ZHCSHX9L November 2008 – February 2019 ADC14155QML-SP
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 ADC14155 Converter Electrical Characteristics DC Parameters
- 6.6 ADC14155 Converter Electrical Characteristics (Continued) DYNAMIC Parameters
- 6.7 ADC14155 Converter Electrical Characteristics (Continued) Logic and Power Supply Electrical Characteristics
- 6.8 ADC14155 Converter Electrical Characteristics (Continued) Timing and AC Characteristics
- 6.9 Timing Diagram
- 6.10 Transfer Characteristic
- 6.11 Typical Performance Characteristics, DNL, INL
- 6.12 Typical Performance Characteristics, Dynamic Performance
- 7 Detailed Description
- 8 Application and Implementation
- 9 Power Supply Recommendations
- 10Layout
- 11器件和文檔支持
- 12機械、封裝和可訂購信息
封裝選項
請參考 PDF 數據表獲取器件具體的封裝圖。
機械數據 (封裝 | 引腳)
- NBA|48
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
6.5 ADC14155 Converter Electrical Characteristics DC Parameters(11)
Unless otherwise specified, the following specifications apply: AGND = DGND = DRGND = 0 V, VA = VD = 3.3 V, VDR = 1.8 V, Internal VREF = 1 V, fCLK = 155 MHz, VCM = VRM, CL = 5 pF/pin, Differential Analog Input, Single-Ended Clock Mode, Offset Binary Format. Typical values are for TA = 25°C. (1)(4)(5)(2)| PARAMETER | TEST CONDITIONS | NOTES | TYP(6) | MIN | MAX | UNITS | SUB-GROUPS | |
|---|---|---|---|---|---|---|---|---|
| STATIC CONVERTER CHARACTERISTICS | ||||||||
| Resolution with no missing codes | 14 | Bits | ||||||
| INL | Integral non linearity | See(7) | 2.3 | –5.0 | 5.0 | LSB | ||
| DNL | Differential non linearity | ±0.5 | –0.9 | 1.1 | LSB | |||
| PGE | Maximum positive gain error | 0.1 | –3.3 | 3.5 | %FS | |||
| NGE | Maximum negative gain error | 0.3 | –3.3 | 3.9 | %FS | |||
| TC GE | Gain error tempco | –55°C ≤ TA ≤ +125°C | 0.007 | Δ%FS/°C | ||||
| VOFF | Offset error (VIN+ = VIN–) | –0.1 | 0.7 | –0.9 | %FS | |||
| TC VOFF | Offset error tempco | –55°C ≤ TA ≤ +125°C | 0.0001 | Δ%FS/°C | ||||
| Under range output code | 0 | 0 | 0 | |||||
| Over range output code | 16383 | 16383 | 16383 | |||||
| REFERENCE AND ANALOG INPUT CHARACTERISTICS | ||||||||
| VCM | Common mode input voltage | 1.5 | V | |||||
| VRM | Reference ladder midpoint output voltage | Output load = 1 mA | 1.5 | V | ||||
| CIN | VIN input capacitance
(each pin to GND) |
VIN = 1.5 Vdc ± 0.5 V(CLK LOW) | See(8) | 9 | pF | |||
| VIN = 1.5 Vdc ± 0.5 V(CLK HIGH) | See(8) | 6 | pF | |||||
| VREF | Reference voltage | See(9) | 1.00 | V | ||||
| Reference input resistance | 9 | kΩ | ||||||
(1) The inputs are protected as shown below. Input voltage magnitudes above VA or below GND will not damage this device, provided current is limited per Note 5. However, errors in the A/D conversion can occur if the input goes above 2.6 V or below GND as described in the Recommended Operating Conditions section.
(2) When the input voltage at any pin exceeds the power supplies (that is, VIN < AGND, or VIN > VA), the current at that pin should be limited to ±5 mA. The ±50-mA maximum package input current rating limits the number of pins that can safely exceed the power supplies with an input current of ±5 mA to 10.