国产18在线观看17c,a v 在线视频亚洲免费,午夜激情免费影院

ZHCSOZ7A june 2022 – august 2023 TPS7B4255-Q1

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

DYB|5
- MPSS134
DBV|5
- MPDS018T

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

6.5 Electrical Characteristics

specified at T_J = –40°C to +150°C, V_IN= 13.5 V, I_OUT= 100 μA, C_OUT = 1 μF, 1 mΩ ≤ C_OUT ESR ≤ 3 Ω, C_IN= 1 μF, and V_ADJ = 5 V (unless otherwise noted); typical values are at T_J= 25°C

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
ΔV_OUT	Output voltage tracking accuracy	V_IN = V_OUT+ 600 mV to 40 V, I_OUT = 100 μA to 70 mA	–5		5	mV
ΔV_OUT(ΔVIN)	Line regulation	V_IN = V_OUT+ 600 mV to 40 V			0.5	mV
ΔV_OUT(ΔIOUT)	Load regulation	V_IN = V_OUT+ 600 mV, I_OUT = 100 μA to 70 mA ⁽¹⁾			0.6	mV
I_Q	Quiescent current	V_IN = 5.6 V to 40 V, I_OUT = 100 μA, T_J= 25oC		35	40	μA
		V_IN = 5.6 V to 40 V, I_OUT = 100 μA, -40oC < T_J< 85oC			45
		V_IN = 5.6 V to 40 V, I_OUT = 100 μA			50
I_GND	Ground current	V_IN = 5.6 V to 40 V, I_OUT = 70 mA, T_J= 25oC			470
I_GND	Ground current	V_IN = 5.6 V to 40 V, I_OUT = 70 mA			550
V_DO	Dropout voltage	I_OUT = 70 mA, V_ADJ ≥ 5 V, V_IN= V_ADJ			500	mV
V_DO	Dropout voltage	I_OUT = 50 mA, V_ADJ ≥ 5 V, V_IN= V_ADJ			365	mV
I_SHUTDOWN	Shutdown supply current (I_GND)	V_ADJ/EN = 0 V			3.25	μA
I_ADJ/EN	ADJ/EN pin current				0.3	μA
V_UVLO(RISING)	Rising input supply UVLO	V_IN rising	2.6	2.7	2.81	V
V_{UVLO(FALLING)}	Falling input supply UVLO	V_IN falling	2.3	2.4	2.5	V
V_UVLO(HYST)	V_UVLO(IN) hysteresis			300		mV
V_IL	Adjustable and enable logic input low level				0.85	V
V_IH	Adjustable and enable logic input high level		1.75			V
I_CL	Output current limit	V_IN = V_OUT + 1 V, V_OUT short to 90% x V_ADJ	75	105	130	mA
PSRR	Power-supply ripple rejection	V_IN - V_OUT = 1 V, frequency = 100 Hz, I_OUT = 70 mA		80		dB
V_n	Output noise voltage	V_OUT = 3.3 V, I_OUT = 1 mA, BW = 10 Hz to 100 kHz, a 5 μV_RMS reference is used for this measurement		150		μV_RMS
I_REV	Reverse current at V_IN	V_IN = 0 V, V_OUT = 20 V, V_ADJ = 5 V	-0.25		0.25	μA
I_REV-N1	Reverse current at negative V_IN	V_IN = –20 V, V_OUT = 20 V, V_ADJ = 5 V	-0.5		0.5
I_REV-N2	Reverse current at negative V_IN	V_IN = –20 V, V_OUT = 0 V, V_ADJ = 5 V	-0.5		0.5
T_J	Junction temperature		–40		150	°C
T_SD(SHUTDOWN)	Junction shutdown temperature			175		°C
T_SD(HYST)	Hysteresis of thermal shutdown			15		°C

(1) Power dissipation is limited to 2 W for device production testing purposes. The power dissipation can be higher during normal operation. Please see the thermal dissipation section for more information on how much power the device can dissipate while maintaining a junction temperature below 150℃.