97国产精华最好的产品亚洲,久久久精品理论A级A片,久久精品女人天堂

SCLS115G December 1982 – September 2015 SN54HC164 , SN74HC164

PRODUCTION DATA.

封裝選項

請參考 PDF 數據表獲取器件具體的封裝圖。

機械數據 (封裝 | 引腳)

D|14
PW|14
N|14
NS|14

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

7 Specifications

7.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

			MIN	MAX	UNITS
V_CC	Supply voltage		−0.5	7	V
I_IK	Input clamp current⁽²⁾	V_I < 0 or V_I> V_CC		±20	mA
I_OK	Output clamp current⁽²⁾	V_O < 0 or V_O > V_CC		±20	mA
I_O	Continuous output current	V_O = 0 to V_CC		±25	mA
	Continuous current through V_CC or GND			±50	mA
T_stg	Storage temperature		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

7.2 ESD Ratings

			VALUE	UNIT
V_(ESD)	Electrostatic discharge	Human body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾	±2000	V
V_(ESD)	Electrostatic discharge	Charged-device model (CDM), per JEDEC specification JESD22-C101⁽²⁾	±1000	V

(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

			SN54HC164			SN74HC164			UNIT
			MIN	NOM	MAX	MIN	NOM	MAX	UNIT
V_CC	Supply voltage		2	5	6	2	5	6	V
V_IH	High-level input voltage	V_CC = 2 V	1.5			1.5			V
		V_CC = 4.5 V	3.15			3.15
		V_CC = 6 V	4.2			4.2
V_IL	Low-level input voltage	V_CC = 2 V			0.5			0.5	V
		V_CC = 4.5 V			1.35			1.35
		V_CC = 6 V			1.8			1.8
V_I	Input voltage		0		V_CC	0		V_CC	V
V_O	Output voltage		0		V_CC	0		V_CC	V
Δt/Δv⁽²⁾	Input transition rise and fall time	V_CC = 2 V			1000			1000	ns
		V_CC = 4.5 V			500			500
		V_CC = 6 V			400			400
T_A	Operating free-air temperature		–55		125	–40		125	°C

(1) All unused inputs of the device must be held at V_CC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, SCBA004.

(2) If this device is used in the threshold region (from V_IL max = 0.5 V to V_IH min = 1.5 V), there is a potential to go into the wrong state from induced grounding, causing double clocking. Operating with the inputs at t_t= 1000 ns and V_CC = 2 V does not damage the device; however, functionally, the CLK inputs are not ensured while in the shift, count, or toggle operating modes.

7.4 Thermal Information

THERMAL METRIC⁽¹⁾		SN54HC164			SN74HC164				UNIT
		J (CDIP)	W (CFP)	FK (LCCC)	D (SOIC)	N (PDIP)	NS (SO)	PW (TSSOP)
		14 PINS	14 PINS	20 PINS	14 PINS	14 PINS	14 PINS	14 PINS
R_θJA	Junction-to-ambient thermal resistance	—	—	—	86	80	76	113	°C/W

(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953.

7.5 Electrical Characteristics, T_A = 25°C

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER	TEST CONDITIONS		V_CC	MIN	TYP	MAX	UNIT
V_OH	V_I = V_IH or V_IL	I_OH = –20 μA	2 V	1.9	1.998		V
			4.5 V	4.4	4.499
			6 V	5.9	5.999
		I_OH = –4 mA	4.5 V	3.98	4.3
		I_OH = –5.2 mA	6 V	5.48	5.8
V_OL	V_I= V_IH or V_IL	I_OL = 20 μA	2 V		0.002	0.1	V
			4.5 V		0.001	0.1
			6 V		0.001	0.1
		I_OL = 4 mA	4.5 V		0.17	0.26
		I_OL = 5.2 mA	6 V		0.15	0.26
I_I	V_I= V_CC or 0		6 V		±0.1	±100	nA
I_CC	V_I= V_CC or 0	I_O= 0	6 V			8	µA
C_i			2 V to 6 V		3	10	pF

7.6 Electrical Characteristics, T_A = –55°C to 125°C

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER	TEST CONDITIONS		V_CC	SN54HC164			Recommended SN74HC164			UNIT
PARAMETER	TEST CONDITIONS		V_CC	MIN	TYP	MAX	MIN	TYP	MAX	UNIT
V_OH	V_I = V_IH or V_IL	I_OH = –20 μA	2 V	1.9			1.9			V
			4.5 V	4.4			4.4
			6 V	5.9			5.9
		I_OH = –4 mA	4.5 V	3.7			3.7
		I_OH = –5.2 mA	6 V	5.2			5.2
V_OL	V_I= V_IH or V_IL	I_OL = 20 μA	2 V			0.1			0.1	V
			4.5 V			0.1			0.1
			6 V			0.1			0.1
		I_OL = 4 mA	4.5 V			0.4			0.4
		I_OL = 5.2 mA	6 V			0.4			0.4
I_I	V_I= V_CC or 0		6 V			±1000			±1000	nA
I_CC	V_I= V_CC or 0	I_O= 0	6 V			160			160	µA
C_i			2 V to 6 V			10			10	pF

7.7 Electrical Characteristics, T_A = –55°C to 85°C

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER	TEST CONDITIONS		V_CC	SN74HC164			UNIT
PARAMETER	TEST CONDITIONS		V_CC	MIN	TYP	MAX	UNIT
V_OH	V_I = V_IH or V_IL	I_OH = –20 μA	2 V	1.9			V
			4.5 V	4.4
			6 V	5.9
		I_OH = –4 mA	4.5 V	3.84
		I_OH = –5.2 mA	6 V	5.34
V_OL	V_I= V_IH or V_IL	I_OL = 20 μA	2 V			0.1	V
			4.5 V			0.1
			6 V			0.1
		I_OL = 4 mA	4.5 V			0.33
		I_OL = 5.2 mA	6 V			0.33
I_I	V_I= V_CC or 0		6 V			±1000	nA
I_CC	V_I= V_CC or 0	I_O= 0	6 V			80	µA
C_i			2 V to 6 V			10	pF

7.8 Timing Requirements, T_A = 25°C

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER			V_CC	MIN	MAX	UNIT
f_clock	Clock frequency		2 V		6	MHz
			4.5 V		31
			6 V		36
t_w	Pulse duration	CLR low	2 V	100		ns
			4.5 V	20
			6 V	17
		CLK high or low	2 V	80
			4.5 V	16
			6 V	14
t_su	Setup time before CLK↑	Data	2 V	100		ns
			4.5 V	20
			6 V	17
		CLR inactive	2 V	100
			4.5 V	20
			6 V	17
t_h	Hold time, data after CLK↑		2 V	5		ns
			4.5 V	5
			6 V	5

7.9 Timing Requirements, T_A = –55°C to 125°C

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER			V_CC	SN54HC164			RECOMMENDED SN74HC164			UNIT
PARAMETER			V_CC	MIN	NOM	MAX	MIN	NOM	MAX	UNIT
f_clock	Clock frequency		2 V			4.2			4.2	MHz
			4.5 V			21			21
			6 V			25			25
t_w	Pulse duration	CLR low	2 V	150			125			ns
			4.5 V	30			25
			6 V	25			21
		CLK high or low	2 V	120			120
			4.5 V	24			24
			6 V	20			20
t_su	Setup time before CLK↑	Data	2 V	150			125			ns
			4.5 V	30			25
			6 V	25			25
		CLR inactive	2 V	150			125
			4.5 V	30			25
			6 V	25			25
t_h	Hold time, data after CLK↑		2 V	5			5			ns
			4.5 V	5			5
			6 V	5			5

7.10 Timing Requirements, T_A = –55°C to 85°C

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER			V_CC	SN74HC164			UNIT
PARAMETER			V_CC	MIN	NOM	MAX	UNIT
f_clock	Clock frequency		2 V			5	MHz
			4.5 V			25
			6 V			28
t_w	Pulse duration	CLR low	2 V	125			ns
			4.5 V	25
			6 V	21
		CLK high or low	2 V	100
			4.5 V	20
			6 V	18
t_su	Setup time before CLK↑	Data	2 V	125			ns
			4.5 V	25
			6 V	21
		CLR inactive	2 V	125
			4.5 V	25
			6 V	21
t_h	Hold time, data after CLK↑		2 V	5			ns
			4.5 V	5
			6 V	5

7.11 Switching Characteristics, T_A = 25°C

over recommended operating free-air temperature range, C_L = 50 pF (unless otherwise noted) (see Figure 3)

PARAMETER	FROM (INPUT)	TO (OUTPUT)	V_CC	MIN	TYP	MAX	UNIT
f_max			2 V	6	10		MHz
			4.5 V	31	54
			6 V	36	62
t_PHL	CLR	Any Q	2 V		140	205	ns
			4.5 V		28	41
			6 V		24	35
t_pd	CLK	Any Q	2 V		115	175
			4.5 V		23	35
			6 V		20	30
t_t			2 V		38	75	ns
			4.5 V		8	15
			6 V		6	13

7.12 Switching Characteristics, T_A = –55°C to 125°C

over recommended operating free-air temperature range, C_L = 50 pF (unless otherwise noted) (see Figure 3)

PARAMETER	FROM (INPUT)	TO (OUTPUT)	V_CC	SN54HC164			RECOMMENDED SN74HC164			UNIT
PARAMETER	FROM (INPUT)	TO (OUTPUT)	V_CC	MIN	TYP	MAX	MIN	TYP	MAX	UNIT
f_max			2 V	4.2			4.2			MHz
			4.5 V	21			21
			6 V	25			25
t_PHL	CLR	Any Q	2 V			295			255	ns
			4.5 V			59			51
			6 V			51			46
t_pd	CLK	Any Q	2 V			265			220
			4.5 V			53			44
			6 V			45			38
t_t			2 V			110			110	ns
			4.5 V			22			22
			6 V			19			19

7.13 Switching Characteristics, T_A = –55°C to 85°C

over recommended operating free-air temperature range, C_L = 50 pF (unless otherwise noted) (see Figure 3)

PARAMETER	FROM (INPUT)	TO (OUTPUT)	V_CC	SN74HC164			UNIT
PARAMETER	FROM (INPUT)	TO (OUTPUT)	V_CC	MIN	TYP	MAX	UNIT
f_max			2 V	5			MHz
			4.5 V	25
			6 V	28
t_PHL	CLR	Any Q	2 V			255	ns
			4.5 V			51
			6 V			46
t_pd	CLK	Any Q	2 V			220
			4.5 V			44
			6 V			38
t_t			2 V			95	ns
			4.5 V			19
			6 V			16

Figure 1. SN74HC164 Example Timing Diagram

Typical Characteristics

T_A = 25°C

Figure 2. Propagation Delay vs Supply Voltage at T_A = 25°C

封裝選項

機械數據 (封裝 | 引腳)

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

7 Specifications

7.1 Absolute Maximum Ratings

7.2 ESD Ratings

7.3 Recommended Operating Conditions

7.4 Thermal Information

7.5 Electrical Characteristics, TA = 25°C

7.6 Electrical Characteristics, TA = –55°C to 125°C

7.7 Electrical Characteristics, TA = –55°C to 85°C

7.8 Timing Requirements, TA = 25°C

7.9 Timing Requirements, TA = –55°C to 125°C

7.10 Timing Requirements, TA = –55°C to 85°C

7.11 Switching Characteristics, TA = 25°C

7.12 Switching Characteristics, TA = –55°C to 125°C

7.13 Switching Characteristics, TA = –55°C to 85°C

Typical Characteristics

7.5 Electrical Characteristics, T_A = 25°C

7.6 Electrical Characteristics, T_A = –55°C to 125°C

7.7 Electrical Characteristics, T_A = –55°C to 85°C

7.8 Timing Requirements, T_A = 25°C

7.9 Timing Requirements, T_A = –55°C to 125°C

7.10 Timing Requirements, T_A = –55°C to 85°C

7.11 Switching Characteristics, T_A = 25°C

7.12 Switching Characteristics, T_A = –55°C to 125°C

7.13 Switching Characteristics, T_A = –55°C to 85°C