精品黑人一区二区三区久久,99无人区码一码二码三码,久久青草在线视频精品

ZHCSND8 april 2021 LM117QML-SP

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

K|2
- MMBF001A
Y|0
NDT|3
- MMSF002
NAC|16
- MCLG025B

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

zhcsnd8_oa

7.5 Electrical Characteristics: 0.5–A I_OUT Devices (LM117H, LM117GW)

Over operating temperature range (T = –55°C to 125°C) unless otherwise noted.

PARAMETER		TEST CONDITIONS(1)		SUBGROUP(2)	MIN	MAX	UNIT
V_O	Output voltage	V_I = 4.25 V, I_L = –5 mA		1, 2, 3	1.2	1.3	V
		V_I = 4.25 V, I_L = –5 mA	25°C Post-radiation	1	1.2	1.35
		V_I = 4.25 V, I_L = –500 mA		1, 2, 3	1.2	1.3
		V_I = 4.25 V, I_L = –500 mA	25°C Post-radiation	1	1.2	1.35
		V_I = 41.25 V, I_L = –5 mA		1, 2, 3	1.2	1.3
		V_I = 41.25 V, I_L = –5 mA	25°C Post-radiation	1	1.2	1.35
		V_I = 41.25V, I_L = –50mA		1, 2, 3	1.2	1.3
		V_I = 41.25V, I_L = –50mA	25°C Post-radiation	1	1.2	1.35
		V_I = 6.25 V, I_L = –5 mA	125°C	2	1.2	1.3
V_RLine	Line regulation	4.25 V ≤ V_I ≤ 41.25 V, I_L = –5 mA	25°C	1	–9	9	mV
			125°C, –55°C	2, 3	–23	23
			25°C Post-radiation	1	–25	25
V_RLoad	Load regulation	V_I = 6.25 V, –500 mA ≤ I_L ≤ –5 mA		1, 2, 3	–12	12	mV
V_RLoad	Load regulation	V_I = 41.25 V, –50 mA ≤ I_L ≤ –5 mA		1, 2, 3	–12	12	mV
V_RTh	Thermal regulation	V_I = 14.6 V, I_L = –500 mA	25°C	1	–12	12	mV
I_Adj	Adjust pin current	V_I = 4.25 V, I_L = –5 mA		1, 2, 3	–100	–15	μA
I_Adj	Adjust pin current	V_I = 41.25 V, I_L = –5 mA		1, 2, 3	–100	–15	μA
ΔI_Adj/ Line	Adjust pin current change	4.25 V ≤ V_I ≤ 41.25 V, I_L = –5 mA		1, 2, 3	–5	5	μA
ΔI_Adj / Load	Adjust pin current change	V_I = 6.25 V, –500 mA ≤ I_L ≤ –5 mA		1, 2, 3	–5	5	μA
I_Q	Minimum load current	V_I = 4.25 V, Forced V_O = 1.4 V		1, 2, 3	–3	–0.5	mA
		V_I = 14.25 V, Forced V_O = 1.4 V		1, 2, 3	–3	–0.5
		V_I = 41.25 V, Forced V_O = 1.4 V		1, 2, 3	–5	–1
I_OS	Output short circuit current	V_I = 4.25 V		1, 2, 3	–1.8	–0.5	A
I_OS	Output short circuit current	V_I = 40 V		1, 2, 3	–0.5	–0.05	A
V_O (Recov)	Output voltage recovery	V_I = 4.25 V, R_L = 2.5 ?, C_L = 20 μF		1, 2, 3	1.2	1.3	V
		V_I = 4.25 V, R_L = 2.5 ?, C_L = 20 μF	25°C Post-radiation	1	1.2	1.35
		V_I = 40 V, R_L = 250 ?		1, 2, 3	1.2	1.3
		V_I = 40 V, R_L = 250 ?	25°C Post-radiation	1	1.2	1.35
V_Start	Voltage start-up	V_I = 4.25 V, R_L = 2.5 ?, C_L = 20 μF, I_L = –500 mA		1, 2, 3	1.2	1.3	V
V_NO	Output noise voltage	V_I = 6.25 V, I_L = –50 mA	25°C	7		120	μV_RMS
ΔV_O / ΔV_I	Line transient response	V_I = 6.25 V, ΔV_I = 3 V, I_L = –10 mA	25°C	7		6	mV/V
ΔV_O / ΔI_L	Load transient response	V_I = 6.25V, ΔI_L = –200 mA, I_L = –50 mA	25°C	7		0.6	mV/mA
ΔV_I / ΔV_O	Ripple rejection	V_I = 6.25 V, I_L = –125 mA, E_I = 1 V_RMS at ? = 2400 Hz	25°C	4	65		dB
ΔV_I / ΔV_O	Ripple rejection	V_I = 6.25 V, I_L = –125 mA, E_I = 1 V_RMS at ? = 2400 Hz	25°C Post-radiation	4	60		dB

(1) Pre- and post-irradiation limits are identical for the parameters above unless specified by the test conditions.

(2) For subgroup definitions, see Quality Conformance Inspection table.

封裝選項

機械數據 (封裝 | 引腳)

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

7.5 Electrical Characteristics: 0.5–A IOUT Devices (LM117H, LM117GW)

7.5 Electrical Characteristics: 0.5–A I_OUT Devices (LM117H, LM117GW)