4 修訂歷史記錄

Changes from C Revision (January 2017) to D Revision

• Added 將“9.3.5 反向電流保護(hù)”一節(jié)添加至 Feature DescriptionGo

Changes from B Revision (October 2017) to C Revision

• Changed internal ramp rate of 12 V/ms for output to 30 V/ms in the Hot Plug-In and In-Rush Current Control sectionGo

Changes from A Revision (March 2015) to B Revision

• Changed Figure 49: Added Logic InversionGo

Changes from * Revision (June 2014) to A Revision

• 已特性從“UL2367 認(rèn)證正在審理中”更改為“已通過 UL 2367 認(rèn)證，R_ILIM ≥ 20kΩ（最大電流為 4.81A），文件編號169910”Go
• 已將說明中的文本從“FLT 和 ENBLK 引腳”更改為“FLT 和 DMODE 引腳”。Go
• 已從器件信息表Go
• Changed Pin 1 From ENBLK To: DMODE throughout the data sheetGo
• Changed ENBLK To: DMODE in the Pin Functions table and updated the DESCRIPTION Go
• Moved the Storage Temperature From the Handling Ratings table To Absolute Maximum Ratings table Go
• Changed the Handling Ratings table To: ESD Ratings table Go
• Changed DIODE MODE INPUT (ENBLK): ACTIVE LOW To: DIODE MODE INPUT (DMODE): ACTIVE HIGH in the Electrical CharacteristicsGo
• Added Test Condition to I_(LIM): "R_(ILIM) = 20 kΩ" in the Electrical Characteristics Go
• Changed Test Condition in I_(LIM) From: "ENBLK = High; Diode Mode" To: "DMODE = High; Non-ideal Diode Mode" in the Electrical Characteristics Go
• Changed "DIODE MODE INPUT: ACTIVE LOW (ENBLK)" To: DIODE MODE INPUT: ACTIVE HIGH (DMODE)" in the Timing Requirements Go
• Changed Figure 22.Go
• Added condition R_(ILIM) = 17.8 KΩ to Figure 39 and Figure 40 Go
• Changed Figure 43. Added Figure 44, Figure 45, and Figure 46Go
• Changed Figure 48: ENBLK To: DMODE and Diode Mode To: Non-Ideal Diode ModeGo
• Changed Figure 49: ENBLK To: DMODE and Diode Mode To Non-Ideal Diode ModeGo
• Changed Equation 6 to include I_{(IMON_OS)}Go
• Change text in Diode Mode From:" ENBLK...active low terminal" To: "DMODE ...active high terminal"Go
• Changed text in the last sentence of Diode Mode From: "In this mode, the overload current..." To:"In this mode, the circuit breaker functionality.."Go
• Added the NOTE to Application and Implementation Go
• Added Note A to Figure 60 Go
• Changed Equation 37 From: V_(IN) x I_(LOAD) To: V_(IN) + I_(LOAD)Go