ZHCSNR6G June 1999 – March 2023 LM2576 , LM2576HV
PRODUCTION DATA
- 1 特性
- 2 應用
- 3 說明
- 4 Revision History
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 Electrical Characteristics: 3.3 V
- 6.6 Electrical Characteristics: 5 V
- 6.7 Electrical Characteristics: 12 V
- 6.8 Electrical Characteristics: 15 V
- 6.9 Electrical Characteristics: Adjustable Output Voltage
- 6.10 Electrical Characteristics: All Output Voltage Versions
- 6.11 Typical Characteristics
- 7 Detailed Description
- 8 Application and Implementation
- 9 Device and Documentation Support
- 10Mechanical, Packaging, and Orderable Information
封裝選項
請參考 PDF 數據表獲取器件具體的封裝圖。
機械數據 (封裝 | 引腳)
- NDH|5
- NEB|5
- KTT|5
- KC|5
散熱焊盤機械數據 (封裝 | 引腳)
- KTT|5
訂購信息
8.2.2.2.2 Inductor Selection (L1)
- Calculate the inductor Volt ? microsecond constant, E ? T (V ? μs), from Equation 9:
Equation 9.
Calculate E ? T (V ? μs)
Equation 10.
- Use the E ? T value from the previous formula and match it with the E ? T number on the vertical axis of the Inductor value selection guide shown in Figure 8-8.
E ? T = 115 V ? μs
- On the horizontal axis, select the maximum load current.
ILOAD(Max) = 3 A
- Identify the inductance region intersected by the E ? T value and the maximum load current value, and note the inductor code for that region.
Inductance Region = H150
- Identify the inductor value from the inductor code, and select an appropriate inductor from the table shown in Table 8-4. Part numbers are listed for three inductor manufacturers. The inductor chosen must be rated for operation at the LM2576 switching frequency (52 kHz) and for a current rating of 1.15 × ILOAD. For additional inductor information, see Section 8.1.2.
Inductor Value = 150 μH
Choose from AIE part #415-0936, Pulse Engineering part #PE-531115, or Renco part #RL2445.