4 Revision History
Changes from Revision H (June 2018) to Revision I (October 2020)
- 將 u*jrBGA ZQE 更改為 nFBGA ZXHGo
- Changed u*jr ZQE to nFBGA ZXHGo
- Changed u*jr ZQE to nFBGA ZXH. Updated thermal
informationGo
- Changed u*jr ZQE to nFBGA ZXHGo
Changes from Revision G (June 2015) to Revision H (June 2018)
- Deleted figure RESET and Initialization Timing Definition While VCC is High
Go
- Changed the paragraph following Figure 7-3
Go
- Changed Recommended Initialization Sequence To: Initialization Sequence
Go
- Changed Table 7-2
Go
- Changed item 3 in Video Stop and Restart Sequence From: Drive all DSI input lanes including DSI CLK lane to LP11. To: Drive all DSI data lanes to LP11, but keep the DSI CLK lanes in HS. Go
Changes from Revision F (May 2015) to Revision G (June 2015)
- Moved Recommended Initialization Setup Sequence
Go
- Changed SN65DSI83 DSI Lane Merging Illustration back to original imageGo
Changes from Revision E (October 2013) to Revision F (May 2015)
- 添加了引腳配置和功能 部分、ESD 等級 表、特性說明 部分、器件功能模式、應用和實施 部分、電源相關建議 部分、布局 部分、器件和文檔支持 部分以及機械、封裝和可訂購信息 部分Go
- 根據全新 TI 標準更新了數據表，添加了章節并重新編排了內容Go
- Updated the SN65DSI83 FlatLink Timing Definitions diagramGo
- Changed Functional Block Diagram
Go
- Changed SN65DSI83 DSI Lane Merging Illustration
Go
- Changed from: 1366 × 768 WXGA to:1280 × 800 WXGA Go
- Changed Design Parameters table valuesGo
- Changed Detailed Design Procedure values and textGo
- Changed Example Script subsection Go
Changes from Revision D (December 2012) to Revision E (October 2013)
- 將狀態從“產品預發布”更改為“量產數據”Go
- Added rows for bits 7 and 6:5 to Table 7-6 CSR Bit Field Definitions - DSI RegistersGo
- Added row for Bit 4 to Table 7-7 CSR Bit Field Definitions - LVDS RegistersGo
Changes from Revision A (September 2012) to Revision B (December 2012)
- Changed the value of VOH From: 1.3 MIN To: 1.25 MINGo
- Changed the ICC TYP value From: TBD To: 77 and MAX value From: TBD To: 112 Go
- Added a TYP value of 7.7 to IULPS
Go
- Changed the IRST TYP value From: 0.05 To: 0.04 and MAX value From: 0.2 To: 0.06Go
- changed the values of |VOD|Go
- Changed the values of VOC(SS) for test conditions CSR 0x19.6 = 0Go
- Added table note 2Go
- Added table note 3Go
- Changed the tsetup and thold NOM value of 1.5 to a MIN value of 1.5Go
- Changed the SWITCHING CHARACTERISTICS tableGo
- Changed the description of CHA_LVDS_VOD_SWINGGo
Changes from Revision * (August 2012) to Revision A (September 2012)
- 將“特性”從“最大分辨率高達 60fps WUXGA 1920 × 1200（18bpp 和 24bpp 彩色），縮短消隱時間。適合 60fps 1366 × 768（18bpp 和 24bpp）”更改為“最大分辨率高達 60fps WUXGA 1920 × 1200（18bpp 和 24bpp 彩色），縮短消隱時間。適合 60fps 1366 × 768/1280 × 800（18bpp 和 24bpp）”Go
- 更改了“說明”部分第二段中的文本，從“使用 60fps 1366 × 768（18bpp 和 24bpp）的應用?！毙薷臑椤笆褂?60fps 1366 × 768/1280 × 800（18bpp 和 24bpp）的應用?！?/span>Go