CC8520
- Built-in Audio Protoco
- CD-Quality Uncompressed Audio
- Excellent Robustness and Co-Existence Through Multiple Techniques
- Adaptive Frequency Hopping
- Forward ErrorCorrection
- Buffering and Retransmission
- Error Concealment
- Optional High Quality Audio Compression
- No Software Development Needed When Used in Autonomous Mode
- External System
- Can be Used Autonomously, or can be Controlled by an
External Host MCU for Greatest Flexibility - Seamless Connection and Control of External Audio Codecs, DACs/ADCs and Digital Audio Amplifiers
Using I2S and I2C - HID Functions Like Power Control, Pairing, Volume Control,
Audio Channel Selection eand so on. Can be Mapped to I/Os - RoHS Compliant 6 mm x 6 mm QFN-40 Package
- Can be Used Autonomously, or can be Controlled by an
- RF Section
- 5 or 2 Mbps Over-the-Air Data Rate
- Bandwidth-Efficient Modulation Format
- Excellent Link budget with Programmable Output Power
up to +3.5 dBm and –83 or –86 dBm Sensitivity - Seamless Support for CC2590 Range Extender (+11 dBm Output Power,
–87 dBm Sensitivity) - Suited for Systems Targeting Compliance with Worldwide
Radio Frequency Regulations: ETSI EN 300 328 and EN 300 440 class 2
(Europe)FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan)
- Digital Audio Support
- Digital I2S Audio Interface Supports 1 or 2
Audio Channels for the CC8520 and 1 to 4 Audio Channels for
the CC8530 at Sample Rates of 32, 40.275, 44.1 and 48 kHz, and Supports 16 and 24 bit Word-Widths - Digital I2S Audio Interface Supports 1 or 2 Audio Channels
for the CC8520 and 1 to 4 Audio Channels for the CC8530 at Sample Rates
of 32, 40.275, 44.1 and 48 kHz, and Supports 16 and 24 bit Word-Widths - Audio Latency Down to 10.7 ms
- Data Side-Channel Allows Data to be Sent Alongside the Audio
Between External Host Processors
- Digital I2S Audio Interface Supports 1 or 2
- USB
- Full-Speed USB Audio Device
- USB Basic Audio Device Class: HT1, HS1 and MT topologies
(Headphone, Headset and Microphone) - USB Audio Device Class
- Basic USB HID Device Class Support for Remote Control, Mouse
and Keyboard Functionality - Autonomous Operation Only
- Development Tools
- PC-Based PurePath? Wireless Configurator for CC85xx Configuration
- CC85xx Family User Guide
- CC85XXDK Audio Development Kit
- CC85XXDK-HEADSET Development Kit
The PurePath™ Wireless platform is a cost-effective and low-power solution optimized for wireless transmission of high-quality digital audio.
The CC85xx includes a robust built-in wireless audio transmission protocol and can control selected external audio devices. Utilizing numerous coexistence mechanisms allows the CC85xx to avoid interfering with, or being interfered by other 2.4 GHz radio systems.
The CC85xx operates autonomously, and can be used with or without an external MCU. An external host processor can be connected through SPI and control some aspects of its operation. The CC85xx interfaces easily with other TI audio ICs and DSPs (using I2S and DSP/TDM interfaces). More details can be found in the CC85xx Family User Guide.
技術文檔
設計和開發
如需其他信息或資源，請點擊以下任一標題進入詳情頁面查看（如有）。
PUREPATH-WL-CFG — PurePath? 無線配置器
PurePath 無線配置器 (PPWC) 是與 CC85XX 器件結合使用的圖形 PC 工具，不需要額外的第三方工具。PPWC 使用經過預先編譯的映像文件。根據用戶的輸入，PPWC 將安裝這些文件的補丁程序以生成可下載的固件映像。然后設計人員能夠通過 CC 調試器工具（內置于 CC85XXDK 中）直接從 PPWC 對 CC85XX 器件進行編程，或?qū)⑵漭敵鰹?Intel (...)
PUREPATH-WL-CMD — PurePath Wireless Commander
Production Test Functionality
The production test functionality can be used for mass production tests controlled from a PC environment. The following (...)
TIDA-00232 — 無線超低音放大器參考設計
CC85XXDK-HEADSET-RD — PurePath 無線耳機參考設計
| 封裝 | 引腳 | CAD 符號、封裝和 3D 模型 |
|---|---|---|
| VQFN (RHA) | 40 | Ultra Librarian |
訂購和質量
- RoHS
- REACH
- 器件標識
- 引腳鍍層/焊球材料
- MSL 等級/回流焊峰值溫度
- MTBF/時基故障估算
- 材料成分
- 鑒定摘要
- 持續可靠性監測
- 制造廠地點
- 封裝廠地點
推薦產品可能包含與 TI 此產品相關的參數、評估模塊或參考設計。