ZHCSEV2C January 2016 – September 2016 MUX508 , MUX509
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 Device Comparison Table
- 6 Pin Configuration and Functions
- 7 Specifications
- 8 Parameter Measurement Information
- 9 Detailed Description
- 10Applications and Implementation
- 11Power-Supply Recommendations
- 12Layout
- 13器件和文檔支持
- 14機械、封裝和可訂購信息
封裝選項
機械數據 (封裝 | 引腳)
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
7 Specifications
7.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| Supply voltage | VDD | –0.3 | 40 | V | |
| VSS | –40 | 0.3 | |||
| VDD – VSS | 40 | ||||
| Digital input pins(2) | EN, A0, A1, A2 pins | Voltage | VSS – 0.3 | VDD + 0.3 | V |
| Current | –30 | 30 | mA | ||
| Analog input pins(2) | Sx, SxA, SxB pins | Voltage | VSS – 2 | VDD + 2 | V |
| Current | –30 | 30 | mA | ||
| Analog output pins(2) | D, DA, DB pins | Voltage | VSS – 2 | VDD + 2 | V |
| Current | –30 | 30 | mA | ||
| Temperature | Operating, TA | –55 | 150 | °C | |
| Junction, TJ | 150 | ||||
| Storage, Tstg | –65 | 150 | |||
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Only one pin at a time
7.2 ESD Ratings
| VALUE | UNIT | |||
|---|---|---|---|---|
| V(ESD) | Electrostatic discharge | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) | 2000 | V |
| Charged-device model (CDM), per JEDEC specification JESD22-C101(2) | 500 | |||
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
7.3 Recommended Operating Conditions
| MIN | NOM | MAX | UNIT | |||
|---|---|---|---|---|---|---|
| VDD(1) | Positive power-supply voltage | Dual supply | 5 | 18 | V | |
| Single supply | 10 | 36 | ||||
| VSS(2) | Negative power-supply voltage (dual supply) | –5 | –18 | V | ||
| VDD – VSS | Supply voltage | 10 | 36 | V | ||
| VS | Source pins voltage(3) | VSS | VDD | V | ||
| VD | Drain pins voltage | VSS | VDD | V | ||
| VEN | Enable pin voltage | VSS | VDD | V | ||
| VA | Address pins voltage | VSS | VDD | V | ||
| ICH | Channel current (TA = 25°C) | –25 | 25 | mA | ||
| TA | Operating temperature | –40 | 125 | °C | ||
(1) When VSS = 0 V, VDD can range from 10 V to 36 V.
(2) VDD and VSS can be any value as long as 10 V ≤ (VDD – VSS) ≤ 36 V, and VDD ≥ 5 V.
(3) VS is the voltage on all the S pins.
7.4 Thermal Information
| THERMAL METRIC(1) | MUX50x | UNIT | ||
|---|---|---|---|---|
| PW (TSSOP) | D (SOIC) | |||
| 16 PINS | 16 PINS | |||
| RθJA | Junction-to-ambient thermal resistance | 103.8 | 78.3 | °C/W |
| RθJC(top) | Junction-to-case (top) thermal resistance | 36.8 | 37.2 | °C/W |
| RθJB | Junction-to-board thermal resistance | 49.8 | 35.7 | °C/W |
| ψJT | Junction-to-top characterization parameter | 2.7 | 8.2 | °C/W |
| ψJB | Junction-to-board characterization parameter | 49.1 | 35.4 | °C/W |
| RθJC(bot) | Junction-to-case (bottom) thermal resistance | n/a | n/a | °C/W |
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics.
7.5 Electrical Characteristics: Dual Supply
at TA = 25°C, VDD = 15 V, and VSS = –15 V (unless otherwise noted)| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|
| ANALOG SWITCH | |||||||
| Analog signal range | TA = –40°C to +125°C | VSS | VDD | V | |||
| RON | On-resistance | VS = 0 V, ICH = 1 mA | 125 | 170 | Ω | ||
| VS = ±10 V, ICH = 1 mA | 145 | 200 | |||||
| TA = –40°C to +85°C | 230 | ||||||
| TA = –40°C to +125°C | 250 | ||||||
| ΔRON | On-resistance mismatch between channels | VS = ±10 V, ICH = 1 mA | 2.4 | 6 | Ω | ||
| TA = –40°C to +85°C | 9 | ||||||
| TA = –40°C to +125°C | 11 | ||||||
| RFLAT | On-resistance flatness | VS = 10 V, 0 V, –10 V | 22 | 45 | Ω | ||
| TA = –40°C to +85°C | 53 | ||||||
| TA = –40°C to +125°C | 58 | ||||||
| On-resistance drift | VS = 0 V | 0.52 | %/°C | ||||
| IS(OFF) | Input leakage current | Switch state is off, VS = ±10 V, VD = ±10 V(2) |
–1 | 0.01 | 1 | nA | |
| TA = –40°C to +85°C | –10 | 10 | |||||
| TA = –40°C to +125°C | –25 | 25 | |||||
| ID(OFF) | Output off leakage current | Switch state is off, VS = ±10 V, VD = ±10 V(2) |
–1 | 0.01 | 1 | nA | |
| TA = -40°C to +85°C | –10 | 10 | |||||
| TA = -40°C to +125°C | –50 | 50 | |||||
| ID(ON) | Output on leakage current | Switch state is on, VD = ±10 V, VS = floating |
–1 | 0.01 | 1 | nA | |
| TA = –40°C to +85°C | –10 | 10 | |||||
| TA = –40°C to +125°C | –50 | 50 | |||||
| LOGIC INPUT | |||||||
| VIH | High-level input voltage | 2.0 | V | ||||
| VIL | Low-level input voltage | 0.8 | V | ||||
| ID | Input current | 0.15 | µA | ||||
| SWITCH DYNAMICS(1) | |||||||
| tON | Enable turn-on time | VS = ±10 V, RL = 300 Ω, CL= 35 pF |
88 | 136 | ns | ||
| TA = –40°C to +85°C | 144 | ||||||
| TA = –40°C to +125°C | 151 | ||||||
| tOFF | Enable turn-off time | VS = ±10 V, RL = 300 Ω, CL= 35 pF |
63 | 75 | ns | ||
| TA = –40°C to +85°C | 83 | ||||||
| TA = –40°C to +125°C | 90 | ||||||
| tt | Transition time | VS = 10 V, RL = 300 Ω, CL= 35 pF, |
92 | 143 | ns | ||
| TA = –40°C to +85°C | 151 | ||||||
| TA = –40°C to +125°C | 157 | ||||||
| tBBM | Break-before-make time delay | VS = 10 V, RL = 300 Ω, CL= 35 pF, TA = –40°C to +125°C | 30 | 54 | ns | ||
| QJ | Charge injection | CL = 1 nF, RS = 0 Ω | VS = 0 V | 0.3 | pC | ||
| VS = –15 V to +15 V | ±0.6 | ||||||
| Off-isolation | RL = 50 Ω, VS = 1 VRMS, f = 1 MHz |
Nonadjacent channel to D, DA, DB | –96 | dB | |||
| Adjacent channel to D, DA, DB | –85 | ||||||
| Channel-to-channel crosstalk | RL = 50 Ω, VS = 1 VRMS, f = 1 MHz |
Nonadjacent channels | –96 | dB | |||
| Adjacent channels | –88 | ||||||
| CS(OFF) | Input off-capacitance | f = 1 MHz, VS = 0 V | 2.4 | 2.9 | pF | ||
| CD(OFF) | Output off-capacitance | f = 1 MHz, VS = 0 V | MUX508 | 7.5 | 8.4 | pF | |
| MUX509 | 4.3 | 5 | |||||
| CD(ON) | Input/Output on-capacitance | f = 1 MHz, VS = 0 V | MUX508 | 9.4 | 10.6 | pF | |
| MUX509 | 6.7 | 7.7 | |||||
| POWER SUPPLY | |||||||
| VDD supply current | All VA = 0 V or 3.3 V, VS = 0 V, VEN = 3.3 V, |
45 | 59 | µA | |||
| TA = –40°C to +85°C | 62 | ||||||
| TA = –40°C to +125°C | 83 | ||||||
| VSS supply current | All VA = 0 V or 3.3 V, VS = 0 V, VEN = 3.3 V, |
25 | 34 | µA | |||
| TA = –40°C to +85°C | 37 | ||||||
| TA = –40°C to +125°C | 57 | ||||||
(1) Specified by design, not production tested.
(2) When VS is positive, VD is negative, and vice versa.
7.6 Electrical Characteristics: Single Supply
at TA = 25°C, VDD = 12 V, and VSS = 0 V (unless otherwise noted)(2)| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|
| ANALOG SWITCH | |||||||
| Analog signal range | TA = –40°C to +125°C | VSS | VDD | V | |||
| RON | On-resistance | VS = 10 V, ICH = 1 mA | 235 | 340 | Ω | ||
| TA = –40°C to +85°C | 390 | ||||||
| TA = –40°C to +125°C | 430 | ||||||
| ΔRON | On-resistance match | VS = 10 V, ICH = 1 mA | 3.1 | 12 | Ω | ||
| TA = –40°C to +85°C | 19 | ||||||
| TA = –40°C to +125°C | 23 | ||||||
| On-resistance drift | VS = 10 V | 0.47 | %/°C | ||||
| IS(OFF) | Input leakage current | Switch state is off, VS = 1 V and VD = 10 V, or VS = 10 V and VD = 1 V(1) |
–1 | 0.01 | 1 | nA | |
| TA = –40°C to +85°C | –10 | 10 | |||||
| TA = –40°C to +125°C | –25 | 25 | |||||
| ID(OFF) | Output off leakage current | Switch state is off, VS = 1 V and VD = 10 V, or VS = 10 V and VD = 1 V(1) |
–1 | 0.01 | 1 | nA | |
| TA = –40°C to +85°C | –10 | 10 | |||||
| TA = –40°C to +125°C | –50 | 50 | |||||
| ID(ON) | Output on leakage current | Switch state is on, VD = 1 V and 10 V, VS = floating |
–1 | 0.01 | 1 | nA | |
| TA = –40°C to +85°C | –10 | 10 | |||||
| TA = –40°C to +125°C | –50 | 50 | |||||
| LOGIC INPUT | |||||||
| VIH | High-level input voltage | 2.0 | V | ||||
| VIL | Low-level input voltage | 0.8 | V | ||||
| ID | Input current | 0.15 | µA | ||||
| SWITCH DYNAMIC CHARACTERISTICS | |||||||
| tON | Enable turn-on time | VS = 8 V, RL = 300 Ω, CL= 35 pF |
85 | 140 | ns | ||
| TA = –40°C to +85°C | 145 | ||||||
| TA = –40°C to +125°C | 149 | ||||||
| tOFF | Enable turn-off time | VS = 8 V, RL = 300 Ω, CL= 35 pF |
48 | 83 | ns | ||
| TA = –40°C to +85°C | 94 | ||||||
| TA = –40°C to +125°C | 102 | ||||||
| tt | Transition time | VS = 8 V, CL= 35 pF | 87 | 147 | ns | ||
| VS = 8 V, RL = 300 Ω, CL= 35 pF, |
TA = –40°C to +85°C | 153 | |||||
| VS = 8 V, RL = 300 Ω, CL= 35 pF, |
TA = –40°C to +125°C | 155 | |||||
| tBBM | Break-before-make time delay | VS = 8 V, RL = 300 Ω, CL= 35 pF, TA = –40°C to +125°C | 30 | 54 | ns | ||
| QJ | Charge injection | CL = 1 nF, RS = 0 Ω | VS = 6 V | 0.15 | pC | ||
| VS = 0 V to 12 V, | ±0.4 | ||||||
| Off-isolation | RL = 50 Ω, VS = 1 VRMS, f = 1 MHz |
Nonadjacent channel to D, DA, DB | -96 | dB | |||
| Adjacent channel to D, DA, DB | -85 | ||||||
| Channel-to-channel crosstalk | RL = 50 Ω, VS = 1 VRMS, f = 1 MHz |
Nonadjacent channels | –96 | dB | |||
| Adjacent channels | -88 | ||||||
| CS(OFF) | Input off-capacitance | f = 1 MHz, VS = 6 V | 2.7 | 3.2 | pF | ||
| CD(OFF) | Output off-capacitance | f = 1 MHz, VS = 6 V | MUX508 | 9.1 | 10 | pF | |
| MUX509 | 5 | 5.7 | |||||
| CD(ON) | Input/Output on-capacitance | f = 1 MHz, VS = 6 V | MUX508 | 10.8 | 12 | pF | |
| MUX509 | 6.9 | 8 | |||||
| POWER SUPPLY | |||||||
| VDD supply current | All VA = 0 V or 3.3 V, VS= 0 V, VEN = 3.3 V |
42 | 53 | µA | |||
| TA = –40°C to +85°C | 56 | ||||||
| TA = –40°C to +125°C | 77 | ||||||
| VSS supply current | All VA = 0 V or 3.3 V, VS = 0 V, VEN = 3.3 V |
23 | 38 | µA | |||
| TA = –40°C to +85°C | 31 | ||||||
| TA = –40°C to +125°C | 51 | ||||||
(1) When VS is 1 V, VD is 10 V, and vice versa.
(2) Specified by design, not production tested.
7.7 Typical Characteristics
at TA = 25°C, VDD = 15 V, and VSS = –15 V (unless otherwise noted)
| VDD = 24 V, VSS = 0 V | ||
| VDD = 15 V, VSS = –15 V | ||
| MUX508, source-to-drain | ||
| Drain-to-source |
| MUX508, VDD = 15 V, VSS = –15 V | ||
| MUX508, VDD = 30 V, VSS = 0 V | ||
| MUX508, VDD = 12 V, VSS = 0 V | ||
| VDD = 15 V, VSS = –15 V | ||
| VDD = 12 V, VSS = 0 V | ||
| VDD = 12 V, VSS = –12 V | ||
| VDD = 12 V, VSS = 0 V | ||
| MUX509, source-to-drain | ||
| MUX509, VDD = 15 V, VSS = –15 V | ||
| MUX509, VDD = 30 V, VSS = 0 V | ||
| MUX509, VDD = 12 V, VSS = 0 V | ||