ZHCSEK6A January 2015 – September 2018 TPL5010
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 器件比較表
- 6 Pin Configuration and Functions
- 7 Specifications
- 8 Detailed Description
- 9 Application and Implementation
- 10Power Supply Recommendations
- 11Layout
- 12器件和文檔支持
- 13機械、封裝和可訂購信息
封裝選項
機械數據 (封裝 | 引腳)
- DDC|6
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
6 Pin Configuration and Functions
DDC Package
6-Lead SOT-23
Top View
Pin Functions
| PIN | TYPE(1) | DESCRIPTION | APPLICATION INFORMATION | |
|---|---|---|---|---|
| NO. | NAME | |||
| 1 | VDD | P | Supply voltage | |
| 2 | GND | G | Ground | |
| 3 | DELAY/ M_RST | I | Time Interval set and Manual Reset | Resistance between this pin and GND is used to select the time interval. The reset switch is also connected to this pin. |
| 4 | DONE | I | Logic Input for watchdog functionality | Digital signal driven by the µC to indicate successful processing of the WAKE signal. |
| 5 | WAKE | O | Timer output signal generated every tIP period. | Digital pulsed signal to wake up the µC at the end of the programmed time interval. |
| 6 | RSTn | O | Reset Output (open drain output) | Digital signal to RESET the µC, pullup resistance is required |
(1) G= Ground, P= Power, O= Output, I= Input.