国产成人AV无码一区二区三区色,成人AV影片一区二区,久久久视频2019

SLVSBD0B November 2012 – June 2020 TPS2553-Q1

PRODUCTION DATA.

封裝選項

請參考 PDF 數據表獲取器件具體的封裝圖。

機械數據 (封裝 | 引腳)

DBV|6

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

zhcsai1_oa

6.5 Electrical Characteristics

over recommended operating conditions, V_EN = V_IN, R_FAULT = 10 kΩ (unless otherwise noted)

PARAMETER		TEST CONDITIONS⁽¹⁾		MIN	TYP	MAX	UNIT
POWER SWITCH
r_DS(on)	Static drain-source on-state resistance	DBV package, T_A = 25°C			85	95	mΩ
r_DS(on)	Static drain-source on-state resistance	DBV package, –40°C ≤T_A ≤125°C				135	mΩ
t_r	Rise time, output	V_IN = 6.5 V	C_L = 1 μF, R_L= 100 Ω, (see Figure 19)		1.1	1.5	ms
t_r	Rise time, output	V_IN = 2.5 V			0.7	1
t_f	Fall time, output	V_IN = 6.5 V		0.2		0.5
t_f	Fall time, output	V_IN = 2.5 V		0.2		0.5
ENABLE INPUT EN OR EN
	Enable pin turn on/off threshold			0.66		1.1	V
I_EN	Input current	V_EN = 0 V or 6.5 V, V_EN = 0 V or 6.5 V		–0.5		0.5	μA
t_on	Turnon time	C_L = 1 μF, R_L= 100 Ω, (see Figure 19)				3	ms
t_off	Turnoff time	C_L = 1 μF, R_L= 100 Ω, (see Figure 19)				3	ms
CURRENT-LIMIT
I_OS	Current-limit threshold (Maximum DC output current I_OUT delivered to load) and Short-circuit current, OUT connected to GND	R_ILIM = 15 kΩ	–40°C ≤T_A ≤105°C	1610	1700	1800	mA
		R_ILIM = 20 kΩ	T_A = 25°C	1215	1295	1375
		R_ILIM = 20 kΩ	–40°C ≤T_A ≤125°C	1200	1295	1375
		R_ILIM = 49.9 kΩ	T_A = 25°C	490	520	550
		R_ILIM = 49.9 kΩ	–40°C ≤T_A ≤125°C	475	520	565
		R_ILIM = 210 kΩ		100	130	150
		ILIM shorted to IN		50	75	100
t_IOS	Response time to short circuit	V_IN = 5 V (see Figure 20)			2		μs
REVERSE-VOLTAGE PROTECTION
	Reverse-voltage comparator trip point (V_OUT – V_IN)			95	135	190	mV
	Time from reverse-voltage condition to MOSFET turn off	V_IN = 5 V		3	5	7	ms
SUPPLY CURRENT
I_{IN_off}	Supply current, low-level output	V_IN = 6.5 V, No load on OUT, V_EN = 0 V			0.1	1	μA
I_{IN_on}	Supply current, high-level output	V_IN = 6.5 V, No load on OUT	R_ILIM = 20 kΩ		120	140	μA
I_{IN_on}	Supply current, high-level output	V_IN = 6.5 V, No load on OUT	R_ILIM = 210 kΩ		100	120	μA
I_REV	Reverse leakage current	V_OUT = 6.5 V, V_IN = 0 V	T_A = 25 °C		0.01	1	μA
UNDERVOLTAGE LOCKOUT
UVLO	Low-level input voltage, IN	V_IN rising			2.35	2.45	V
	Hysteresis, IN	T_A = 25 °C			25		mV
FAULT FLAG
V_OL	Output low voltage, FAULT	I_/FAULT = 1 mA				180	mV
	Off-state leakage	V_/FAULT = 6.5 V				1	μA
	FAULT deglitch	FAULT assertion or de-assertion due to overcurrent condition		5	8	11	ms
	FAULT deglitch	FAULT assertion or de-assertion due to reverse-voltage condition		2	4	6	ms
THERMAL SHUTDOWN
	Thermal shutdown threshold			155			°C
	Thermal shutdown threshold in current-limit			135			°C
	Hysteresis				10		°C

(1) Pulse-testing techniques maintain junction temperature close to ambient temperature; thermal effects must be taken into account separately.