ZHCSIB4D October 2003 – May 2025 SN74CB3T3245
PRODUCTION DATA
請(qǐng)參考 PDF 數(shù)據(jù)表獲取器件具體的封裝圖。
The power supply can be any voltage between the minimum and maximum supply voltage rating located in the Recommended Operating Conditions.
Each VCC terminal must have a good bypass capacitor to prevent power disturbance. For devices with a single supply, TI recommends a 0.1μF bypass capacitor. If there are multiple pins labeled VCC, then TI recommends a 0.01μF or 0.022μF capacitor for each VCC because the VCC pins are tied together internally. For devices with dual supply pins operating at different voltages, for example VCC and VDD, a 0.1μF bypass capacitor is recommended for each supply pin. Paralleling multiple bypass capacitors to reject different frequencies of noise is acceptable. 0.1μF and 1μF capacitors are commonly used in parallel. For best results, install the bypass capacitor as close to the power terminal.