ZHCSQG1H November 2009 – May 2022 LMP8645 , LMP8645HV
PRODUCTION DATA
- 1 特性
- 2 應用
- 3 說明
- 4 Revision History
- 5 Pin Configuration and Functions
- 6 Specifications
- 7 Detailed Description
- 8 Application and Implementation
- 9 Power Supply Recommendations
- 10Layout
- 11Device and Documentation Support
- 12Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
- DDC|6
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
7.4.2.2 Range 2: VCM is 1.8 V to VS
In this range, the maximum voltage at the RG pin is related to the common-mode voltage and VSENSE. So all the RGAIN resistor values which respect the following inequalities are allowed:
Equation 5. VRG ≤ min (Vout_max; (VCM – Vsense– 250 mV))
where
- VRG = VSENSE * RGAIN * Gm
- Vout_max is the maximum allowable output voltage according to the Section 6.5, Section 6.6, and Section 6.7.
The graphical representation in Figure 7-4 helps in the selection.
All the combinations (VSENSE, RGAIN) below the curves for given VCM and supply voltage are allowed.
Figure 7-4 Allowed Gains for Range 2Also in this range, once selected, the RGAIN (Gain) and the VSENSE range is fixed too.