產品詳情

Rating Catalog Number of series cells 1, 2, 3 Cell chemistry Li-Ion/Li-Polymer Charge current (max) (A) 4 Features BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, Input OVP, Power Path Vin (min) (V) 4.5 Vin (max) (V) 17 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 4.2 Battery charge voltage (max) (V) 13.5 Control interface Standalone (RC-Settable) Operating temperature range (°C) -40 to 85
Rating Catalog Number of series cells 1, 2, 3 Cell chemistry Li-Ion/Li-Polymer Charge current (max) (A) 4 Features BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, Input OVP, Power Path Vin (min) (V) 4.5 Vin (max) (V) 17 Absolute max Vin (max) (V) 20 Control topology Switch-Mode Buck Battery charge voltage (min) (V) 4.2 Battery charge voltage (max) (V) 13.5 Control interface Standalone (RC-Settable) Operating temperature range (°C) -40 to 85
VQFN (RGY) 24 19.25 mm2 5.5 x 3.5
  • 1.6-MHz Synchronous Switched-Mode Charger
    with 4-A Integrated N-MOSFETs
  • Up to 94% Efficiency
  • 30-V Input Rating with Adjustable Overvoltage
    Protection
    • 4.5-V to 17-V Input Operating Voltage Range
  • Battery Charge Voltage
    • bq24170: 1-, 2-, or 3-Cell with 4.2 V/Cell
    • bq24172: Adjustable Charge Voltage
  • High Integration
    • Automatic Power Path Selector Between
      Adapter and Battery
    • Dynamic Power Management
    • Integrated 20-V Switching MOSFETs
    • Integrated Bootstrap Diode
    • Internal Digital Soft Start
  • Safety
    • Thermal Regulation Loop Throttles Back
      Current to Limit TJ = 120°C
    • Thermal Shutdown
    • Battery Thermistor Sense Hot/Cold Charge
      Suspend and Battery Detect
    • Adjustable Input Overvoltage Protection
    • Cycle-by-Cycle Current Limit
  • Accuracy
    • ±0.5% Charge Voltage Regulation
    • ±4% Charge Current Regulation
    • ±4% Input Current Regulation
  • <15-μA Battery Current With Adapter Removed
  • <1.5-mA Input Current With Adapter Present and
    Charge Disabled
  • 1.6-MHz Synchronous Switched-Mode Charger
    with 4-A Integrated N-MOSFETs
  • Up to 94% Efficiency
  • 30-V Input Rating with Adjustable Overvoltage
    Protection
    • 4.5-V to 17-V Input Operating Voltage Range
  • Battery Charge Voltage
    • bq24170: 1-, 2-, or 3-Cell with 4.2 V/Cell
    • bq24172: Adjustable Charge Voltage
  • High Integration
    • Automatic Power Path Selector Between
      Adapter and Battery
    • Dynamic Power Management
    • Integrated 20-V Switching MOSFETs
    • Integrated Bootstrap Diode
    • Internal Digital Soft Start
  • Safety
    • Thermal Regulation Loop Throttles Back
      Current to Limit TJ = 120°C
    • Thermal Shutdown
    • Battery Thermistor Sense Hot/Cold Charge
      Suspend and Battery Detect
    • Adjustable Input Overvoltage Protection
    • Cycle-by-Cycle Current Limit
  • Accuracy
    • ±0.5% Charge Voltage Regulation
    • ±4% Charge Current Regulation
    • ±4% Input Current Regulation
  • <15-μA Battery Current With Adapter Removed
  • <1.5-mA Input Current With Adapter Present and
    Charge Disabled

The bq2417x device is a highly integrated stand-alone Li-Ion and Li-Polymer switched-mode battery charger with two integrated N-channel power MOSFETs. The device offers a constant-frequency synchronous PWM controller with high-accuracy regulation of input current, charge current, and voltage. The bq2417x closely monitors the battery pack temperature to allow charge only in a preset temperature window. The bq24170 charges one, two, or three cells (selected by CELL pin), and the bq24172 is adjustable for up to three series Li+ cells.

The device charges the battery in three phases: precondictioning, constant current, and constant voltage.

Charge is terminated when the current reaches 10% of the fast charge rate. A programmable charge timer offers a safety backup. The bq2417x automatically restarts the charge cycle if the battery voltage falls below an internal threshold, and enters a low-quiescent current sleep mode when the input voltage falls below the battery voltage.

The bq2417x features Dynamic Power Management (DPM) to reduce the charge current when the input power limit is reached to avoid overloading the adapter. A highly accurate current-sense amplifier enables precise measurement of input current from adapter to monitor overall system power.

The bq2417x provides power path selector gate driver ACDRV/CMSRC on input NMOS pair ACFET (Q1) and RBFET (Q2), and BATDRV on a battery PMOS device (Q3). When the qualified adapter is present, the system is directly connected to the adapter. Otherwise, the system is connected to the battery. In addition, the power path prevents battery from boosting back to the input.

The bq2417x charges a battery from a DC source as high as 17 V, including a car battery. The input overvoltage limit is adjustable through the OVPSET pin. The AVCC, ACP, and ACN pins have a 30-V rating. When a high-voltage DC source is inserted, Q1 and Q2 remain off to avoid high voltage damage to the system.

For 1-cell applications, if the battery is not removable, the system can be directly connected to the battery to simplify the power path design and reduce the cost. With this configuration, the battery can automatically supplement the system load if the adapter is overloaded.

The bq2417x is available in a 24-pin, 5.5-mm × 3.5-mm thin VQFN package.

The bq2417x device is a highly integrated stand-alone Li-Ion and Li-Polymer switched-mode battery charger with two integrated N-channel power MOSFETs. The device offers a constant-frequency synchronous PWM controller with high-accuracy regulation of input current, charge current, and voltage. The bq2417x closely monitors the battery pack temperature to allow charge only in a preset temperature window. The bq24170 charges one, two, or three cells (selected by CELL pin), and the bq24172 is adjustable for up to three series Li+ cells.

The device charges the battery in three phases: precondictioning, constant current, and constant voltage.

Charge is terminated when the current reaches 10% of the fast charge rate. A programmable charge timer offers a safety backup. The bq2417x automatically restarts the charge cycle if the battery voltage falls below an internal threshold, and enters a low-quiescent current sleep mode when the input voltage falls below the battery voltage.

The bq2417x features Dynamic Power Management (DPM) to reduce the charge current when the input power limit is reached to avoid overloading the adapter. A highly accurate current-sense amplifier enables precise measurement of input current from adapter to monitor overall system power.

The bq2417x provides power path selector gate driver ACDRV/CMSRC on input NMOS pair ACFET (Q1) and RBFET (Q2), and BATDRV on a battery PMOS device (Q3). When the qualified adapter is present, the system is directly connected to the adapter. Otherwise, the system is connected to the battery. In addition, the power path prevents battery from boosting back to the input.

The bq2417x charges a battery from a DC source as high as 17 V, including a car battery. The input overvoltage limit is adjustable through the OVPSET pin. The AVCC, ACP, and ACN pins have a 30-V rating. When a high-voltage DC source is inserted, Q1 and Q2 remain off to avoid high voltage damage to the system.

For 1-cell applications, if the battery is not removable, the system can be directly connected to the battery to simplify the power path design and reduce the cost. With this configuration, the battery can automatically supplement the system load if the adapter is overloaded.

The bq2417x is available in a 24-pin, 5.5-mm × 3.5-mm thin VQFN package.
下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

功能與比較器件相同，但引腳排列有所不同
BQ24171 正在供貨 符合 JEITA 標準且具有電源路徑的獨立 1 至 3 節 4A 同步降壓電池充電器 This product supports adjustable cell voltage and JEITA temperature profile

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 4
類型 標題 下載最新的英語版本 日期
* 數據表 bq2417x 1.6-MHz Synchronous Switched-Mode Li-Ion and Li-Polymer Stand-Alone Battery Charger With Integrated MOSFETs and Power Path Selector 數據表 (Rev. C) PDF | HTML 2015年 4月 30日
應用手冊 BQ241xx/BQ246xx Selection of Multi-Cell Standalone Switching Battery Chargers 2019年 12月 31日
選擇指南 電源管理指南 2018 (Rev. K) 2018年 7月 31日
用戶指南 bq24170EVM Evaluation Module 2010年 11月 12日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

評估板

BQ24170EVM-610-15V — 用于 BQ24170 1.6MHz 同步開關模式鋰離子和鋰聚合物電池充電器的評估模塊

德州儀器 (TI) BQ24170EVM-610-15V (-002) 評估模塊能幫助設計人員評估 bq24170 同步電池充電器的操作和性能。該 EVM 也稱為 HPA610 (-002)。該 EVM 針對 12V 或 15V 輸入電壓進行了優化，可為 1 至 3 節鋰離子電池充電。bq24170 是高度集成的獨立鋰離子和鋰聚合物開關模式電池充電控制器，具有兩個集成式 N 通道功率 MOSFET 和功率路徑選擇器閘極驅動器。它可以為恒頻同步 PWM 控制器提供高準確度輸入電流、充電電流和電壓調節。它還提供電池檢測、預處理、充電終止和充電狀態監控。本用戶指南包含該 EVM (...)

用戶指南: PDF
TI.com 上無現貨
評估板

BQ24170EVM-610-5V — 用于 BQ24170 1.6MHz 同步開關模式鋰離子和鋰聚合物電池充電器的評估模塊

德州儀器 (TI) BQ24170EVM-610-5V (-001) 評估模塊能幫助設計人員評估 bq24170 同步電池充電器的操作和性能。該 EVM 也稱為 HPA610 (-001)。該 EVM 針對 5V 輸入電壓進行了優化，可為單節 4.2V 鋰離子電池充電。bq24170 是高度集成的獨立鋰離子和鋰聚合物開關模式電池充電控制器，具有兩個集成式 N 通道功率 MOSFET 和功率路徑選擇器閘極驅動器。它可以為恒頻同步 PWM 控制器提供高準確度輸入電流、充電電流和電壓調節。它還提供電池檢測、預處理、充電終止和充電狀態監控。本用戶指南包含該 EVM 物料清單、板面布局和原理圖。

用戶指南: PDF
TI.com 上無現貨
計算工具

SLUC231 — bq2417x Calculation Tool V1.0

支持的產品和硬件

支持的產品和硬件

產品
電池充電器 IC
BQ24170 — 具有電源路徑選擇器的獨立 1 至 3 節 4A 同步降壓電池充電器 BQ24172 — 獨立 1 至 3 節 4A 同步降壓電池充電器
計算工具

SLUC244 — bqswitcherII calculation tools V1.2

支持的產品和硬件

支持的產品和硬件

產品
電池充電器 IC
BQ24130 — 適用于鋰離子電池和超級電容器的獨立 1 至 3 節降壓電池充電器 BQ24133 — 具有外部電源路徑的獨立 1 至 3 節 2.5A 同步降壓電池充電器 BQ24170 — 具有電源路徑選擇器的獨立 1 至 3 節 4A 同步降壓電池充電器 BQ24171 — 符合 JEITA 標準且具有電源路徑的獨立 1 至 3 節 4A 同步降壓電池充電器 BQ24172 — 獨立 1 至 3 節 4A 同步降壓電池充電器
光繪文件

HPA610 Gerber Files

SLUC236.ZIP (289 KB)
下載
參考設計

TIDA-00027 — 1.6MHz 同步開關模式鋰離子/鋰聚合物獨立電池充電器參考設計

此參考設計將獨立的鋰離子和鋰聚合物開關模式蓄電池充電解決方案與兩個集成 N 通道功率 MOSFET 和一個電源路徑選擇器閘極驅動器進行高度集成。它可以為恒頻同步 PWM 控制器提供高準確度輸入電流、充電電流和電壓調節。它還提供電池檢測、預處理、充電終止和充電狀態監控。此參考設計又稱為 HPA715 (-001)。該解決方案針對 5 V 輸入電壓進行了優化，并可給 4.2 V 的單節鋰離子蓄電池充電。
測試報告: PDF
參考設計

TIDA-00028 — 1.6MHz 同步開關模式鋰離子和鋰聚合物獨立電池充電器 (4A) 參考設計

此參考設計將獨立的鋰離子和鋰聚合物開關模式蓄電池充電解決方案與兩個集成 N 通道功率 MOSFET 和一個電源路徑選擇器閘極驅動器進行高度集成。它可以為恒頻同步 PWM 控制器提供高準確度輸入電流、充電電流和電壓調節。它還提供電池檢測、預處理、充電終止和充電狀態監控。此參考設計又稱為 HPA715 (-001)。該解決方案針對 5 V 輸入電壓進行了優化，并可給 4.2 V 的單節鋰離子蓄電池充電。
測試報告: PDF
原理圖: PDF
參考設計

TIDA-00026 — 可編程多化合物快速充電管理參考設計

該參考設計是可編程的單片 IC 解決方案，適用于單化學物或多化學物應用中對鎳鎘 (NiCd)、鎳氫 (NiMH) 或鋰離子 (Li-Ion) 電池的快速充電管理。其會選用合適的電池化學物（鎳或鋰），并使用最佳的充電和終止算法執行操作。該過程消除了不良充電、充電不足或過度充電的情況，并確?？焖俪潆姷木_度和安全終止。
測試報告: PDF
原理圖: PDF
封裝 引腳 CAD 符號、封裝和 3D 模型
VQFN (RGY) 24 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻