SNOS752E May 1999 – September 2014 LM6152 , LM6154
PRODUCTION DATA.
- 1Features
- 2Applications
- 3Description
- 4Revision History
- 5Pin Configuration and Functions
-
6Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 Handling Ratings
- 6.3 Recommended Operating Conditions
- 6.4 Thermal Information
- 6.5 5.0 V DC Electrical Characteristics
- 6.6 5.0 V AC Electrical Characteristics
- 6.7 2.7 V DC Electrical Characteristics
- 6.8 2.7 V AC Electrical Characteristics
- 6.9 24 V DC Electrical Characteristics
- 6.10 24 V AC Electrical Characteristics
- 6.11 Typical Performance Characteristics
- 7Application and Implementation
- 8Device and Documentation Support
- 9Mechanical, Packaging, and Orderable Information
封裝選項
機械數據 (封裝 | 引腳)
- D|8
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
6 Specifications
6.1 Absolute Maximum Ratings(1)(1)
| MIN | MAX | UNIT | |
|---|---|---|---|
| Differential Input Voltage | ±15 | V | |
| Voltage at Input/Output Pin | (V+) + 0.3 (V−) −0.3 |
V | |
| Supply Voltage (V+ − V−) | 35 | V | |
| Current at Input Pin | ±10 | mA | |
| Current at Output Pin (2) | ±25 | mA | |
| Current at Power Supply Pin | 50 | mA | |
| Lead Temperature (soldering, 10 sec) | 260 | °C | |
| Junction Temperature (3) | 150 | °C |
(1) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and specifications.
6.2 Handling Ratings
| MIN | MAX | UNIT | |||
|---|---|---|---|---|---|
| Tstg | Storage temperature range | -65 | +150 | °C | |
| V(ESD) | Electrostatic discharge | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1) | 2500 | V | |
(1) JEDEC document JEP155 states that 2500-V HBM allows safe manufacturing with a standard ESD control process. Human body model is 1.5 kΩ in series with 100 pF
6.3 Recommended Operating Conditions(1)
over operating free-air temperature range (unless otherwise noted)| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Supply Voltage | 2.7 ≤ V+ ≤ 24 | V | ||
| Operating Temperature Range, LM6152,LM6154 | 0 | +70 | °C | |
6.4 Thermal Information
| THERMAL METRIC(1) | D08A | D14A | UNIT | |
|---|---|---|---|---|
| 8 PINS | 14 PINS | |||
| RθJA | Junction-to-ambient thermal resistance | 193°C/W | 126°C/W | °C/W |
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
6.5 5.0 V DC Electrical Characteristics
Unless otherwise specified, all limits are ensured for V+ = 5.0V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ to V+/2. Boldface limits apply at the temperature extremes.| PARAMETER | TEST CONDITIONS | TYP(4) | LM6152AC LIMIT(5) |
LM6154BC LM6152BC LIMIT(5) |
UNIT | |
|---|---|---|---|---|---|---|
| VOS | Input Offset Voltage | 0.54 | 2 4 |
5 7 |
mV max |
|
| TCVOS | Input Offset Voltage Average Drift | 10 | µV/°C | |||
| IB | Input Bias Current | 0V ≤ VCM ≤ 5V | 500 750 |
980 1500 |
980 1500 |
nA max |
| IOS | Input Offset Current | 32 40 |
100 160 |
100 160 |
nA max | |
| RIN | Input Resistance, CM | 0V ≤ VCM ≤ 4V | 30 | MΩ | ||
| CMRR | Common Mode Rejection Ratio | 0V ≤ VCM ≤ 4V | 94 | 70 | 70 | dB min |
| 0V ≤ VCM ≤ 5V | 84 | 60 | 60 | |||
| PSRR | Power Supply Rejection Ratio | 5V ≤ V+ ≤ 24V | 91 | 80 | 80 | dB min |
| VCM | Input Common-Mode Voltage Range | Low | −0.25 | 0 | 0 | V |
| High | 5.25 | 5.0 | 5.0 | V | ||
| AV | Large Signal Voltage Gain | RL = 10 kΩ | 214 | 50 | 50 | V/mV min |
| VO | Output Swing | RL = 100 kΩ | 0.006 | 0.02 0.03 |
0.02 0.03 |
V max |
| 4.992 | 4.97 4.96 |
4.97 4.96 |
V min |
|||
| RL = 2 kΩ | 0.04 | 0.10 0.12 |
0.10 0.12 |
V max |
||
| 4.89 | 4.80 4.70 |
4.80 4.70 |
V min |
|||
| ISC | Output Short Circuit Current | Sourcing | 6.2 | 3 2.5 |
3 2.5 |
mA min |
| 27 17 |
27 17 |
mA max |
||||
| Sinking | 16.9 | 7 5 |
7 5 |
mA min |
||
| 40 | 40 | mA max |
||||
| IS | Supply Current | Per Amplifier | 1.4 | 2 2.25 |
2 2.25 |
mA max |
6.6 5.0 V AC Electrical Characteristics
Unless otherwise specified, all limits ensured for V+ = 5.0V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ to V+/2. Boldface limits apply at the temperature extremes.| PARAMETER | TEST CONDITIONS | TYP(4) | LM6152AC LIMIT(5) |
LM6154BC LM6152BC LIMIT(5) |
UNIT | |
|---|---|---|---|---|---|---|
| SR | Slew Rate | ±4V Step @ VS = ±6V, RS < 1 kΩ |
30 | 24 15 |
24 15 |
V/µs min |
| GBW | Gain-Bandwidth Product | f = 100 kHz | 75 | MHz | ||
| Amp-to-Amp Isolation | RL = 10 kΩ | 125 | dB | |||
| en | Input-Referred Voltage Noise | f = 1 kHz | 9 | nV/√Hz | ||
| in | Input-Referred Current Noise | f = 1 kHz | 0.34 | pA/√Hz | ||
| T.H.D | Total Harmonic Distortion | f = 100 kHz, RL = 10 kΩ AV = −1, VO = 2.5 VPP |
−65 | dBc | ||
| ts | Settling Time | 2V Step to 0.01% | 1.1 | µs | ||
6.7 2.7 V DC Electrical Characteristics
Unless otherwise specified, all limits are ensured for V+ = 2.7V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ to V+/2. Boldface limits apply at the temperature extremes.| PARAMETER | TEST CONDITIONS | TYP(4) | LM6152AC LIMIT(5) |
LM6154BC LM6152BC LIMIT(5) |
UNIT | |
|---|---|---|---|---|---|---|
| VOS | Input Offset Voltage | 0.8 | 2 5 |
5 8 |
mV max |
|
| TCVOS | Input Offset Voltage Average Drift | 10 | µV/°C | |||
| IB | Input Bias Current | 500 | nA | |||
| IOS | Input Offset Current | 50 | nA | |||
| RIN | Input Resistance, CM | 0V ≤ VCM ≤ 1.8V | 30 | MΩ | ||
| CMRR | Common Mode Rejection Ratio | 0V ≤ VCM ≤ 1.8V | 88 | dB | ||
| 0V ≤ VCM ≤ 2.7V | 78 | |||||
| PSRR | Power Supply Rejection Ratio | 3V ≤ V+ ≤ 5V | 69 | dB | ||
| VCM | Input Common-Mode Voltage Range | Low | −0.25 | 0 | 0 | V |
| High | 2.95 | 2.7 | 2.7 | V | ||
| AV | Large Signal Voltage Gain | RL = 10 kΩ | 5.5 | V/mV | ||
| VO | Output Swing | RL = 10 kΩ | 0.032 | 0.07 0.11 |
0.07 0.11 |
V max |
| 2.68 | 2.64 2.62 |
2.64 2.62 |
V min |
|||
| IS | Supply Current | Per Amplifier | 1.35 | mA | ||
6.8 2.7 V AC Electrical Characteristics
Unless otherwise specified, all limits are ensured for V+ = 2.7V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ to V+/2. Boldface limits apply at the temperature extremes.| PARAMETER | TEST CONDITIONS | TYP(4) | LM6152AC LIMIT(5) |
LM6154BC LM6152BC LIMIT(5) |
UNIT | |
|---|---|---|---|---|---|---|
| GBW | Gain-Bandwidth Product | f = 100 kHz | 80 | MHz | ||
6.9 24 V DC Electrical Characteristics
Unless otherwise specified, all limits are ensured for V+ = 24V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ to V+/2. Boldface limits apply at the temperature extremes.| PARAMETER | TEST CONDITIONS | TYP(4) | LM6152AC LIMIT(5) |
LM6154BC LM6152BC LIMIT(5) |
UNIT | |
|---|---|---|---|---|---|---|
| VOS | Input Offset Voltage | 0.3 | 2 4 |
7 9 |
mV max |
|
| TCVOS | Input Offset Voltage Average Drift | 10 | µV/°C | |||
| IB | Input Bias Current | 500 | nA | |||
| IOS | Input Offset Current | 32 | nA | |||
| RIN | Input Resistance, CM | 0V ≤ VCM ≤ 23V | 60 | Meg Ω | ||
| CMRR | Common Mode Rejection Ratio | 0V ≤ VCM ≤ 23V | 94 | dB | ||
| 0V ≤ VCM ≤ 24V | 84 | |||||
| PSRR | Power Supply Rejection Ratio | 0V ≤ VCM ≤ 24V | 95 | dB | ||
| VCM | Input Common-Mode Voltage Range | Low | −0.25 | 0 | 0 | V |
| High | 24.25 | 24 | 24 | V | ||
| AV | Large Signal Voltage Gain | RL = 10 kΩ | 55 | V/mV | ||
| VO | Output Swing | RL = 10 kΩ | 0.044 | 0.075 0.090 |
0.075 0.090 |
V max |
| 23.91 | 23.8 23.7 |
23.8 23.7 |
V min |
|||
| IS | Supply Current | Per Amplifier | 1.6 | 2.25 2.50 |
2.25 2.50 |
mA max |
6.10 24 V AC Electrical Characteristics
Unless otherwise specified, all limits are ensured for V+ = 24V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ to V+/2. Boldface limits apply at the temperature extremes.| PARAMETER | TEST CONDITIONS | TYP(4) | LM6152AC LIMIT(5) |
LM6154BC LM6152BC LIMIT(5) |
UNIT | |
|---|---|---|---|---|---|---|
| GBW | Gain-Bandwidth Product | f = 100 kHz | 80 | MHz | ||
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test conditions, see the Electrical Characteristics.
(2) Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150°C.
(3) The maximum power dissipation is a function of TJ(MAX) , RθJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(MAX)–T A)/RθJA. All numbers apply for packages soldered directly into a PC board.
(4) Typical Values represent the most likely parametric norm.
(5) All limits are specified by testing or statistical analysis.
6.11 Typical Performance Characteristics
for Various Loads
(CL = 100 pF)
(VS = 5V)
(VS = 24V)
(VS = 10V)
