国产成人午夜精品免费视频,日日夜夜免费精品视频,久久免费黄色一级视频

ZHCSLE3 June 2023 OPT4060

PRODUCTION DATA

封裝選項

機械數(shù)據(jù) (封裝 | 引腳)

DTS|8
- MPSS136D

散熱焊盤機械數(shù)據(jù) (封裝 | 引腳)

訂購信息

zhcsle3_oa

7.5 Electrical Characteristics

All specifications at T_A = 25°C, V_DD = 3.3 V, 800-ms conversion-time per channel (CONVERSION_TIME=0xB), automatic full-scale range (RANGE = 0xC), white LED and normal-angle incidence of light, unless otherwise specified.

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
Optical
	Number of Channels			4
?_peak	Peak irradiance spectral responsivity	CH0 (R)		605		nm
		CH1(G)		555		nm
		CH2(B)		450		nm
		CH3(W)		500		nm
	ADC resolution		9		20	bits
	Range determination			3		bits
T_intg	Light Integration-time per channel ⁽⁴⁾	Conversion-time CT = 0x6		25		ms
T_intg	Light Integration-time per channel ⁽⁴⁾	Conversion-time CT = 0xB		800		ms
R_CH0	Peak Responsivity	CH0 (R) Lowest auto gain range, 800ms conversion time per channel		1950		codes per μW/cm²
R_CH1		CH1 (G) Lowest auto gain range, 800ms conversion time per channel		3100		codes per μW/cm²
R_CH2		CH2 (B) Lowest auto gain range, 800ms conversion time per channel		1990		codes per μW/cm²
R_CH3		CH3 (W) Lowest auto gain range, 800ms conversion time per channel		5640		codes per μW/cm²
ER_lux	Equivalent Resolution	Lowest auto gain range, 100ms conversion-time per channel		17.2		mlux
ER_lux	Equivalent Resolution	Lowest auto gain range, 800ms conversion-time per channel		2.15		mlux
E_vFS	Full-scale equivalent Illuminance			144284		lux
E_v	Measurement output result from lux measurement	2000 lux input⁽¹⁾	1800	2000	2200	lux
	Relative accuracy between gain ranges ⁽²⁾	All channels		0.6		%
E_vIR	Infrared response⁽⁶⁾	850nm near infra-red, all channels except for CH3 (W)		0.2		%
	Light source variation for lux measurement (incandescent, halogen, fluorescent)	Bare device, no cover glass		4		%
	Linearity	Input illuminance > 2254 lux , 100ms conversion-time per channel, all channels		2		%
	Linearity	Input illuminance <= 2254lux , 100ms conversion-time per channel, all channels		5		%
	Dark Measurement	All channels		0	10	codes
	Drift across temperature	CH0 (R)		0.02		%/°C
		CH1 (G)		0.02		%/°C
		CH2 (B)		0.05		%/°C
		CH3 (W)		0.05		%/°C
	Angular response (FWHM)	CH0 (R)		134		°
		CH1 (G)		121		°
		CH2 (B)		99		°
		CH3 (W)		128		°
PSRR	Power-supply rejection ratio⁽³⁾	VDD at 3.6 V and 1.6 V, 30 different sources, all channels		0.2		%/V
POWER SUPPLY
V_DD	Power supply		1.6		3.6	V
V_I2C	Power supply for I²C pull up resistor	I²C pullup resistor, V_DD ≤ _VI2C	1.6		5.5	V
I_QACTIVE	Active Current	Dark		24		μA
I_QACTIVE	Active Current	Full-scale lux		29		μA
I_Q	Quiescent current	Dark		2		μA
I_Q	Quiescent current	Full-scale lux		2.6		μA
POR	Power-on-reset threshold			0.8		V
DIGITAL
C_IO	I/O Pin Capacitance			3		pF
V_IL	Low-level input voltage (SDA, SCL, and ADDR)		0		0.3 X V_DD	V
V_IH	High-level input voltage (SDA, SCL, and ADDR)		0.7 X V_DD		5.5	V
I_IL	Low-level input current (SDA, SCL, and ADDR)			0.01	0.25⁽⁵⁾	μA
V_OL	Low-level output voltage (SDA and INT)	I_OL=3mA			0.32	V
I_ZH	Output logic high, high-Z leakage current (SDA, INT)	Measured with V_DD at pin		0.01	0.25⁽⁵⁾	μA
TEMPERATURE
	Specified temperature range		–40		85	°C

(1) Tested with the white LED calibrated to 2000 lux

(2) Characterized by measuring fixed near-full-scale light levels on the higher adjacent full-scale range setting.

(3) PSRR is the percent change of the measured lux output from its current value, divided by the change in power supply voltage, as characterized by results from 3.6-V and 1.6-V power supplies

(4) The conversion-time, from start of conversion until the data are ready to be read, is the integration-time plus analog-to-digital conversion-time.

(5) The specified leakage current is dominated by the production test equipment limitations. Typical values are much smaller

(6) Tested with a near infrared LED of 850nm wavelength