ZHCSSH8P October 1995 – February 2024 SN54AHC14 , SN74AHC14
PRODUCTION DATA
- 1
- 1 特性
- 2 應用
- 3 說明
- 4 Pin Configuration and Functions
- 5 Specifications
- 6 Parameter Measurement Information
- 7 Detailed Description
- 8 Application and Implementation
- 9 Device and Documentation Support
- 10Revision History
- 11Mechanical, Packaging, and Orderable Information
封裝選項
請參考 PDF 數據表獲取器件具體的封裝圖。
機械數據 (封裝 | 引腳)
- D|14
- RGY|14
- DGV|14
- PW|14
- DB|14
- BQA|14
- N|14
- NS|14
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
6 Parameter Measurement Information
Figure 6-1 Load
Circuit ForTotem-Pole Outputs
Figure 6-2 Load
Circuit For3-State and Open-Drain Outputs
Table 6-1 Measurement Information
| TEST | S1 |
|---|---|
| tPLH, tPHL | Open |
| tPLZ, tPZL | VCC |
| tPHZ, tPZH | GND |
| Open drain | VCC |
Figure 6-3 Voltage WaveformsPulse Duration
Figure 6-5 Voltage Waveforms Propagation Delay Times Inverting
and Noninverting Outputs
Figure 6-4 Voltage WaveformsSetup and Hold Times
A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal
conditions such that the output is low except when disabled by the output
control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having
the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr
≤ 3 ns,
tf ≤ 3 ns.
tf ≤ 3 ns.
D. The outputs are measured one at a time with one
input transition per measurement.
E. All parameters and waveforms are not applicable to
all devices.
Figure 6-6 Voltage Waveforms Enable and Disable Times Low- and
High-Level Enabling