ZHCSP64 January 2024 TMUX7208M
PRODUCTION DATA
| 參數 | 測試條件 | TA | 最小值 | 典型值 | 最大值 | 單位 | |
|---|---|---|---|---|---|---|---|
| 模擬開關 | |||||||
| RON | 導通電阻 | VS = 0V 至 40V ID = –10mA 請參閱導通電阻 |
25°C | 3.5 | 5.5 | Ω | |
| –40°C 至 +85°C | 7 | Ω | |||||
| –55°C 至 +125°C | 8.4 | Ω | |||||
| ΔRON | 通道間的導通電阻不匹配 | VS = 0V 至 40V ID = –10mA 請參閱導通電阻 |
25°C | 0.2 | 0.7 | Ω | |
| –40°C 至 +85°C | 0.8 | Ω | |||||
| –55°C 至 +125°C | 0.9 | Ω | |||||
| RON FLAT | 導通電阻平坦度 | VS = 0V 至 40V ID = –10mA 請參閱導通電阻 |
25°C | 0.4 | 1.85 | Ω | |
| –40°C 至 +85°C | 2.3 | Ω | |||||
| –55°C 至 +125°C | 2.8 | Ω | |||||
| RON DRIFT | 導通電阻漂移 | VS = 22V，IS = –10mA 請參閱導通電阻 |
–55°C 至 +125°C | 0.015 | ?/°C | ||
| IS(OFF) | 源極關斷漏電流(1) | VDD = 44V，VSS = 0V 開關狀態為關斷 VS = 40V/1V VD = 1V/40V 請參閱關斷漏電流 |
25°C | -1 | 0.04 | 1 | nA |
| –40°C 至 +85°C | -2.5 | 2.5 | nA | ||||
| –55°C 至 +125°C | -14 | 14 | nA | ||||
| ID(OFF) | 漏極關斷漏電流(1) | VDD = 44V，VSS = 0V 開關狀態為關斷 VS = 40V/1V VD = 1V/40V 請參閱關斷漏電流 |
25°C | –1 | 0.05 | 1 | nA |
| –40°C 至 +85°C | –16 | 16 | nA | ||||
| –55°C 至 +125°C | –110 | 110 | nA | ||||
| IS(ON) ID(ON) |
通道導通漏電流(2) | VDD = 44V，VSS = 0V 開關狀態為導通 VS = VD = 40V 或 1V 請參閱導通漏電流 |
25°C | –1 | 0.05 | 1 | nA |
| –40°C 至 +85°C | -15 | 15 | nA | ||||
| –55°C 至 +125°C | –98 | 98 | nA | ||||
| 邏輯輸入（EN、A0、A1、A2） | |||||||
| VIH | 邏輯電壓高位 | –55°C 至 +125°C | 1.3 | 44 | V | ||
| VIL | 邏輯電壓低位 | –55°C 至 +125°C | 0 | 0.8 | V | ||
| IIH | 輸入漏電流 | –55°C 至 +125°C | 0.4 | 1.2 | μA | ||
| IIL | 輸入漏電流 | –55°C 至 +125°C | -0.1 | –0.005 | μA | ||
| CIN | 邏輯輸入電容 | –55°C 至 +125°C | 3.5 | pF | |||
| 電源 | |||||||
| IDD | VDD 電源電流 | VDD = 44V，VSS = 0V 邏輯輸入 = 0V、5V 或 VDD |
25°C | 55 | 85 | μA | |
| –40°C 至 +85°C | 95 | μA | |||||
| –55°C 至 +125°C | 110 | μA | |||||