4 修訂歷史記錄
Changes from C Revision (May 2016) to D Revision
- Added TI 參考設計的頂部導航圖標Go
- Added WEBENCH 鏈接Go
- Changed the minimum value for PH, 10-ns transient from –2 V to –5 VGo
Changes from B Revision (December 2014) to C Revision
- 已通篇將單位“A/V”改為“S”。Go
- Changed the DGQ and DRC package images in Pin Configuration and FunctionsGo
- Deleted 25°C from the Test conditions of Enable threshold voltage in the Electrical CharacteristicsGo
- Changed Figure 9Go
- Changed TPS54360 To: TPS54260 in Figure 27Go
- Changed TPS54360 To: TPS54260 in Figure 28Go
- Added text "Do not place a low-impedance..." and Figure 29 to the Enable and Adjusting Undervoltage Lockout sectionGo
- Changed TPS54360 To: TPS54260 in Figure 42Go
- Changed 350 µA/V To: 310 µS for gmea, and 10.5 A/V To: 10.5 S for gmps in Figure 46Go
- Changed text From: "yields an input voltage ripple of 206 mV" To: "yields an input voltage ripple of 473 mV" in the Input Capacitor sectionGo
Changes from A Revision (December 2010) to B Revision
- Added 引腳配置和功能部分，ESD 額定值表，特性 描述 部分，器件功能模式，應用和實施部分，電源相關建議部分，布局部分，器件和文檔支持部分以及機械、封裝和可訂購信息部分Go
- 為了清晰起見，已簡化首頁原理圖Go
- Deleted Junction-to-ambient thermal resistance (custom board) from Thermal InformationGo
- Added "the level set" to Fixed Frequency PWM Control descriptionGo
Changes from * Revision (March 2010) to A Revision
- Added 將 10 引腳 3mm × 3mm SON 添加到了 特性 和 說明Go
- Added SON package Go
- Added DRC thermal data to thermal table and deleted dissipation rating tableGo