| PIN NAME | TEST CONDITIONS | TYP | UNIT |
|---|
| RIN1,
RIN2(2) | HBM | ±15 | kV |
| IEC 61000-4-2 Air-Gap Discharge (1) | ±15 |
| IEC 61000-4-2 Contact Discharge (1) | ±8 |
(1) For RGT, D and PW packages only:A minimum of 1-μF capacitor is needed between VCC and GND to meet the specified IEC ESD level.
(2) For optimized IEC ESD performance for DYY
package, the recommendation is to have series
resistor (≥ 50?), on all logic inputs directly
connected to power or ground, to minimize the
transient currents going into or out of the logic
pins.