限制18一卡二卡三卡四卡,日韩一区二区天海翼

ZHCSNF0B May 2018 – October 2021 ISOW1412 , ISOW1432

PRODMIX

封裝選項

機械數據 (封裝 | 引腳)

DFM|20
- MCSS009

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

8.11 Switching Characteristics at V_ISOOUT = 3.3 V

Min / Max specifications are over recommended operating conditions, typical values are at V_DD = V_IO = 3.3 V, MODE=GND2 ( V_ISOOUT= 3.3V), GND1 = GNDIO, GND2 = GISOIN, T_A = 25°C (unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
Driver: 500-kbps device (ISOW1412)
t_r, t_f	Differential output rise time and fall time	R_L = 54 Ω, C_L = 50 pF, see Figure 9-3	190	300	600	ns
t_PHL, t_PLH	Propagation delay	R_L = 54 Ω, C_L = 50 pF, see Figure 9-3		450	610	ns
PWD	Pulse width distortion⁽¹⁾, \|t_PHL - t_PLH\|	R_L = 54 Ω, C_L = 50 pF, see Figure 9-3		3	40	ns
t_PHZ, t_PLZ	Disable time	See Figure 9-5 and Figure 9-6		56	200	ns
t_PZH, t_PZL	Enable time	See Figure 9-5 and Figure 9-6		280	600	ns
Receiver: 500-kbps device (ISOW1412)
t_r, t_f	Output rise time and fall time	C_L = 15 pF, see Figure 9-7			4	ns
t_PHL, t_PLH	Propagation delay	C_L = 15 pF, see Figure 9-7		60	135	ns
PWD	Pulse width distortion⁽¹⁾, \|t_PHL - t_PLH\|	C_L = 15 pF, see Figure 9-7		2	15	ns
t_PHZ, t_PLZ	Disable time	See Figure 9-8 and Figure 9-9		9	30	ns
t_PZH, t_PZL	Enable time	See Figure 9-8 and Figure 9-9		8	30	ns
Driver: 12-Mbps device (ISOW1432)
t_r, t_f	Differential output rise time and fall time	R_L = 54 Ω, C_L = 50 pF, see Figure 9-3	6	15	25	ns
t_PHL	Propagation delay	R_L = 54 Ω, C_L = 50 pF, see Figure 9-3		49	125	ns
t_PLH	Propagation delay	R_L = 54 Ω, C_L = 50 pF, see Figure 9-3		49	125	ns
t_PHL, t_PLH	Propagation delay	R_L = 54 Ω, C_L = 50 pF, see Figure 9-3		52	125	ns
PWD	Pulse width distortion⁽¹⁾, \|t_PHL - t_PLH\|	R_L = 54 Ω, C_L = 50 pF, see Figure 9-3		1	10	ns
t_PHZ	Disable time	See Figure 9-5 and Figure 9-6		35	125	ns
t_PLZ	Disable time	See Figure 9-5 and Figure 9-6		35	125	ns
t_PHZ, t_PLZ	Disable time	See Figure 9-5 and Figure 9-6		36	125	ns
t_PZH	Enable time	See Figure 9-5 and Figure 9-6		46	150	ns
t_PZL	Enable time	See Figure 9-5 and Figure 9-6		36	150	ns
t_PZH, t_PZL	Enable time	See Figure 9-5 and Figure 9-6		48	150	ns
Receiver: 12-Mbps device (ISOW1432)
t_r, t_f	Output rise time and fall time	C_L = 15 pF, see Figure 9-7			4	ns
t_PHL	Propagation delay	C_L = 15 pF, see Figure 9-7		59	120	ns
t_PLH	Propagation delay	C_L = 15 pF, see Figure 9-7		59	120	ns
t_PHL, t_PLH	Propagation delay	C_L = 15 pF, see Figure 9-7		42	120	ns
PWD	Pulse width distortion⁽¹⁾, \|t_PHL - t_PLH\|	C_L = 15 pF, see Figure 9-7		1.7	10	ns
t_PHZ	Disable time	See Figure 9-8 and Figure 9-9		7	30	ns
t_PLZ	Disable time	See Figure 9-8 and Figure 9-9		6	30	ns
t_PHZ, t_PLZ	Disable time	See Figure 9-8 and Figure 9-9		9	30	ns
t_PZH	Enable time	See Figure 9-8 and Figure 9-9		6	30	ns
t_PZL	Enable time	See Figure 9-8 and Figure 9-9		5	30	ns
t_PZH, t_PZL	Enable time	See Figure 9-8 and Figure 9-9		8	30	ns
GPIO channel
t_PHL, t_PLH	Propagation delay time	See Figure 9-11		227	347	ns
PWD	Pulse width distortion, \|t_PHL - t_PLH\|			20	110	ns
t_r	Output signal rise time			1	4	ns
t_f	Output signal fall time			1	4	ns

(1) Also known as pulse skew.

封裝選項

機械數據 (封裝 | 引腳)

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

8.11 Switching Characteristics at VISOOUT = 3.3 V

8.11 Switching Characteristics at V_ISOOUT = 3.3 V