| PIN
NAME |
TEST CONDITIONS |
TYP |
UNIT |
| DOUT1, DOUT2(2) |
Human-body
model (HBM) |
±15 |
kV |
| IEC 61000-4-2
Air-Gap Discharge(1) |
±15 |
| IEC 61000-4-2
Contact Discharge(1) |
±8 |
(1) For RGT, D and PW packages only: A minimum of
1-μF capacitor is needed between VCC and GND to meet the specified IEC ESD
level .
(2) For optimized IEC ESD performance for DYY
package, the recommendation is to have series resistor (≥ 50?), on all logic inputs
directly connected to power or ground, to minimize the transient currents going into or
out of the logic pins.