欧美黑人添添高潮A片WWW,国产又爽又大又黄A片图片,看午夜大片特色视频国产

ZHCSJX8J August 2018 – May 2021 TLV803E , TLV809E , TLV810E

PRODMIX

封裝選項

機械數(shù)據(jù) (封裝 | 引腳)

DPW|5
- MPSS088
DCK|3
- MPDS295G
DBZ|3
- MPDS108G

散熱焊盤機械數(shù)據(jù) (封裝 | 引腳)

DPW|5
- QFND567C

訂購信息

7.5 Electrical Characteristics

over operating range (T_A = –40℃ to 125℃), 1.7 V ≤ V_DD ≤ 6 V, R_pull-up = 10 kΩ to 6 V, 10 pF load at RESET pin, unless otherwise noted. Typical values are at 25℃, V_DD = 3.3V and V_IT–= 2.93 V.

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
COMMON PARAMETERS
V_DD	Input supply voltage		1.7		6	V
V_IT–	Input threshold voltage accuracy	T_A= –40℃ to 125℃	–2	0.5	2	%
V_HYS	Hysteresis voltage	Hysteresis from V_IT–	0.9	1.2	1.5	%
I_DD	Supply current into VDD pin	V_DD = 3.3 V; V_DD> V_IT+ ⁽¹⁾		0.25	1	μA
I_DD	Supply current into VDD pin	V_DD= 6 V		0.4	1.2	μA
R_MR	Manual reset pin internal pull-up resistance	X2SON (DPW) package only		100		kΩ
V_{MR_L}	Manual reset pin logic low input				0.4	V
V_{MR_H}	Manual reset pin logic high input		0.8V_DD			V
TLV809E (Push-Pull Active-Low)
V_POR	Power on reset voltage ⁽²⁾	V_OL ≤ 300 mV, I_OUT(Sink) = 15 μA			700	mV
V_OL	Low level output voltage	V_DD = 1.7 V, V_DD < V_IT–, I_OUT(Sink) = 500 μA			300	mV
V_OL	Low level output voltage	V_DD= 3.3 V, V_DD < V_IT–, I_OUT(Sink) = 2 mA			300	mV
V_OH	High level output voltage	V_DD = 6 V, V_DD > V_IT+, I_OUT(Source) = 4 mA	0.8V_DD			V
V_OH	High level output voltage	V_DD = 3.3 V, V_DD > V_IT+, I_OUT(Source) = 2 mA	0.8V_DD			V
TLV803E (Open-Drain Active-Low)
V_POR	Power on reset voltage ⁽²⁾	V_OL≤ 300 mV, I_OUT(Sink) = 15 μA			700	mV
V_OL	Low level output voltage	V_DD = 1.7 V, V_DD < V_IT–, I_OUT(Sink) = 500 μA			300	mV
V_OL	Low level output voltage	V_DD = 3.3 V, V_DD < V_IT–, I_OUT(Sink) = 2 mA			300	mV
I_lkg(OD)	Open drain output leakage current	V_DD = V_PULLUP = 6 V, V_DD> V_IT+		100	350	nA
TLV810E (Push-Pull Active-High)
V_OH	High level output voltage	V_DD= 3.3 V, V_DD < V_IT–, I_OUT(Source) = 2 mA	0.8V_DD			V
V_OH	High level output voltage	V_DD = 1.7 V, V_DD < V_IT–, I_OUT(Source) = 500 μA	0.8V_DD			V
V_POR	Power on Reset Voltage	V_OH ≥ 720 mV, I_OUT(Source) = 15 μA			900	mV
V_OL	Low level output voltage	V_DD = 6 V, V_DD > V_IT+, I_OUT(Sink) = 2 mA			300	mV
V_OL	Low level output voltage	V_DD= 3.3 V, V_DD > V_IT+, I_OUT(Sink) = 500 μA			300	mV

(1) V_IT+ = V_IT–+ V_HYS

(2) Minimum V_DD voltage for a controlled output state. Below V_POR, the output cannot be determined.