-radiation	1	1.2	1.35
		V_I = 40 V, R_L = 250 ?		1, 2, 3	1.2	1.3
		V_I = 40 V, R_L = 250 ?	25°C Post-radiation	1	1.2	1.35
V_Start	Voltage start-up	V_I = 4.25 V, R_L = 0.833 ?, C_L = 20 μF, I_L = –1.5 A		1, 2, 3	1.2	1.3	V
V_NO	Output noise voltage	V_I = 6.25 V, I_L = –100 mA	25°C	7		120	μV_RMS
ΔV_O / ΔV_I	Line transient response	V_I = 6.25 V, ΔV_I = 3 V, I_L = –10 mA	25°C	7		18	mV
ΔV_O / ΔI_L	Load transient response	V_I = 6.25 V, ΔI_L = –400 mA, I_L = –100 mA	25°C	7		120	mV
ΔV_I / ΔV_O	Ripple rejection	V_I = 6.25 V, I_L = –500 mA, E_I = 1 V_RMS at ? = 2400 Hz	25°C	4	65		dB
ΔV_I / ΔV_O	Ripple rejection	V_I = 6.25 V, I_L = –500 mA, E_I = 1 V_RMS at ? = 2400 Hz	25°C Post-radiation	4	60		dB

(1) Pre- and post-irradiation limits are identical for the parameters above unless specified by the test conditions.

(2) For subgroup definitions, see Quality Conformance Inspection table.

封裝選項

機械數據 (封裝 | 引腳)

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

7.7 Electrical Characteristics: 1.5–A IOUT Devices (LM117K)

7.7 Electrical Characteristics: 1.5–A I_OUT Devices (LM117K)