TFT-LCD 單路、16V、軌到軌高輸出運算放大器

LMH6640 不推薦用于新設計
該產品會持續為現有客戶提供。新設計應考慮替代產品。
功能與比較器件相似
LMH6642 正在供貨 單通道、低功耗、130MHz、75mA 軌到軌輸出放大器 INA121 has lower offset and higher CMRR, with half the power consumption

產品詳情

Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16 GBW (typ) (MHz) 190 BW at Acl (MHz) 190 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/μs) 170 Vn at flatband (typ) (nV√Hz) 15 Vn at 1 kHz (typ) (nV√Hz) 10 Iq per channel (typ) (mA) 4 Vos (offset voltage at 25°C) (max) (mV) 1 Rail-to-rail In to V-, Out Features C-Load Drive Rating Catalog Operating temperature range (°C) to CMRR (typ) (dB) 90 Input bias current (max) (pA) 2600000 Offset drift (typ) (μV/°C) 0 Iout (typ) (mA) 110 2nd harmonic (dBc) 71 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 5
Architecture Voltage FB Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 4.5 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 16 GBW (typ) (MHz) 190 BW at Acl (MHz) 190 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/μs) 170 Vn at flatband (typ) (nV√Hz) 15 Vn at 1 kHz (typ) (nV√Hz) 10 Iq per channel (typ) (mA) 4 Vos (offset voltage at 25°C) (max) (mV) 1 Rail-to-rail In to V-, Out Features C-Load Drive Rating Catalog Operating temperature range (°C) to CMRR (typ) (dB) 90 Input bias current (max) (pA) 2600000 Offset drift (typ) (μV/°C) 0 Iout (typ) (mA) 110 2nd harmonic (dBc) 71 3rd harmonic (dBc) 72 Frequency of harmonic distortion measurement (MHz) 5
SOT-23 (DBV) 5 8.12 mm2 2.9 x 2.8
  • (VS = 16V, RL= 2 k? to V+/2, 25°C, Typical Values Unless Specified)
  • Supply current (no load) 4 mA
  • Output resistance (closed loop 1 MHz) 0.35?
  • ?3 dB BW (AV = 1) 190 MHz
  • Settling time (±0.1%, 2 VPP) 35 ns
  • Input common mode voltage ?0.3V to 15.1V
  • Output voltage swing 100 mV from rails
  • Linear output current ±100 mA
  • Total harmonic distortion (2 VPP, 5 MHz) ?64 dBc
  • Fully characterized for: 5V & 16V
  • No output phase reversal with CMVR exceeded
  • Differential gain (RL = 150?) 0.12%
  • Differential phase (RL = 150?) 0.12°

All trademarks are the property of their respective owners.

  • (VS = 16V, RL= 2 k? to V+/2, 25°C, Typical Values Unless Specified)
  • Supply current (no load) 4 mA
  • Output resistance (closed loop 1 MHz) 0.35?
  • ?3 dB BW (AV = 1) 190 MHz
  • Settling time (±0.1%, 2 VPP) 35 ns
  • Input common mode voltage ?0.3V to 15.1V
  • Output voltage swing 100 mV from rails
  • Linear output current ±100 mA
  • Total harmonic distortion (2 VPP, 5 MHz) ?64 dBc
  • Fully characterized for: 5V & 16V
  • No output phase reversal with CMVR exceeded
  • Differential gain (RL = 150?) 0.12%
  • Differential phase (RL = 150?) 0.12°

All trademarks are the property of their respective owners.

The LMH6640 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 100 mA. Employing TI’s patented VIP10 process, the LMH6640 delivers a bandwidth of 190 MHz at a current consumption of only 4mA. An input common mode voltage range extending to 0.3V below the V− and to within 0.9V of V+, makes the LMH6640 a true single supply op-amp. The output voltage range extends to within 100 mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications.

The LMH6640 offers a slew rate of 170 V/µs resulting in a full power bandwidth of approximately 28 MHz with 5V single supply (2 VPP, −1 dB). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including total harmonic distortion of −64 dBc @ 5 MHz, differential gain of 0.12% and differential phase of 0.12°.

The LMH6640 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 100 mA. Employing TI’s patented VIP10 process, the LMH6640 delivers a bandwidth of 190 MHz at a current consumption of only 4mA. An input common mode voltage range extending to 0.3V below the V− and to within 0.9V of V+, makes the LMH6640 a true single supply op-amp. The output voltage range extends to within 100 mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications.

The LMH6640 offers a slew rate of 170 V/µs resulting in a full power bandwidth of approximately 28 MHz with 5V single supply (2 VPP, −1 dB). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including total harmonic distortion of −64 dBc @ 5 MHz, differential gain of 0.12% and differential phase of 0.12°.
下載

技術文檔

star =有關此產品的 TI 精選熱門文檔
未找到結果。請清除搜索并重試。
查看全部 1
類型 標題 下載最新的英語版本 日期
* 數據表 LMH6640 TFT-LCD Single, 16V Rail-to-Rail High Output Operational Amplifier 數據表 (Rev. B) 2013年 3月 18日

訂購和質量

包含信息：
  • RoHS
  • REACH
  • 器件標識
  • 引腳鍍層/焊球材料
  • MSL 等級/回流焊峰值溫度
  • MTBF/時基故障估算
  • 材料成分
  • 鑒定摘要
  • 持續可靠性監測
包含信息：
  • 制造廠地點
  • 封裝廠地點