精品久久久久久无码人妻热黄鳝门,欧美一区二区三区无码大象视频 ,菠萝蜜视频网页版入口污

ZHCSRC5K september 2003 – april 2023 THS3091 , THS3095

PRODUCTION DATA

封裝選項

機械數據 (封裝 | 引腳)

D|8
- MSOI002K
DDA|8
- MPDS092F
DGN|8
- MPDS046G

散熱焊盤機械數據 (封裝 | 引腳)

DDA|8
- PPTD058J
DGN|8
- PPTD388A

訂購信息

7.6 Electrical Characteristics: V_S = ±5 V

at T_A ? 25°C, R_F = 1.15 kΩ, R_L = 100 Ω, and G = 2 (unless otherwise noted)

PARAMETER	TEST CONDITIONS		MIN	TYP	MAX	UNIT
AC PERFORMANCE
Small-signal bandwidth, –3 dB	G = 1, R_F = 1.78 kΩ, V_O = 200 mV_PP	DDA package		485		MHz
	G = 1, R_F = 1.78 kΩ, V_O = 200 mV_PP	DGN package		435
	G = 2, R_F = 1.15 kΩ, V_O = 200 mV_PP			215
	G = 5, R_F = 1 kΩ, V_O = 200 mV_PP			160
	G = 10, R_F = 866 Ω, V_O = 200 mV_PP			160
0.1-dB bandwidth flatness	V_O = 200 mV_PP			50		MHz
Large-signal bandwidth	V_O = 4 V_PP			205		MHz
Slew rate (10% to 90% level)	G = 2, V_O= 5-V step, R_F = 1.21 kΩ			1800		V/μs
Slew rate (10% to 90% level)	G = 5, V_O= 5-V step, R_F = 1.21 kΩ			1700		V/μs
Rise and fall time	G = 2, V_O = 5-V step, R_F = 1.21 kΩ			2		ns
Settling time	G = –2, V_O = 2-V_PP step	to 0.1%		12.5		ns
Settling time	G = –2, V_O = 2-V_PP step	to 0.01%		26		ns
HARMONIC DISTORTION
2nd harmonic distortion	V_O = 2 V_PP, f = 10 MHz	R_L = 100 Ω		74		dBc
2nd harmonic distortion	V_O = 2 V_PP, f = 10 MHz	R_L = 1 kΩ		76		dBc
3rd harmonic distortion	V_O = 2 V_PP, f = 10 MHz	R_L = 100 Ω		70		dBc
3rd harmonic distortion	V_O = 2 V_PP, f = 10 MHz	R_L = 1 kΩ		75		dBc
Input voltage noise	f > 10 kHz			1.1		nV/√Hz
Noninverting input current noise	f > 10 kHz			15		pA/√Hz
Inverting input current noise	f > 10 kHz			14		pA/√Hz
DC PERFORMANCE
Open-loop transimpedance	V_O = ±2.5 V, G = 1	T_A = 25°C	250	1500		kΩ
Open-loop transimpedance	V_O = ±2.5 V, G = 1	T_A= –40°C to +85°C	200			kΩ
Input offset voltage	V_CM = 0 V	T_A = 25°C		0.6	2	mV
Input offset voltage	V_CM = 0 V	T_A= –40°C to +85°C			3.5	mV
Noninverting input bias current	V_CM = 0 V	T_A = 25°C		2	15	μA
Noninverting input bias current	V_CM = 0 V	T_A= –40°C to +85°C			20	μA
Inverting input bias current	V_CM = 0 V	T_A = 25°C		5	15	μA
Inverting input bias current	V_CM = 0 V	T_A= –40°C to +85°C			25	μA
Input offset current	V_CM = 0 V	T_A = 25°C		1.5	10	μA
Input offset current	V_CM = 0 V	T_A= –40°C to +85°C			20	μA
Average offset voltage drift	V_CM = 0 V, T_A = –40°C to +85°C			±20		μV/°C
Average noninverting bias current drift	V_CM = 0 V, T_A = –40°C to +85°C			±20		nA/°C
Average inverting bias current drift	V_CM = 0 V, T_A = –40°C to +85°C			±95		nA/°C
Average offset current drift	V_CM = 0 V, T_A = –40°C to +85°C			±90		nA/°C
INPUT CHARACTERISTICS
Common-mode input range	T_A = 25°C		±3.3	±3.6		V
Common-mode input range	T_A= –40°C to +85°C		±3			V
Common-mode rejection ratio	V_CM = ±2.0 V, V_O = 0 V	T_A = 25°C	60	66		dB
Common-mode rejection ratio	V_CM = ±2.0 V, V_O = 0 V	T_A= –40°C to +85°C	57			dB
Noninverting input resistance				0.45		MΩ
Noninverting input capacitance				2.6		pF
Inverting input resistance				32		Ω
Inverting input capacitance				1.5		pF
OUTPUT CHARACTERISTICS
Output voltage swing	R_L = 1 kΩ	T_A = 25°C	±3.1	±3.4		V
Output voltage swing	R_L = 1 kΩ	T_A= –40°C to +85°C	±2.8
Output voltage swing	R_L = 100 Ω	T_A = 25°C	±2.7	±3.1
Output voltage swing	R_L = 100 Ω	T_A= –40°C to +85°C	±2.5
Output current	Sourcing, R_L = 10 Ω	T_A = 25°C	140	250		mA
	Sourcing, R_L = 10 Ω	T_A= –40°C to +85°C	120
	Sinking, R_L = 10 Ω	T_A = 25°C	–140	–250
	Sinking, R_L = 10 Ω	T_A= –40°C to +85°C	–120
Output impedance	f = 1 MHz, closed loop			0.09		Ω
POWER SUPPLY
Quiescent current	T_A = 25°C		7	8.2	9	mA
Quiescent current	T_A= –40°C to +85°C		6.5		9.5	mA
Power supply rejection	+PSRR	T_A = 25°C	68	81		dB
	+PSRR	T_A= –40°C to +85°C	63
	–PSRR	T_A = 25°C	65	79
	–PSRR	T_A= –40°C to +85°C	60
POWER-DOWN CHARACTERISTICS (THS3095 ONLY)
REF voltage range(1)			V_S–		V_S+– 4	V
Power-down voltage level⁽¹⁾	Enable			PD ≥ REF+2		V
Power-down voltage level⁽¹⁾	Disable			PD ≤ REF+0.8		V
Power-down quiescent current	PD = 0 V	T_A = 25°C		300	500	μA
Power-down quiescent current	PD = 0 V	T_A= –40°C to +85°C			600	μA
PD bias current	PD = 0 V, REF = 0 V,	T_A = 25°C		11	15	μA
	PD = 0 V, REF = 0 V,	T_A–40°C to +85°C			20
	PD = 3.3 V, REF = 0 V	T_A = 25°C		11	15
	PD = 3.3 V, REF = 0 V	T_A= –40°C to +85°C			20
Turn-on time delay	90% of final value			60		μs
Turn-off time delay	10% of final value			150		μs

(1) For detailed information on the behavior of the power-down circuit, see Section 8.3.1.

封裝選項

機械數據 (封裝 | 引腳)

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

7.6 Electrical Characteristics: VS = ±5 V

7.6 Electrical Characteristics: V_S = ±5 V