主頁 電源管理 AC/DC 和 DC/DC 轉換器（集成 FET）

TPIC74100-Q1

正在供貨

符合 AEC-Q100 標準、具有 5V 固定輸出電壓的 550kHz 1.5V 至 40V、1A 降壓/升壓轉換器

可提供此產品的更新版本

功能與比較器件相同，但引腳排列有所不同
TPS55165-Q1 正在供貨 2V 至 36V、1A 輸出、2MHz、5V 或 12V 固定輸出電壓、升壓和降壓轉換器 TPS55165 has 2-Mhz switching frequency and higher Iout

產品詳情

Rating Automotive Topology Buck-Boost Switch current limit (typ) (A) 1.5 Vin (max) (V) 40 Vin (min) (V) 1.5 Vout (max) (V) 5 Vout (min) (V) 5 Features Enable, Light-load efficiency, Power good, Synchronous rectification Switching frequency (min) (kHz) 330 Switching frequency (max) (kHz) 550 Operating temperature range (°C) -40 to 125 Iq (typ) (μA) 100 Duty cycle (max) (%) 99 Type Converter
Rating Automotive Topology Buck-Boost Switch current limit (typ) (A) 1.5 Vin (max) (V) 40 Vin (min) (V) 1.5 Vout (max) (V) 5 Vout (min) (V) 5 Features Enable, Light-load efficiency, Power good, Synchronous rectification Switching frequency (min) (kHz) 330 Switching frequency (max) (kHz) 550 Operating temperature range (°C) -40 to 125 Iq (typ) (μA) 100 Duty cycle (max) (%) 99 Type Converter
HTSSOP (PWP) 20 41.6 mm2 6.5 x 6.4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device HBM ESD Classification level 1B for
      pin 7 (L2), pin 8 (VOUT), pin 9 (5Vg)
    • Device HBM ESD Classification 2 for pins 1–6
      and 10–20
    • Device CDM ESD Classification Level C4B
  • Switch-Mode Regulator
    • 5 V ±2%, Normal Mode
    • 5 V ±3%, Low-Power or Crossover Mode
  • Switching Frequency, 440 kHz (typical)
  • Input Operating Range, 1.5 V to 40 V, (Vdriver)
    • 1-A Load-Current Capability
    • 200-mA Load-Current Capability Down to 2-V
      Input (Vdriver)
    • 120-mA Load-Current Capability Down to
      1.5-V Input (Vdriver)
  • Enable Function
  • Low-Power Operation Mode
  • Switched 5-V Regulated Output on 5Vg With
    Current Limit
  • Programmable Slew Rate and Frequency
    Modulation for EMI Consideration
  • Reset Function With Deglitch Timer and
    Programmable Delay
  • Alarm Function for Undervoltage Detection and
    Indication
  • Thermally Enhanced Package for Efficient Heat
    Management
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device HBM ESD Classification level 1B for
      pin 7 (L2), pin 8 (VOUT), pin 9 (5Vg)
    • Device HBM ESD Classification 2 for pins 1–6
      and 10–20
    • Device CDM ESD Classification Level C4B
  • Switch-Mode Regulator
    • 5 V ±2%, Normal Mode
    • 5 V ±3%, Low-Power or Crossover Mode
  • Switching Frequency, 440 kHz (typical)
  • Input Operating Range, 1.5 V to 40 V, (Vdriver)
    • 1-A Load-Current Capability
    • 200-mA Load-Current Capability Down to 2-V
      Input (Vdriver)
    • 120-mA Load-Current Capability Down to
      1.5-V Input (Vdriver)
  • Enable Function
  • Low-Power Operation Mode
  • Switched 5-V Regulated Output on 5Vg With
    Current Limit
  • Programmable Slew Rate and Frequency
    Modulation for EMI Consideration
  • Reset Function With Deglitch Timer and
    Programmable Delay
  • Alarm Function for Undervoltage Detection and
    Indication
  • Thermally Enhanced Package for Efficient Heat
    Management

The TPIC74100 is a switch-mode regulator with integrated switches for voltage-mode control. With the aid of external components (LC combination), the device regulates the output to 5 V ±3% for a wide input-voltage range.

The TPIC74100 offers a reset function to detect and indicate when the 5-V output rail is outside of the specified tolerance. This reset delay is programmable using an external timing capacitor on the REST pin. Additionally, an alarm (AOUT) feature is activated when the input supply rail Vdriver is below a prescaled specified value (set by the AIN pin).

The TPIC74100 has a frequency-modulation scheme to minimize EMI. The clock modulator permits a modulation of the switching frequency to reduce interference energy in the frequency band.

The 5Vg output is a switched 5-V regulated output with internal current limiting to prevent RESET from being asserted when powering a capacitive load on the supply line. This function is controlled by the 5Vg_ENABLE pin. If there is a short to ground on this output (5Vg output), the output self-protects by operating in a chopping mode. This does, however, increase the output ripple voltage on VOUT during this fault condition.

The TPIC74100 is a switch-mode regulator with integrated switches for voltage-mode control. With the aid of external components (LC combination), the device regulates the output to 5 V ±3% for a wide input-voltage range.

The TPIC74100 offers a reset function to detect and indicate when the 5-V output rail is outside of the specified tolerance. This reset delay is programmable using an external timing capacitor on the REST pin. Additionally, an alarm (AOUT) feature is activated when the input supply rail Vdriver is below a prescaled specified value (set by the AIN pin).

The TPIC74100 has a frequency-modulation scheme to minimize EMI. The clock modulator permits a modulation of the switching frequency to reduce interference energy in the frequency band.

The 5Vg output is a switched 5-V regulated output with internal current limiting to prevent RESET from being asserted when powering a capacitive load on the supply line. This function is controlled by the 5Vg_ENABLE pin. If there is a short to ground on this output (5Vg output), the output self-protects by operating in a chopping mode. This does, however, increase the output ripple voltage on VOUT during this fault condition.
下載 觀看帶字幕的視頻 視頻

您可能感興趣的相似產品

功能與比較器件相同，但引腳排列有所不同
TPS552872-Q1 正在供貨 汽車級、36V、4A 完全集成式降壓/升壓轉換器 36-V, 4-A full integrated buck-boost converter, AEC-Q100 qualified
TPS55289 正在供貨 具有 I2C 接口的 30V 8A 降壓/升壓轉換器 Better power efficiency and higher Iout
TPS552892 正在供貨 36V 8A 完全集成式降壓/升壓轉換器 Better power efficiency and higher Iout
TPS552892-Q1 正在供貨 汽車類、36V、8A 完全集成式降壓/升壓轉換器 Better power efficiency and higher Iout

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 5
類型 標題 下載最新的英語版本 日期
* 數據表 TPIC74100-Q1 Buck and Boost Switch-Mode Regulator 數據表 (Rev. B) PDF | HTML 2014年 12月 5日
EVM 用戶指南 TPIC74100EVM User's Guide (Rev. A) PDF | HTML 2022年 7月 11日
應用手冊 Improve the TPIC74100 Load Transient Performance with Suitable Inductor and Capa 2018年 8月 23日
技術文章 Solving voltage transient challenges with an integrated buck-boost converter PDF | HTML 2018年 3月 12日
應用手冊 TPIC74100-Q1 Buck/Boost Switch Mode Regulator (Rev. B) 2010年 9月 22日

設計和開發

如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。

評估板

TPIC74100EVM — TPIC74100EVM 評估模塊

德州儀器 (TI) TPIC74100EVM 評估模塊 (EVM) 可幫助設計人員評估 TPIC74100 開關模式電源降壓穩壓器的運行情況和性能。該 EVM 包含一個 DC/DC 轉換器。

用戶指南: PDF | HTML
View Options
仿真模型

TPIC74100 TINA Transient reference design

SLIM325.TSC (366 KB) - TINA-TI Reference Design
下載
仿真模型

TPIC74100-Q1 PSpice Transient Model

SLIM313.ZIP (73 KB) - PSpice Model
下載
仿真模型

TPIC74100-Q1 TINA-TI Transient Spice Model

SLIM326.ZIP (44 KB) - TINA-TI Spice Model
下載
封裝 引腳 CAD 符號、封裝和 3D 模型
HTSSOP (PWP) 20 Ultra Librarian

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點

推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。

支持和培訓

視頻