精品国产h一区二区三区不卡,特黄做受又粗又大又硬老头,内射少妇36P九色

ZHCSH68G November 2017 – November 2024 UCC21220 , UCC21220A

PRODUCTION DATA

封裝選項

請參考 PDF 數據表獲取器件具體的封裝圖。

機械數據 (封裝 | 引腳)

D|16

散熱焊盤機械數據 (封裝 | 引腳)

訂購信息

6.8 Electrical Characteristics

V_VCCI = 3.3 V or 5.0 V, 0.1-μF capacitor from VCCI to GND and 1uF capacitor from VDDA/B to VSSA/B, V_VDDA = V_VDDB = 12 V, 1-μF capacitor from VDDA and VDDB to VSSA and VSSB, T_A = –40°C to +125°C, unless otherwise noted⁽¹⁾⁽²⁾.

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
SUPPLY CURRENTS
I_VCCI	VCCI quiescent current	V_INA = 0 V, V_INB = 0 V		1.4	2.0	mA
I_VDDA, I_VDDB	VDDA and VDDB quiescent current	V_INA = 0 V, V_INB = 0 V		1.2	2.0	mA
I_VCCI	VCCI operating current	(f = 500 kHz) current per channel		2.7	3.2	mA
I_VDDA, I_VDDB	VDDA and VDDB operating current	(f = 500 kHz) current per channel, V_VDDA, V_VDDB = 12 V		2.7	4.4	mA
VCC SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDS
V_{VCCI_ON}	UVLO Rising threshold		2.55	2.7	2.85	V
V_{VCCI_OFF}	UVLO Falling threshold		2.35	2.5	2.65	V
V_{VCCI_HYS}	UVLO Threshold hysteresis			0.2		V
UCC21220A VDD SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDS (5-V UVLO Version)
V_{VDDA_ON}, V_{VDDB_ON}	UVLO Rising threshold		5.7	6.0	6.3	V
V_{VDDA_OFF}, V_{VDDB_OFF}	UVLO Falling threshold		5.4	5.7	6.0	V
V_{VDDA_HYS}, V_{VDDB_HYS}	UVLO Threshold hysteresis			0.3		V
UCC21220 VDD SUPPLY VOLTAGE UNDERVOLTAGE THRESHOLDS (8-V UVLO Version)
V_{VDDA_ON}, V_{VDDB_ON}	UVLO Rising threshold		7.7	8.5	8.9	V
V_{VDDA_OFF}, V_{VDDB_OFF}	UVLO Falling threshold		7.2	7.9	8.4	V
V_{VDDA_HYS}, V_{VDDB_HYS}	UVLO Threshold hysteresis			0.6		V
INA, INB AND DISABLE
V_INAH, V_INBH, V_DISH	Input high threshold voltage			2	2.3	V
V_INAL, V_INBL, V_DISL	Input low threshold voltage		0.8	1		V
V_{INA_HYS}, V_{INB_HYS}, V_{DIS_HYS}	Input threshold hysteresis			1		V
OUTPUT
I_OA+, I_OB+	Peak output source current	C_VDD = 10 μF, C_LOAD = 0.22 μF, f = 1 kHz, bench measurement		-4		A
I_OA-, I_OB-	Peak output sink current	C_VDD = 10 μF, C_LOAD = 0.22 μF, f = 1 kHz, bench measurement		6		A
R_OHA, R_OHB	Output resistance at high state	I_OUT = –5 mA, R_OHA, R_OHB do not represent drive pull-up performance. See t_RISE in Section 6.9 and Section 8.3.4 for more details.		5		Ω
R_OLA, R_OLB	Output resistance at low state	I_OUT = 5 mA		0.55		Ω
V_OAPDA, V_OAPDB	Driver output (V_OUTA, V_OUTB) active pull down	V_VDDA and V_VDDB unpowered, I_OUTA, I_OUTB = 200 mA		1.6	2	V

(1) Current direction in the testing conditions are defined to be positive into the pin and negative out of the specified terminal (unless otherwise noted).

(2) Parameters that has only typical values, are not production tested and guaranteed by design.