ZHCS601D December 2011 – May 2015 SN65HVD255 , SN65HVD256 , SN65HVD257
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 Device Options
- 6 Pin Configuration and Functions
- 7 Specifications
- 8 Parameter Measurement Information
- 9 Detailed Description
- 10Application and Implementation
- 11Power Supply Recommendations
- 12Layout
- 13器件和文檔支持
- 14機械、封裝和可訂購信息
封裝選項
機械數據 (封裝 | 引腳)
- D|8
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
7 Specifications
7.1 Absolute Maximum Ratings(1)(2)
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| VCC | Supply voltage | –0.3 | 6.1 | V | |
| VRXD | RXD Output supply voltage | SN65HVD256 | –0.3 | 6 and VRXD ≤ VCC + 0.3 | V |
| VBUS | CAN Bus I/O voltage (CANH, CANL) | –27 | 40 | V | |
| VLogic_Input | Logic input pin voltage (TXD, S) | –0.3 | 6 | V | |
| VLogic_Output | Logic output pin voltage (RXD) | SN65HVD255, SN65HVD257 | –0.3 | 6 | V |
| VLogic_Output | Logic output pin voltage (RXD) | SN65HVD256 | –0.3 | 6 and VI ≤ VRXD + 0.3 | V |
| IO(RXD) | RXD (Receiver) output current | 12 | mA | ||
| IO(FAULT) | FAULT output current | SN65HVD257 | 20 | mA | |
| TJ | Operating virtual junction temperature (see Power Dissipation) | –40 | 150 | °C | |
| TA | Ambient temperature (see Power Dissipation) | –40 | 125 | °C | |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential I/O bus voltages, are with respect to ground terminal.
7.2 ESD Ratings
| VALUE | UNIT | |||||
|---|---|---|---|---|---|---|
| V(ESD) | Electrostatic discharge | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) | All pins | ±2500 | V | |
| CAN bus pins (CANH, CANL)(2) | ±12000 | |||||
| Charged-device model (CDM), per JEDEC specification JESD22-C101(3) | All pins | ±750 | ||||
| Machine model | All pins | ±250 | ||||
| IEC 61400-4-2 according to GIFT-ICT CAN EMC test spec(4) | CAN bus pins (CANH, CANL) to GND | ±8000 | ||||
| ISO7637 Transients according to GIFT - ICT CAN EMC test spec(5) | CAN bus pins (CANH, CANL) | Pulse 1 | –100 | |||
| Pulse 2 | +75 | |||||
| Pulse 3a | –150 | |||||
| Pulse 3b | +100 | |||||
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) Test method based upon JEDEC Standard 22 Test Method A114, CAN bus pins stressed with respect to GND.
(3) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
(4) IEC 61000-4-2 is a system level ESD test. Results given here are specific to the GIFT-ICT CAN EMC Test specification conditions. Different system level configurations may lead to different results.
(5) ISO7637 is a system level transient test. Results given here are specific to the GIFT-ICT CAN EMC Test specification conditions. Different system level configurations may lead to different results.
7.3 Recommended Operating Conditions
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| VCC | Supply voltage | 4.5 | 5.5 | V | |
| VRXD | RXD supply (SN65HVD256 only) | 2.8 | 5.5 | ||
| VI or VIC | CAN bus terminal voltage (separately or common mode) | –2 | 7 | ||
| VID | CAN bus differential voltage | -6 | 6 | ||
| VIH | Logic HIGH level input (TXD, S) | 2 | 5.5 | ||
| VIL | Logic LOW level input (TXD, S) | 0 | 0.8 | ||
| IOH(DRVR) | CAN BUS Driver High level output current | –70 | mA | ||
| IOL(DRVR) | CAN BUS Driver Low level output current | 70 | |||
| IOH(RXD) | RXD pin HIGH level output current | –2 | |||
| IOL(RXD) | RXD pin LOW level output current | 2 | |||
| IO(FAULT) | FAULT pin LOW level output current | SN65HVD257 | 2 | ||
| TA | Operational free-air temperature (see Power Dissipation) | –40 | 125 | °C | |
7.4 Thermal Information
| THERMAL METRIC(1) | SN65HVD25x | UNIT | |
|---|---|---|---|
| D (SOIC) | |||
| 8 PINS | |||
| RθJA | Junction-to-ambient thermal resistance, High-K thermal resistance(2) | 107.5 | °C/W |
| RθJC(top) | Junction-to-case (top) thermal resistance | 56.7 | °C/W |
| RθJB | Junction-to-board thermal resistance | 48.9 | °C/W |
| ψJT | Junction-to-top characterization parameter | 12.1 | °C/W |
| ψJB | Junction-to-board characterization parameter | 48.2 | °C/W |
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
(2) The junction-to-ambient thermal resistance under natural convection is obtained in a simulation on a JEDEC-standard, High-K board, as specified in JESD51-7, in an environment described in JESD51-2a.
7.5 Electrical Characteristics
Over recommended operating conditions, TA = –40°C to 125°C (unless otherwise noted). SN65HVD256 device VRXD = VCC.| PARAMETER | TEST CONDITIONS | MIN | TYP(1) | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|
| SUPPLY CHARACTERISTICS | |||||||
| ICC | 5-V Supply current | Normal Mode (Driving Dominant) | See Figure 6, TXD = 0 V, RL = 50 Ω, CL = open, RCM = open, S = 0 V |
60 | 85 | mA | |
| Normal Mode (Driving Dominant – bus fault) | See Figure 6, TXD = 0 V, S = 0 V, CANH = –12 V, RL = open, CL = open, RCM = open |
130 | 180 | ||||
| Normal Mode (Driving Dominant) | See Figure 6, TXD = 0 V, RL = open (no load), CL = open, RCM = open, S = 0 V |
10 | 20 | ||||
| Normal Mode (Recessive) | See Figure 6, TXD = VCC, RL = 50 Ω, CL = open, RCM = open, S = 0 V |
10 | 20 | ||||
| Silent Mode | See Figure 6, TXD = VCC, RL = 50 Ω, CL = open, RCM = open, S = VCC |
2.5 | 5 | ||||
| IRXD | RXD Supply current (SN65HVD256 only) | All modes | RXD Floating, TXD = 0 V | 500 | µA | ||
| UVVCC | Undervoltage detection on VCC for protected mode | 3.5 | 4.45 | V | |||
| VHYS(UVVCC) | Hysteresis voltage on UVVCC | 200 | mV | ||||
| UVRXD | Undervoltage detection on VRXD for protected mode (SN65HVD256 only) | 1.3 | 2.75 | V | |||
| VHYS(UVRXD) | Hysteresis voltage on UVRXD (SN65HVD256 only) | 80 | mV | ||||
| S PIN (MODE SELECT INPUT) | |||||||
| VIH | HIGH-level input voltage | 2 | V | ||||
| VIL | LOW-level input voltage | 0.8 | V | ||||
| IIH | HIGH-level input leakage current | S = VCC = 5.5 V | 7 | 100 | µA | ||
| IIL | Low-level input leakage current | S = 0 V, VCC = 5.5 V | –1 | 0 | 1 | µA | |
| ILKG(OFF) | Unpowered leakage current | S = 5.5 V, VCC = 0 V, VRXD = 0 V | 7 | 35 | 100 | µA | |
| TXD PIN (CAN TRANSMIT DATA INPUT) | |||||||
| VIH | HIGH level input voltage | 2 | V | ||||
| VIL | LOW level input voltage | 0.8 | V | ||||
| IIH | HIGH level input leakage current | TXD = VCC = 5.5 V | –2.5 | 0 | 1 | µA | |
| IIL | Low level input leakage current | TXD = 0 V, VCC = 5.5 V | –100 | –25 | –7 | µA | |
| ILKG(OFF) | Unpowered leakage current | TXD = 5.5 V, VCC = 0 V, VRXD = 0 V | –1 | 0 | 1 | µA | |
| CI | Input Capacitance | 3.5 | pF | ||||
| RXD PIN (CAN RECEIVE DATA OUTPUT) | |||||||
| VOH | HIGH level output voltage | See Figure 7, IO = –2 mA. For devices with VRXD supply VOH = 0.8 × VRXD | 0.8 × VCC | V | |||
| VOL | LOW level output voltage | See Figure 7, IO = 2 mA | 0.4 | V | |||
| ILKG(OFF) | Unpowered leakage current | RXD = 5.5 V, VCC = 0 V, VRXD = 0 V | –1 | 0 | 1 | µA | |
| DRIVER ELECTRICAL CHARACTERISTICS | |||||||
| VO(D) | Bus output voltage (dominant) | CANH | See Figure 15 and Figure 6, TXD = 0 V, S = 0 V, RL = 60 Ω, CL = open, RCM = open |
2.75 | 4.5 | V | |
| CANL | 0.5 | 2.25 | |||||
| VO(R) | Bus output voltage (recessive) | See Figure 15 and Figure 6, TXD = VCC, VRXD = VCC, S = VCC or 0 V (2), RL = open (no load), RCM = open | 2 | 0.5 × VCC | 3 | V | |
| VOD(D) | Differential output voltage (dominant) | See Figure 15 and Figure 6, TXD = 0 V, S = 0 V, 45 Ω ≤ RL ≤ 65 Ω, CL = open, RCM = 330 Ω, –2 V ≤ VCM ≤ 7 V, 4.75 V≤ VCC ≤ 5.25 V |
1.5 | 3 | V | ||
| See Figure 15 and Figure 6, TXD = 0 V, S = 0 V, 45 Ω ≤ RL ≤ 65 Ω, CL = open, RCM = 330 Ω, –2 V ≤ VCM ≤ 7 V, 4.5 V ≤ VCC ≤ 5.5 V |
1.25 | 3.2 | |||||
| VOD(R) | Differential output voltage (recessive) | See Figure 15 and Figure 6, TXD = VCC, S = 0 V, RL = 60 Ω, CL = open, RCM = open |
–0.12 | 0.012 | V | ||
| See Figure 15 and Figure 6, TXD = VCC, S = 0 V, RL = open (no load), CL = open, RCM = open, –40°C ≤ TA ≤ 85°C |
–0.100 | 0.050 | |||||
| VSYM | Output symmetry (dominant or recessive) (VCC – VO(CANH) – VO(CANL)) |
See Figure 15 and Figure 6, S at 0 V, RL = 60 Ω, CL = open, RCM = open |
–0.4 | 0.4 | V | ||
| IOS(SS)_DOM | Short circuit steady-state output current, Dominant | See Figure 15 and Figure 11, VCANH = 0 V, CANL = open, TXD = 0 V | –160 | mA | |||
| See Figure 15 and Figure 11, VCANL = 32 V, CANH = open, TXD = 0 V |
160 | ||||||
| IOS(SS)_REC | Short circuit steady-state output current, Recessive | See Figure 15 and Figure 11, –20 V ≤ VBUS ≤ 32 V, Where VBUS = CANH = CANL, TXD = VCC, Normal and Silent Modes |
–8 | 8 | mA | ||
| CO | Output capacitance | See Input capacitance to ground (CI) in the following Receiver Electrical Characteristics section of this table | |||||
| RECEIVER ELECTRICAL CHARACTERISTICS | |||||||
| VIT+ | Positive-going input threshold voltage, normal mode | See Figure 7, Table 5 and Table 1 | 900 | mV | |||
| VIT– | Negative-going input threshold voltage, normal mode | 500 | mV | ||||
| VHYS | Hysteresis voltage (VIT+ - VIT–) | 125 | mV | ||||
| IIOFF(LKG) | Power-off (unpowered) bus input leakage current | VCANH = VCANL = 5 V, VCC = 0 V, VRXD = 0 V |
5.5 | µA | |||
| CI | Input capacitance to ground (CANH or CANL) | TXD = VCC, VRXD = VCC, VI = 0.4 sin (4E6 π t) + 2.5 V |
25 | pF | |||
| CID | Differential input capacitance | TXD = VCC, VRXD = VCC, VI = 0.4 sin (4E6 π t) |
10 | pF | |||
| RID | Differential input resistance | TXD = VCC = VRXD = 5 V, S = 0 V | 30 | 80 | kΩ | ||
| RIN | Input resistance (CANH or CANL) | 15 | 40 | kΩ | |||
| RIN(M) | Input resistance matching: [1 – RIN(CANH) / RIN(CANL)] × 100% |
V(CANH) = V(CANL), –40°C ≤ TA ≤ 85°C | –3% | 3% | |||
| FAULT PIN (FAULT OUTPUT), SN65HVD257 ONLY | |||||||
| ICH | Output current high level | FAULT = VCC, see Figure 5 | –10 | 10 | µA | ||
| ICL | Output current low level | FAULT = 0.4 V, see Figure 5 | 5 | 12 | mA | ||
(1) All typical values are at 25°C and supply voltages of VCC = 5 V and VRXD = 5 V, RL = 60 Ω.
(2) For the bus output voltage (recessive) will be the same if the device is in normal mode with S pin LOW or if the device is in silent mode with the S pin HIGH.
7.6 Power Dissipation
| THERMAL METRIC | TEST CONDITIONS | TYP | UNIT | |
|---|---|---|---|---|
| PD | Average power dissipation | VCC = 5 V, VRXD = 5 V, TJ = 27°C, RL = 60 Ω, S at 0 V, Input to TXD at 250 kHz, 25% duty cycle square wave, CL_RXD = 15 pF. Typical CAN operating conditions at 500 kbps with 25% transmission (dominant) rate. | 115 | mW |
| VCC = 5.5 V, VRXD = 5.5 V, TJ = 150°C, RL = 50 Ω, S at 0 V, Input to TXD at 500 kHz, 50% duty cycle square wave, CL_RXD = 15 pF. Typical high load CAN operating conditions at 1 Mbps with 50% transmission (dominant) rate and loaded network. | 268 | |||
| Thermal shutdown temperature | 170 | °C | ||
| Thermal shutdown hysteresis | 5 | °C | ||
7.7 Switching Characteristics
over operating free-air temperature range (unless otherwise noted)| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| DEVICE SWITCHING CHARACTERISTICS | ||||||
| tPROP(LOOP1) | Total loop delay, driver input (TXD) to receiver output (RXD), recessive to dominant | See Figure 9, S = 0 V, RL = 60 Ω, CL = 100 pF, CL_RXD = 15 pF |
150 | ns | ||
| tPROP(LOOP2) | Total loop delay, driver input (TXD) to receiver output (RXD), dominant to recessive | 150 | ||||
| IMODE | Mode change time, from Normal to Silent or from Silent to Normal | See Figure 8 | 20 | µS | ||
| DRIVER SWITCHING CHARACTERISTICS | ||||||
| tpHR | Propagation delay time, HIGH TXD to Driver Recessive | See Figure 6, S = 0 V, RL = 60 Ω, CL = 100 pF, RCM = open |
50 | 70 | ns | |
| tpLD | Propagation delay time, LOW TXD to Driver Dominant | 40 | 70 | |||
| tsk(p) | Pulse skew (|tpHR – tpLD|) | 10 | ||||
| tR | Differential output signal rise time | 10 | 30 | |||
| tF | Differential output signal fall time | 17 | 30 | |||
| tR(10k) | Differential output signal rise time, RL = 10 kΩ |
See Figure 6, S = 0 V, RL = 10 kΩ, CL = 10 pF, RCM = open |
35 | ns | ||
| tF(10k) | Differential output signal fall time, RL = 10 kΩ |
100 | ||||
| tTXD_DTO | Dominant timeout(1) | See Figure 10, RL = 60 Ω, CL = open | 1175 | 3700 | µs | |
| RECEIVER SWITCHING CHARACTERISTICS | ||||||
| tpRH | Propagation delay time, recessive input to high output | See Figure 7, CL_RXD = 15 pF | 70 | 90 | ns | |
| tpDL | Propagation delay time, dominant input to low output | 70 | 90 | ns | ||
| tR | Output signal rise time | 4 | 20 | ns | ||
| tF | Output signal fall time | 4 | 20 | ns | ||
| tRXD_DTO(2) | Receiver dominant time out (SN65HVD257 only) See Figure 4, CL_RXD = 15 pF | 1380 | 4200 | µs | ||
(1) The TXD dominant timeout (tTXD_DTO) disables the driver of the transceiver when the TXD has been dominant longer than tTXD_DTO, which releases the bus lines to recessive, thus preventing a local failure from locking the bus dominant. The driver may only transmit dominant again after TXD has been returned HIGH (recessive). While this protects the bus from local faults locking the bus dominant, it limits the minimum data rate possible. The CAN protocol allows a maximum of eleven successive dominant bits (on TXD) for the worst case, where five successive dominant bits are followed immediately by an error frame. This, along with the tTXD_DTO minimum, limits the minimum bit rate. The minimum bit rate may be calculated by: Minimum Bit Rate = 11 / tTXD_DTO = 11 bits / 1175 µs = 9.4 kbps.
(2) The RXD timeout (tRXD_DTO) disables the RXD output in the case that the bus has been dominant longer than tRXD_DTO, which releases RXD pin to the recessive state (high), thus preventing a dominant bus failure from permanently keeping the RXD pin low. The RXD pin will automatically resume normal operation once the bus has been returned to a recessive state. While this protects the protocol controller from a permanent dominant state, it limits the minimum data rate possible. The CAN protocol allows a maximum of eleven successive dominant bits (on RXD) for the worst case, where five successive dominant bits are followed immediately by an error frame. This, along with the tRXD_DTO minimum, limits the minimum bit rate. The minimum bit rate may be calculated by: Minimum Bit Rate = 11 / tRXD_DTO = 11 bits / 1380 µs = 8 kbps.
7.8 Typical Characteristics
Figure 1. Differential Output Voltage vs Supply Voltage
Figure 3. Typical Transceiver Loop Delay vs Bus Loading
Figure 2. Differential Output Voltage vs Ambient Temperature