LP8869-Q1
- AEC-Q100 Qualified for automotive applications:
- Device temperature grade 1:
–40°C to +125°C, TA
- Device temperature grade 1:
- Functional safety capable
- Documentation available to aid functional safety system design
- 3-, 4-Channel 120-mA current sinks
- High dimming ratio of 10 000:1 at 100 Hz
- Current matching 1% (typical)
- LED String current up to 120 mA per channel
- Outputs can be combined externally for higher current per string
- Integrated boost and SEPIC converter for LED string power
- Input voltage operating range 4.5 V to 40 V
- Output voltage up to 45 V
- Integrated 3.3-A Switch FET
- Switching frequency 300 kHz to 2.2 MHz
- Switching synchronization input
- Spread spectrum for lower EMI
- Fault detection and protection
- Fault output
- Input voltage OVP, UVLO and OCP
- Boost block SW OVP and output OVP
- LED open and short fault detection
- Power-Line FET control for battery bus protection
- Automatic LED current reduction with external temperature sensor
- Thermal shutdown
The LP8867-Q1, LP8869-Q1 is an automotive highly-integrated, low-EMI, easy-to-use LED driver with DC-DC converter. The DC-DC converter supports both boost and SEPIC mode operation. The device has four or three high-precision current sinks that can be combined for higher current capability.
The DC-DC converter has adaptive output voltage control based on the LED forward voltages. This feature minimizes the power consumption by adjusting the voltage to the lowest sufficient level in all conditions. For EMI reduction DC-DC supports spread spectrum for switching frequency and an external synchronization with dedicated pin. A wide-range adjustable frequency allows the LP886x-Q1 to avoid disturbance for sensitive frequency band.
The input voltage range for the LP886x-Q1 is from 4.5 V to 40 V to support automotive start-stop and load dump condition. The LP886x-Q1 integrates extensive fault detection features.
技術文檔
| 類型 | 標題 | 下載最新的英語版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 數據表 | LP8867-Q1, LP8869-Q1 Low EMI Automotive LED Driver with 4-, 3- Channels 數據表 (Rev. B) | PDF | HTML | 2020年 1月 16日 | ||
| 白皮書 | Selecting Functional Safety Products for Automotive and Industrial ApplicationsK | 2020年 6月 9日 | ||||
| 白皮書 | Selecting Functional Safety Products for Automotive and Industrial ApplicationsN | 2020年 6月 9日 | ||||
| 白皮書 | 簡化汽車和工業中的功能性安全認證 | 英語版 | 2020年 6月 9日 | |||
| 功能安全信息 | LP886x-Q1 Functional Safety FIT Rate and Failure Mode Distribution (Rev. A) | 2020年 2月 14日 | ||||
| 應用手冊 | Some Guidelines and Tips for the LED Driver Application | 2019年 8月 14日 | ||||
| EVM 用戶指南 | LP8867-Q1 Evaluation Module User's Guide | 2018年 12月 9日 |
設計和開發
如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。
LP8867Q1EVM — 適用于汽車照明的四通道 LED 驅動器評估模塊；
PSPICE-FOR-TI — PSpice? for TI 設計和仿真工具
借助?PSpice for TI 的設計和仿真環境及其內置的模型庫，您可對復雜的混合信號設計進行仿真。創建完整的終端設備設計和原型解決方案，然后再進行布局和制造，可縮短產品上市時間并降低開發成本。?
在?PSpice for TI 設計和仿真工具中，您可以搜索 TI (...)
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| HTSSOP (PWP) | 20 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。