ZHCSNJ0G September 2006 – March 2021 PCA9538
PRODUCTION DATA
- 1 特性
- 2 說明
- 3 Revision History
- 4 Pin Configuration and Functions
- 5 Specifications
- 6 Parameter Measurement Information
- 7 Detailed Description
- 8 Application Information Disclaimer
- 9 Power Supply Recommendations
- 10Device and Documentation Support
- 11Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
散熱焊盤機械數據 (封裝 | 引腳)
- DW|16
訂購信息
8.2.1.1 Minimizing ICC When I/Os Control Leds
When the I/Os are used to control LEDs, normally they are connected to VCC through a resistor as shown in Figure 8-1. The LED acts as a diode, so when the LED is off, the I/O VIN is about 1.2 V less than VCC. ICC in Electrical Characteristics shows how ICC increases as VIN becomes lower than VCC.
For battery-powered applications, it is essential that the voltage of I/O pins is greater than or equal to VCC when the LED is off to minimize current consumption. Figure 8-2 shows a high-value resistor in parallel with the LED. Figure 8-3 shows VCC less than the LED supply voltage by at least 1.2 V. Both of these methods maintain the I/O VIN at or above VCC and prevents additional supply current consumption when the LED is off.
Figure 8-2 High-Value Resistor in Parallel with Led
Figure 8-3 Device Supplied by a Lower Voltage