亚洲AV国产精品色午夜洪2,欧美国产日产免费视频流畅,免费麻豆国产黄网站在线观看

ZHCSN72 june 2023 TPSI2072-Q1

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

DWQ|11
- MPSS144A

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

zhcsn72_oa

6.6 Insulation Specifications

PARAMETER		TEST CONDITIONS	VALUE	UNIT
IEC 60664-1
CLR	External clearance⁽¹⁾	Shortest terminal-to-terminal distance through air	>8	mm
CPG	External Creepage⁽¹⁾	Shortest terminal-to-terminal distance across the package surface	>8	mm
DTI	Distance through the insulation	Minimum internal gap (internal clearance)	>10.5	μm
CTI	Comparative tracking index	DIN EN 60112 (VDE 0303-11); IEC 60112	>600	V
	Material Group	According to IEC 60664-1	I
	Overvoltage category per IEC 60664-1	Rated mains voltage ≤ 300 V_RMS	I-IV
		Rated mains voltage ≤ 600 V_RMS	I-III
		Rated mains voltage ≤ 1000 V_RMS	I-II
DIN V VDE 0884-11:2017-01⁽²⁾, IEC 60747-17:2020
V_IORM	Maximum repetitive peak isolation voltage	AC voltage (bipolar)	1414	V_PK
V_IOWM	Maximum isolation working voltage	AC voltage (sine wave)	1000	V_RMS
V_IOWM	Maximum isolation working voltage	DC voltage	1500	V_DC
V_IOTM	Maximum transient isolation voltage	V_TEST = V_IOTM, t = 60 s (qualification)	5300	V_PK
V_IOTM	Maximum transient isolation voltage	V_TEST = 1.2 × V_IOTM, t = 1 s (100% production)	6360	V_PK
V_IOSM	Maximum surge isolation voltage⁽³⁾	Tested in oil per IEC 62638-1, 1.2/50 μs waveform, V_TEST = 1.3 × V_IOSM = 6500 V_PK (qualification)	5000	V_PK
q_pd	Apparent charge⁽⁴⁾	Method a: After I/O safety test subgroup 2/3,V_ini = V_IOTM, t_ini = 60 s; V_pd(m)= 1.2 × V_IORM = 1800 V_PK, t_m = 10 s	≤5	pC
		Method a: After environmental tests subgroup 1, V_ini = V_IOTM, t_ini = 60 s; V_pd(m) = 1.3 × V_IORM = 1950 V_PK, t_m = 10 s	≤5
		Method b1: At routine test (100% production) and preconditioning (type test), V_ini = V_IOTM, t_ini = 1 s; V_pd(m) = 1.5 × V_IORM= 2250 V_PK, t_m = 1 s	≤5
C_IO	Barrier capacitance, input to output⁽⁵⁾	V_IO = 0.4 × sin (2πft), f = 1 MHz	4	pF
R_IO	Insulation resistance, input to output⁽⁵⁾	V_IO = 500 V, T_A = 25°C	>10¹²	Ω
		V_IO = 500 V, 100°C ≤ T_A ≤ 125°C	>10¹¹
		V_IO = 500 V at T_S = 150°C	>10⁹
	Pollution degree		2
	Climatic category		40/150/21
UL 1577
V_ISO	Withstand isolation voltage	V_TEST = V_ISO, t = 60 s (qualification) V_TEST = 1.2 × V_ISO, t = 1 s (100% production)	3750	V_RMS
Misc.
V_ISO	Withstand isolation voltage		5300	V_DC

(1) Creepage and clearance requirements should be applied according to the specific equipment isolation standards of an application. Care should be taken to maintain the creepage and clearance distance of a board design to ensure that the mounting pads of the isolator on the printed-circuit board do not reduce this distance. Creepage and clearance on a printed-circuit board become equal in certain cases. Techniques such as inserting grooves, ribs, or both on a printed-circuit board are used to help increase these specifications.

(2) This coupler is suitable for safe electrical insulation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits.

(3) Testing is carried out in air or oil to determine the intrinsic surge immunity of the isolation barrier.

(4) Apparent charge is electrical discharge caused by a partial discharge (pd).

(5) All pins on each side of the barrier tied together creating a two-pin device.