日韩精品成人免费观看视频,无码人妻中文字幕

ZHCSCL5D january 2014 – may 2023 TPS65262

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

RHB|32
- MPQF130D

散熱焊盤機械數據 (封裝 | 引腳)

RHB|32
- QFND029X

訂購信息

6.5 Electrical Characteristics

T_J = 25°C, VIN = 12 V, ?_SW = 600 kHz (unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
INPUT SUPPLY VOLTAGE
VIN	Input voltage range		4.5		18	V
UVLO	VIN undervoltage lockout	VIN rising	4	4.25	4.5	V
		VIN falling	3.5	3.75	4	V
		Hysteresis		500		mV
IDD_SDN	Shutdown supply current	EN1 = EN2 = EN3 = MODE = LEN1 = LEN2 = 0 V		12		μA
IDD_{Q_NSW}	Input quiescent current without buck1/2/3 switching	EN1 = EN2 = EN3 = 5V, FB1 = FB2 = FB3 = 0.8 V, LEN1 = LEN2 = 0 V		790		μA
IDD_{Q_NSW1}		EN1 = 5 V, EN2 = EN3 = 0 V, FB1 = 0.8 V, LEN1 = LEN2 = 0 V		340		μA
IDD_{Q_NSW2}		EN2 = 5 V, EN1 = EN3 = 0V, FB2 = 0.8 V, LEN1 = LEN2 = 0 V		370		μA
IDD_{Q_NSW3}		EN3 = 5 V, EN1 = EN2 = 0 V, FB3 = 0.8 V, LEN1 = LEN2 = 0 V		370		μA
IDD_{Q_LDO1}	LDO input quiescent current	EN1 = EN2 = EN3 = LEN2 = 0 V, LFB1 = 0.8 V, LEN1 = 5 V		190		μA
IDD_{Q_LDO2}	LDO input quiescent current	EN1 = EN2 = EN3 = LEN1 = 0 V, LFB2 = 0.8 V, LEN2 = 5 V		190		μA
V_7V	V7V LDO output voltage	V7V load current = 0 A	6.0	6.3	6.6	V
I_{OCP_V7V}	V7V LDO current limit			175		mA
FEEDBACK VOLTAGE REFERENCE
V_FB	Feedback voltage	V_COMP = 1.2 V, T_J = 25°C	0.595	0.6	0.605	V
V_FB	Feedback voltage	V_COMP = 1.2 V, T_J = -40°C to 125°C	0.594	0.6	0.606	V
V_{LINEREG_Buck}	Line regulation-DC⁽¹⁾	I_OUT1 = 1.5 A, I_OUT2 = 1 A, I_OUT3 = 1 A, 5 V < VINx < 18 V		0.002		%/V
V_{LOADREG_Buck}	Load regulation-DC⁽¹⁾	V_IN = 12 V, I_OUTx = (10-100%) × I_{OUTx_max}		0.02		%/A
BUCK1, BUCK2, BUCK3
V_ENXH	EN1/2/3 high level input voltage			1.2	1.26	V
V_ENXL	EN1/2/3 low level input voltage		1.1	1.15		V
I_ENX	EN1/2/3 pull-up current	ENx = 1 V		3.6		μA
I_ENX	EN1/2/3 pull-up current	ENx = 1.5 V		6.6		μA
I_ENhys	Hysteresis current			3		μA
I_SS1	Buck1 soft start charging current		4.3	5	6	μA
T_SS2/3	Buck2/3 soft start time			1		ms
T_{ON_MIN}	Minimum on time			80	100	ns
G_{m_EA1/2/3}	Error amplifier trans-conductance	–2 μA < I_COMPX < 2 μA		300		μS
G_{m_PS1/2/3}	COMP voltage to inductor current G_m⁽¹⁾	I_LX = 0.5 A		7.4		A/V
I_LIMIT1	Buck1 peak inductor current limit		4.4	5.1	6.06	A
I_LIMITSOURCE1	Buck1 low side source current limit			4.4		A
I_LIMITS1	Buck1 low side sink current limit			1.3		A
I_LIMIT2/3	Buck2/3 peak inductor current limit		1.8	2.4	3	A
I_{LIMITSOURCE2/3}	Buck2/3 low side source current limit			1.75		A
I_LIMITS2/3	Buck2/3 low side sink current limit			1		A
T_{Hiccup_wait}	OC wait time⁽¹⁾			0.5		ms
T_{Hiccup_re}	Hiccup time before re-start⁽¹⁾			14		ms
Rdson_HS1	Buck1 High-side switch resistance	VIN1 = 12 V		100		m?
Rdson_LS1	Buck1 low-side switch resistance	VIN1 = 12 V		65		m?
Rdson_HS2	Buck2 High-side switch resistance	VIN1 = 12 V		195		m?
Rdson_LS2	Buck2 low-side switch resistance	VIN1 = 12 V		145		m?
Rdson_HS3	Buck3 High-side switch resistance	VIN1 = 12 V		195		m?
Rdson_LS3	Buck3 low-side switch resistance	VIN1 = 12 V		145		m?
POWER GOOD, MODE, POWER SEQUENCE
V_{th_PG}	Feedback voltage threshold	FBx undervoltage falling		92.5%		V_REF
		FBx undervoltage rising		95%
		FBx overvoltage rising		107.5%
		FBx overvoltage falling		105%
T_{DEGLITCH(PG)_F}	PGOOD falling edge deglitch time			0.19		ms
T_{RDEGLITCH(PG)_R}	PGOOD rising edge deglitch time			1		ms
I_PG	PGOOD pin leakage				0.05	μA
V_{LOW_PG}	PGOOD pin low voltage	I_SINK = 1 mA			0.4	V
V_MODEH	MODE high level input voltage			1.2	1.26	V
V_MODEL	MODE low level input voltage		1.1	1.15		V
I_MODE	MODE pull-up current	MODE = 1 V		3.6		μA
I_MODE	MODE pull-up current	MODE = 1.5 V		6.6		μA
T_psdelay	Delay time between bucks at automatic power sequencing mode⁽¹⁾	MODE = 1.5 V		1.7		ms
LDO1 AND LDO2
V_LENXH	LEN1, LEN2 high-level input voltage			1.2	1.26	V
V_LENXL	LEN1, LEN2 low-level input voltage		1.1	1.15		V
I_LENX	LEN1, LEN2 pullup current	LENx = 1 V		3.6		μA
I_LENX	LEN1, LEN2 pullup current	LENx = 1.5 V		6.6		μA
VIN_LDO1	LDO input voltage range		1.3		18	V
VOUT_LDO1	LDO output voltage range	load current = 200 mA, V_IN = 12 V	1		5.5	V
V_LDOFB1	LDO voltage reference	load current = 10 mA, V_IN = 12 V	0.594	0.6	0.606	V
I_{max_LDO1}	LDO current limit		240	330		mA
V_dropout1	LDO drop out voltage	I_OUT = 20 mA		12		mV
V_dropout1	LDO drop out voltage	I_OUT = 200 mA		120		mV
V_{LINEREG_LDO1}	LDO line regulation-DC⁽¹⁾	V_OUT = 1.8 V, I_OUT = 10 mA, LVIN1 changes from 2 to 18 V		0.002		%/V
V_{LOADREG_LDO1}	LDO load regulation-DC⁽¹⁾	I_OUT = 1mA to 200mA		0.02		%/A
PSRR_LDO1	Ripple rejection⁽¹⁾	Vin_LDO1 = 12 V, V_OUT = 1.8 V, I_OUT = 10 mA, ? = 10 kHz		56		dB
VIN_LDO2	LDO input voltage range		1.3		18	V
VOUT_LDO2	LDO output voltage range	load current = 100 mA, V_IN = 12 V	1		5.5	V
V_LDOFB2	LDO voltage reference	load current = 10 mA, V_IN = 12 V	0.594	0.6	0.606	V
I_{max_LDO2}	LDO current limit		120	180		mA
V_dropout2	LDO drop out voltage	I_OUT = 10 mA		12		mV
V_dropout2	LDO drop out voltage	I_OUT = 100 mA		120		mV
V_{LINEREG_LDO2}	LDO line regulation-DC⁽¹⁾	V_OUT = 1.8 V, I_OUT = 10 mA, LVIN1 changes from 2 to 18 V		0.002		%/V
V_{LOADREG_LDO2}	LDO load regulation-DC⁽¹⁾	I_OUT = 1 to 100 mA, V_IN = 12 V		0.02		%/A
PSRR_LDO2	Ripple rejection⁽¹⁾	Vin_LDO2 = 12 V, V_OUT = 1.8 V, I_OUT = 10 mA, ? = 10 kHz		56		dB
OSCILLATOR
?_SW	Switching frequency		570	600	630	kHz
THERMAL PROTECTION
T_{TRIP_OTP}	Thermal protection trip point⁽¹⁾	Temperature rising		160		°C
T_{HYST_OTP}	Thermal protection trip point⁽¹⁾	Hysteresis		20		°C

(1) Lab validation result.