亚洲AV无码乱码国产精品果冻传媒,z欧美一区二区不卡视频,国产精品久久人妻无码A片

ZHCSJ25E November 2018 – July 2024 ISO7760-Q1 , ISO7761-Q1 , ISO7762-Q1 , ISO7763-Q1

PRODUCTION DATA

封裝選項

機械數(shù)據(jù) (封裝 | 引腳)

DW|16
- MSOI003I
DBQ|16
- MSOI004H

散熱焊盤機械數(shù)據(jù) (封裝 | 引腳)

DW|16
- QFND505A

訂購信息

6.8 Safety Limiting Values

Safety limiting⁽¹⁾ intends to minimize potential damage to the isolation barrier upon failure of input or output circuitry.

PARAMETER		TEST CONDITIONS	MAX	UNIT
DW-16 PACKAGE
I_S	Safety input, output, or supply current ⁽¹⁾	R_θJA = 60.3°C/W, V_I = 5.5 V, T_J = 150°C, T_A = 25°C, see Figure 6-1	377	mA
		R_θJA = 60.3°C/W, V_I = 3.6 V, T_J = 150°C, T_A = 25°C, see Figure 6-1	576
		R_θJA = 60.3°C/W, V_I = 2.75 V, T_J = 150°C, T_A = 25°C, see Figure 6-1	754
P_S	Safety input, output, or total power ⁽¹⁾	R_θJA = 60.3°C/W, T_J = 150°C, T_A = 25°C, see Figure 6-1	2073	mW
T_S	Maximum safety temperature ⁽¹⁾		150	°C
DBQ-16 PACKAGE
I_S	Safety input, output, or supply current ⁽¹⁾	R_θJA = 86.5°C/W, V_I = 5.5 V, T_J = 150°C, T_A = 25°C, see Figure 6-2	263	mA
		R_θJA = 86.5°C/W, V_I = 3.6 V, T_J = 150°C, T_A = 25°C, see Figure 6-2	401
		R_θJA = 86.5°C/W, V_I = 2.75 V, T_J = 150°C, T_A = 25°C, see Figure 6-2	525
P_S	Safety input, output, or total power ⁽¹⁾	R_θJA = 86.5°C/W, T_J = 150°C, T_A = 25°C, see Figure 6-2	1445	mW
T_S	Maximum safety temperature ⁽¹⁾		150	°C

(1) The maximum safety temperature, T_S, has the same value as the maximum junction temperature, T_J, specified for the device. The I_S and P_S parameters represent the safety current and safety power respectively. The maximum limits of I_S and P_S should not be exceeded. These limits vary with the ambient temperature, T_A.

The junction-to-air thermal resistance, R_θJA, in the table is that of a device installed on a high-K test board for leaded surface-mount packages. Use these equations to calculate the value for each parameter:

T_J = T_A + R_θJA × P, where P is the power dissipated in the device.
T_J(max)= T_S = T_A + R_θJA × P_S, where T_J(max) is the maximum allowed junction temperature.
P_S = I_S × V_I, where V_I is the maximum input voltage.

_{<center id="0o0pr"><label id="0o0pr"></label></center>}