SBASAR8 November 2025 AMC0300D-Q1
PRODMIX
- 1
- 1 Features
- 2 Applications
- 3 Description
- 4 Device Comparison Table
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information?(D Package)
- 6.5 Thermal Information?(DWV Package)
- 6.6 Power Ratings?
- 6.7 Insulation Specifications (Basic Isolation)
- 6.8 Insulation Specifications (Reinforced Isolation)
- 6.9 Safety-Related Certifications (Basic Isolation)
- 6.10 Safety-Related Certifications (Reinforced Isolation)
- 6.11 Safety Limiting Values (D Package)
- 6.12 Safety Limiting Values (DWV Package)
- 6.13 Electrical Characteristics
- 6.14 Switching Characteristics
- 6.15 Timing Diagram
- 6.16 Insulation Characteristics Curves
- 6.17 Typical Characteristics
- 7 Detailed Description
- 8 Application and Implementation
- 9 Device and Documentation Support
- 10Revision History
- 11Mechanical, Packaging, and Orderable Information
8.2 Typical Application
The following image shows the AMC0x00D-Q1 in a typical application. The load current flowing through an external shunt resistor RSHUNT produces a voltage drop. The AMC0x00D-Q1 high-side circuitry senses the voltage drop across the shunt resistor, then digitizes and transfers data across the isolation barrier to the low side. Low-side circuitry reconstructs the digitized data into an analog signal and provides the signal as a differential voltage on the output pins.
The differential input, differential output, and high common-mode transient immunity (CMTI) of the AMC0x00D-Q1 provide reliable and accurate operation even in high-noise environments.
Figure 8-1 Using the AMC0x00D-Q1 for Current Sensing in a Typical
Application