ZHCSE34A August 2015 – August 2015
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 Device Comparison Table
- 6 Pin Configuration and Functions
- 7 Specifications
- 8 Detailed Description
-
9 Application and Implementation
- 9.1 Application Information
- 9.2
Typical Application
- 9.2.1
Simple eFuse Protection for Set Top Boxes
- 9.2.1.1 Design Requirements
- 9.2.1.2 Detailed Design Procedure
- 9.2.1.3 Application Curves
- 9.2.1
Simple eFuse Protection for Set Top Boxes
- 10Power Supply Recommendations
- 11Layout
- 12器件和文檔支持
- 13機械、封裝和可訂購信息
封裝選項
機械數據 (封裝 | 引腳)
- DRC|10
散熱焊盤機械數據 (封裝 | 引腳)
- DRC|10
訂購信息
6 Pin Configuration and Functions
DRC Package
10-Pin VSON
Top View
Pin Functions
| PIN | DESCRIPTION | |
|---|---|---|
| NAME | NUMBER | |
| dV/dT | 1 | Connect a capacitor from this pin to GND to control the ramp rate of OUT voltage at device turn-on. |
| EN/UVLO | 2 | This is a dual function control pin. When used as an ENABLE pin and pulled down, it shuts off the internal pass MOSFET. When pulled high, it enables the device. As an UVLO pin, it can be used to program different UVLO trip point via external resistor divider. |
| GND | Thermal Pad | GND |
| ILIM | 10 | A resistor from this pin to GND will set the overload and short circuit limit. |
| NC | 9 | Not Connected Internally. Can be left floating or grounded. |
| OUT | 6-8 | Output of the device |
| VIN | 3-5 | Input supply voltage |