評估模塊 (EVM) 用 GUI
數據表
AFE5808A
- 8-Channel Complete Analog Front-End
- LNA, VCAT, PGA, LPF, ADC, and CW Mixer
- Programmable Gain Low-Noise Amplifier (LNA)
- 24-, 18-, or 12-dB Gain
- 0.25-, 0.5-, or 1-VPP Linear Input Range
- 0.63-, 0.7-, or 0.9-nV/√Hz Input-Referred Noise
- Programmable Active Termination
- 40-dB, Low-Noise Voltage-Controlled Attenuator
(VCAT) - 24-, or 30-dB Programmable Gain Amplifier (PGA)
- 3rd-Order, Linear-Phase, Low-Pass Filter (LPF)
- 10 MHz, 15 MHz, 20 MHz, or 30 MHz
- 14-bit Analog-to-Digital Converter (ADC)
- 77-dBFS SNR at 65 MSPS
- LVDS Outputs
- Noise and Power Optimizations (Full Chain)
- 158 mW/CH at 0.75 nV/√Hz, 65 MSPS
- 101 mW/CH at 1.1 nV/√Hz, 40 MSPS
- 80 mW/CH in CW Mode
- Excellent Device-to-Device Gain Matching
- ±0.5 dB (Typical) and ±0.9 dB (Maximum)
- Low Harmonic Distortion
- Fast and Consistent Overload Recovery
- Passive Mixer for Continuous Wave Doppler
(CWD)- Low Close-in Phase Noise: –156 dBc/Hz at 1
KHz Off 2.5-MHz Carrier - Phase Resolution of 1/16λ
- Support 16X, 8X, 4X and 1X CW Clocks
- 12-dB Suppression on 3rd and 5th Harmonics
- Flexible Input Clocks
- Low Close-in Phase Noise: –156 dBc/Hz at 1
- Small Package: 15-mm × 9-mm, 135-Pin NFBGA
The AFE5808A is a highly-integrated, analog front-end (AFE) solution specifically designed for ultrasound systems in which high performance and small size are required. The AFE5808A integrates a complete time-gain-control (TGC) imaging path and a continuous wave Doppler (CWD) path. This device also enables users to select one of various power and noise combinations to optimize system performance. Therefore, the AFE5808A is an outstanding ultrasound analog front-end solution not only for high-end systems, but also for portable ones.
The AFE5808A device contains eight voltage controlled amplifiers (VCA), 14- and 12-bit analog-to-digital converters (ADC), and CW mixers. The VCA includes a low-noise amplifier (LNA), voltage-controlled attenuator (VCAT), programmable gain amplifier (PGA), and low-pass filter (LPF). The LNA gain is programmable to support 250 mVPP to 1 VPP input signals. Programmable active termination is also supported by the LNA. The ultralow noise VCAT provides an attenuation control range of 40 dB, and improves overall low gain SNR that benefits harmonic imaging and near field imaging. The PGA provides gain options of 24 dB and 30 dB. In front of the ADC, a LPF can be configured as 10 MHz, 15 MHz, 20 MHz, or 30 MHz to support ultrasound applications with different frequencies. The high-performance 14-bit, 65-MSPS ADC in the AFE5808A device achieves 77-dBFS SNR, and ensures excellent SNR at low-chain gain. The ADC LVDS outputs enable flexible system integration desired for miniaturized systems.
The AFE5808A device also incorporates a low-power passive mixer and a low-noise summing amplifier to accomplish on-chip CWD beamforming. Sixteen selectable phase-delays can be applied to each analog input signal. A unique 3rd- and 5th-order harmonic-suppression filter is implemented to enhance CW sensitivity.
The AFE5808A is available in a 15-mm × 9-mm, 135-pin BGA package and it is specified for operation from 0°C to 85°C. This device is also pin-to-pin compatible with the AFE5803, AFE5807, and AFE5808.
NOTE: The AFE5808A is an enhanced version of AFE5808 and is recommended for new designs. Compared to the AFE5808, the AFE5808A expands the cutoff frequency range of the digital high-pass filter; increases the handling capability of extreme overload signals; and lowers the correlated noise significantly when high-impedance source appears.
技術文檔
未找到結果。請清除搜索并重試。
查看全部 3 | 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 數據表 | AFE5808A 0.75 nV/√Hz, 65-MSPS, 158 mW/Channel, Fully-Integrated, 8-Channel, 14- and 12-Bit, Ultrasound Analog Front-End With Passive CW Mixer 數據表 (Rev. D) | PDF | HTML | 2015年 7月 6日 | ||
| EVM 用戶指南 | AFE5808/08A (Rev E) Evaluation Module.. (Rev. B) | 2015年 3月 5日 | ||||
| 應用手冊 | Understanding Serial LVDS Capture in High-Speed ADCs | 2013年 7月 10日 |
設計和開發
如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。
評估板
AFE5808AEVM — AFE5808A 評估模塊
AFE5808AEVM 提供了便捷的平臺來評估 AFE5808A。AFE5808A 是 AFE5808 的增強版本，推薦用于新設計。與 AFE5808 相比，AFE5808A 擴大了數字高通濾波器的截止頻率范圍；降低了出現高阻抗源時的相關噪聲；提高了極端過載信號的處理能力。
AFE5808A 是一款 8 通道完全集成的模擬前端 (AFE)，具有連續波 (CW) 多普勒混頻器，適用于頻譜多普勒超聲波設備。EVM 套件中包含用戶指南、軟件、USB 電纜和經過完整組裝的電路板。用戶需要提供輸入信號以進行信號發生器測量。用戶需要獲得一種方法，用于添加和分析來自 AFE5808 LVDS (...)
用戶指南: PDF
模擬工具
PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具
PSpice? for TI 可提供幫助評估模擬電路功能的設計和仿真環境。此功能齊全的設計和仿真套件使用 Cadence? 的模擬分析引擎。PSpice for TI 可免費使用，包括業內超大的模型庫之一，涵蓋我們的模擬和電源產品系列以及精選的模擬行為模型。
借助?PSpice for TI 的設計和仿真環境及其內置的模型庫，您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案，然后再進行布局和制造，可縮短產品上市時間并降低開發成本。?
在?PSpice for TI 設計和仿真工具中，您可以搜索 TI (...)
借助?PSpice for TI 的設計和仿真環境及其內置的模型庫，您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案，然后再進行布局和制造，可縮短產品上市時間并降低開發成本。?
在?PSpice for TI 設計和仿真工具中，您可以搜索 TI (...)
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| NFBGA (ZCF) | 135 | Ultra Librarian |
訂購和質量
包含信息：
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
包含信息：
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。