ZHCSMY9C January 2021 – December 2024 TMUX6219-Q1
PRODUCTION DATA
- 1
- 1 特性
- 2 應用
- 3 說明
- 4 Pin Configuration and Functions
-
5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Thermal Information
- 5.4 Recommended Operating Conditions
- 5.5 Source or Drain Continuous Current
- 5.6 ±15 V Dual Supply: Electrical Characteristics?
- 5.7 ±15 V Dual Supply: Switching Characteristics?
- 5.8 36 V Single Supply: Electrical Characteristics?
- 5.9 36 V Single Supply: Switching Characteristics?
- 5.10 12 V Single Supply: Electrical Characteristics?
- 5.11 12 V Single Supply: Switching Characteristics?
- 5.12 +5 V / -8 V Dual Supply: Electrical Characteristics?
- 5.13 +5 V / -8 V?Dual Supply: Switching Characteristics?
- 5.14 ±5 V Dual Supply: Electrical Characteristics?
- 5.15 ±5 V Dual Supply: Switching Characteristics?
- 5.16 Typical Characteristics
-
6 Parameter Measurement Information
- 6.1 On-Resistance
- 6.2 Off-Leakage Current
- 6.3 On-Leakage Current
- 6.4 Transition Time
- 6.5 tON(EN) and tOFF(EN)
- 6.6 Break-Before-Make
- 6.7 tON (VDD) Time
- 6.8 Propagation Delay
- 6.9 Charge Injection
- 6.10 Off Isolation
- 6.11 Crosstalk
- 6.12 Bandwidth
- 6.13 THD + Noise
- 6.14 Power Supply Rejection Ratio (PSRR)
- 7 Detailed Description
- 8 Application and Implementation
- 9 Device and Documentation Support
- 10Revision History
- 11Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
- DGK|8
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
4 Pin Configuration and Functions
Figure 4-1 DGK Package, 8-Pin VSSOP
(Top View)Table 4-1 Pin Functions
| PIN | TYPE(1) | DESCRIPTION (2) | ||
|---|---|---|---|---|
| NAME | DGK | |||
| D | 1 | I/O | Drain pin. Can be an input or output. | |
| S1 | 2 | I/O | Source pin 1. Can be an input or output. | |
| GND | 3 | P | Ground (0V) reference | |
| VDD | 4 | P | Positive power supply. This pin is the most positive power-supply potential. For reliable operation, connect a decoupling capacitor ranging from 0.1μF to 10μF between VDD and GND. | |
| EN | 5 | I | Active high logic enable, has internal pull-up resistor. When this pin is low, all switches are turned off. When this pin is high, the SEL logic input determine which switch is turned on. | |
| SEL | 6 | I | Logic control input, has internal pull-down resistor. Controls the switch connection as shown in Section 7.5. | |
| VSS | 7 | P | Negative power supply. This pin is the most negative power-supply potential. In single-supply applications, this pin can be connected to ground. For reliable operation, connect a decoupling capacitor ranging from 0.1μF to 10μF between VSS and GND. | |
| S2 | 8 | I/O | Source pin 2. Can be an input or output. | |
| Thermal Pad | — | The thermal pad is not connected internally. It is recommended that the pad be tied to GND or VSS for best performance. | ||
(1) I = input, O = output, I/O = input and output, P = power.
(2) Refer to Section 7.4 for
what to do with unused pins.