AFE5801
- Eight Variable-Gain Amplifiers (VGA)
- Eight Differential Buffered Inputs With 2Vpp Maximum Swing
- 5.5nV/√Hz VCA Input Noise (31dB Gain)
- Variable Gain, –5dB to 31dB With 0.125dB or 1dB Steps
- Digital Gain Control
- Third-Order Antialiasing Filter With Programmable Cutoff Frequency (7.5, 10, or 14MHz)
- Clamping
- Analog-to-Digital Converter (ADC)
- Octal Channel, 12Bit, 65MSPS
- Internal and External Reference Support
- No External Decoupling Required for References
- Serial LVDS Outputs
- 1.8V and 3.3V Supplies
- 50mW Total Power per Channel at 30MSPS
- 58mW Total Power per Channel at 50MSPS
- 64QFN Package (9mm × 9mm)
- APPLICATIONS
- Imaging: Ultrasound, PET
- APPLICATIONS
- AFE5851: 16-Channel VGA + ADC, 32.5MSPS/Channel
The AFE5801 is an analog front end, targeting applications where the power and level of integration are critical. The device contains eight variable-gain amplifiers (VGA), each followed by a high-speed (up to 65MSPS) ADC, for a total of eight ADCs per device.
Each of the eight differential inputs is buffered, accepts up to 2Vpp maximum input swing, and is followed by a VGA with a gain range from –5dB to 31dB. The VGA gain is digitally controlled, and the gain curves versus time can be stored in memory integrated within the device using the serial interface.
A selectable clamping and antialias low-pass filter (with 3dB attenuation at 7.5, 10, or 14MHz) is also integrated between VGA and ADC, for every channel.
The VGA/antialias filter outputs are differential (limited to 2Vpp) and drive the onboard 12bit, 65MSPS ADC. The ADC also scales down its power consumption should a lower sampling rate be selected. The ADC outputs are serialized in LVDS streams, which further minimizes power and board area.
The AFE5801 is available in a 64-pin QFN package (9mm × 9mm) and is specified over the full industrial temperature range (–40°C to 85°C).
技術文檔
| 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 數據表 | 8-Channel Variable-Gain Amplifier (VGA) With Octal High-Speed ADC 數據表 (Rev. D) | 2010年 5月 24日 | |||
| 用戶指南 | AFE5801 8-Channel Varable Gain Ampl w/Octal High-Speed ADC (Rev. B) | 2015年 3月 5日 | ||||
| 用戶指南 | TSW1250EVM: High-Speed LVDS Deserializer and Analysis System (Rev. F) | 2012年 1月 20日 | ||||
| 更多文獻資料 | Ultrasound flyer (Rev. A) | 2011年 9月 22日 |
設計和開發
如需其他信息或資源,請點擊以下任一標題進入詳情頁面查看(如有)。
AFE5801EVM — AFE5801 評估模塊
AFE5801 評估模塊 (EVM) 是一款用于開發 AFE5801 器件的平臺。AFE5801 包含一個帶數字控制功能的 8 通道壓控放大器 (VCA) 和一個 8 通道 65MSPS 模數轉換器 (ADC)。AFE5801 的模擬前端 (AFE) 電路將處理 8 個模擬輸入信號;然后該器件中的 ADC 會將 AFE 的輸出進行數字化處理。
請注意,評估 AFE5801EVM 時需要使用 TSW1400EVM(已停產)。我們建議您在獲取 TSW1400EVM 后再購買 AFE5801EVM。
SLOC231 — TSW1250EVM Software
支持的產品和硬件
產品
超聲波 AFE
硬件開發
評估板
PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具
借助?PSpice for TI 的設計和仿真環境及其內置的模型庫,您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案,然后再進行布局和制造,可縮短產品上市時間并降低開發成本。?
在?PSpice for TI 設計和仿真工具中,您可以搜索 TI (...)
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| VQFN (RGC) | 64 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。