成年网站视频在线观看 ,女人高潮A片春色,骚虎视频在线观看

ZHCSPP1 May 2022 TPS7A16A

PRODUCTION DATA

封裝選項

6.5 Electrical Characteristics

at T_A= –40°C to +125°C, V_IN = V_OUT(NOM) + 500 mV or V_IN = 3 V (whichever is greater), V_EN = V_IN, I_OUT = 10 μA, C_IN = 2.2 μF, C_OUT = 2.2 μF, and FB tied to OUT (unless otherwise noted)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
V_IN	Input voltage range		3		60	V
V_REF	Internal reference	T_A = 25°C, V_FB = V_REF, V_IN = 3 V, I_OUT = 10 μA	1.169	1.193	1.217	V
V_UVLO	Undervoltage lockout threshold			2		V
V_OUT	Output voltage range	V_IN ≥ V_OUT(NOM) + 0.5 V	V_REF		18.5	V
	Overall V_OUT accuracy	V_OUT(NOM) + 0.5 V ≤ V_IN ≤ 60 V⁽¹⁾, 10 μA ≤ I_OUT ≤ 100 mA	–2%		2%
ΔV_O(ΔVI)	Line regulation	3 V ≤ V_IN ≤ 60 V		±1		%V_OUT
ΔV_O(ΔIO)	Load regulation	10 μA ≤ I_OUT ≤ 100 mA		±1		%V_OUT
V_DO	Dropout voltage	V_IN = 0.95xV_OUT(NOM), I_OUT = 20 mA		60		mV
V_DO	Dropout voltage	V_IN = 0.95 × V_OUT(NOM), I_OUT = 100 mA		265	500	mV
I_LIM	Current limit	V_OUT = 90% V_OUT(NOM), V_IN = V_OUT(NOM) + 1 V⁽³⁾	101	225	400	mA
I_LIM	Current limit	V_OUT = 90% V_OUT(NOM), V_IN = 3 V⁽⁴⁾	101	225	400	mA
I_GND	Ground current	3 V ≤ V_IN ≤ 60 V, I_OUT = 10 μA		5	15	μA
I_GND	Ground current	I_OUT = 100 mA, V_OUT = 1.2 V		60		μA
I_SHDN	Shutdown supply current	V_EN = 0.4 V, V_IN= 12 V		0.59	5.0	μA
I _FB	Feedback current⁽²⁾		–1	0	1	μA
I_EN	Enable current	3 V ≤ V_IN ≤ 12 V, V_IN = V_EN	–1	0.01	1	μA
V_{EN_HI}	Enable high-level voltage		1.2			V
V_{EN_LO}	Enable low-level voltage				0.3	V
V_IT	PG trip threshold	OUT pin floating, V_FB increasing, V_IN ≥ V_{IN_MIN}	85		95	%V_OUT
V_IT	PG trip threshold	OUT pin floating, V_FB decreasing, V_IN ≥ V_{IN_MIN}	83		93	%V_OUT
V_HYS	PG trip hysteresis			2.3		%V_OUT
V_{PG, LO}	PG output low voltage	OUT pin floating, V_FB = 80% V_REF, I_PG= 100 μA			0.4	V
I_{PG, LKG}	PG leakage current	V_PG= V_OUT(NOM)	–1		1	μA
I_DELAY	DELAY pin current			1	2	μA
PSRR	Power-supply rejection ratio	V_IN = 3 V, V_OUT(NOM) = V_REF, C_OUT = 10 μF, f = 100 Hz		50		dB
T_SD	Thermal shutdown temperature	Shutdown, temperature increasing		175		°C
T_SD	Thermal shutdown temperature	Reset, temperature decreasing		155		°C

(1) Maximum input voltage is limited to 24 V because of the package power dissipation limitations at full load (P ≈ (V_IN – V_OUT) × I_OUT =
(24 V – V_REF) × 50 mA ≈ 1.14 W). The device is capable of sourcing a maximum current of 50 mA at higher input voltages as long as the power dissipated is within the thermal limits of the package plus any external heat sinking.

(2) I_FB > 0 μA flows out of the device.

(3) For fixed output voltages only.

(4) For adjustable output only, where V_OUT = 1.2 V.

封裝選項

機械數據 (封裝 | 引腳)

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

6.5 Electrical Characteristics