SLUSFR7 August 2025 BQ24810
PRODUCTION DATA
請(qǐng)參考 PDF 數(shù)據(jù)表獲取器件具體的封裝圖。
If no battery is present, hybrid boost mode has been disabled, or if the hybrid boost discharge current limit (IDCHG) is regulated then the BQ24810 device cannot maintain the input current level once the charge current has been reduced to 0. When the input current exceeds 1.25x or 2x of ILIM2 set point for the 6-ms deglitch time, ACFET/RBFET is latched off and an adapter removal is required to force ACDET < 0.6 V to remove the latch. After the latch is removed, ACFET/RBFET can be turned on again.
The ACOC function threshold can be set to 1.25x or 2x of ILIM2 current with ACOC_VTH (REG0x37[9]) or disabled through SMBus command EN_ACOC (REG0x37[10]). There is boundary clamp VACOC_CLAMP for ACOC thresholds, the upper clamp is 190mV and lower clamp is 50mV across ACP and ACN pin voltage.