ZHCSCW1G September 2014 – January 2017 ISO7340C , ISO7340FC , ISO7341C , ISO7341FC , ISO7342C , ISO7342FC
PRODUCTION DATA.
- 1 特性
- 2 應用
- 3 說明
- 4 修訂歷史記錄
- 5 說明 （續）
- 6 Pin Configuration and Functions
-
7 Specifications
- 7.1 Absolute Maximum Ratings
- 7.2 ESD Ratings
- 7.3 Recommended Operating Conditions
- 7.4 Thermal Information
- 7.5 Power Ratings
- 7.6 Insulation Specifications
- 7.7 Safety-Related Certifications
- 7.8 Safety Limiting Values
- 7.9 Electrical Characteristics—5-V Supply
- 7.10 Supply Current Characteristics—5-V Supply
- 7.11 Electrical Characteristics—3.3-V Supply
- 7.12 Supply Current Characteristics—3.3-V Supply
- 7.13 Switching Characteristics—5-V Supply
- 7.14 Switching Characteristics—3.3-V Supply
- 7.15 Insulation Characteristics Curves
- 7.16 Typical Characteristics
- 8 Parameter Measurement Information
- 9 Detailed Description
- 10Application and Implementation
- 11Power Supply Recommendations
- 12Layout
- 13器件和文檔支持
- 14機械、封裝和可訂購信息
封裝選項
請參考 PDF 數據表獲取器件具體的封裝圖。
機械數據 (封裝 | 引腳)
- DW|16
散熱焊盤機械數據 (封裝 | 引腳)
訂購信息
1 特性
- 信號傳輸速率：25Mbps刪除了數據表標題中的刪除了數據表標題中的
- 輸入時使用集成噪聲濾波器
- 默認輸出高電平和低電平選項
- 低功耗，每通道 ICC 典型值（1Mbps 時）：
-
ISO7340x：0.9mA（5V 電源）、
0.7mA（3.3V 電源） -
ISO7341x：1.2mA（5V 電源）、
0.9mA（3.3V 電源） -
ISO7342x：1.3mA（5V 電源）、
0.9mA（3.3V 電源）
-
ISO7340x：0.9mA（5V 電源）、
- 低傳播延遲：典型值 31ns
（5V 電源） - 3.3V 和 5V 電平轉換
- 寬溫度范圍：-40°C 至 125°C
- 70KV/μs 瞬態抗擾度，典型值（5V 電源）
- 優異的電磁兼容性 (EMC)
- 系統級靜電放電 (ESD)、瞬態放電 (EFT) 以及抗浪涌保護
- 低輻射
- 由 3.3V 和 5V 電源供電
- 寬體小外形尺寸集成電路 (SOIC)-16 封裝
- 安全相關認證：
2 應用
- 是下列應用中光耦合器的替代產品：
- 工業現場總線 (Fieldbus)
- Profibus 現場總線
- Modbus
- DeviceNet 數據總線
- 伺服器控制接口
- 電機控制
- 電源
- 電池組
- 工業現場總線 (Fieldbus)
3 說明
ISO734x 系列器件可提供符合 UL 1577 標準的長達 1 分鐘且高達 3000 VRMS 的電隔離，以及符合 VDE V 0884-10 標準的 4242 VPK 隔離。這些器件具有四個隔離通道，后者由邏輯輸入和輸出緩沖器組成，并由二氧化硅 (SiO2) 絕緣隔柵進行隔離。
ISO7340x 器件具有四個正向通道，ISO7341x 器件具有三個正向通道和一個反向通道，ISO7342x 器件具有兩個正向通道和兩個反向通道。如果出現輸入功率或信號損失，默認輸出低（器件帶有后綴 F）或高（器件不帶后綴 F）。有關更多詳細信息，請參閱 器件功能模式部分。
器件信息(1)
| 器件型號 | 封裝 | 封裝尺寸 |
|---|---|---|
| ISO7340C | SOIC (16) | 10.30mm x 7.50mm |
| ISO7340FC | ||
| ISO7341C | ||
| ISO7341FC | ||
| ISO7342C | ||
| ISO7342FC |
- 如需了解所有可用封裝，請參閱數據表末尾的可訂購產品附錄。
4 修訂歷史記錄
Changes from F Revision (August 2016) to G Revision
- Deleted “增強型”Go
- the production tested note for the UL VRMS value from the Safety-Related CertificationsGo
Changes from E Revision (April 2015) to F Revision
- Changed the minimum air gap (clearance) parameter (L(I01)) to the external clearance parameterGo
- Changed the minimum external tracking (creepage) parameter (L(I02)) to the external creepage parameterGo
- Changed the typ value for the enable propagation delay, high impedance-to-high output parameter of the FC devices and the typ value for the enable propagation delay, high impedance-to-low output parameter of the C devices from 16 to 16000 in the Switching Characteristics—3.3-V Supply table Go
- Added 接收文檔更新通知 部分Go
Changes from D Revision (March 2015) to E Revision
- 刪除了 中的“(VDE V0884-10):2006-12”和“(VDE 0411-1:2011-07)”特性 安全及管理批準：Go
- 將“（等待審批）”從 的 CSA 組件驗收列表項中刪除特性Go
- Deleted IEC from the section title: Insulation and Safety-Related Specifications for DW-16 Package Go
- Changed the TEST Conditions of CTI in Insulation and Safety-Related Specifications for DW-16 PackageGo
- Changed the Test Conditions of VISO in Insulation Characteristics Go
- Changed column CSA in the Safety-Related Certifications table Go
- Changed From: VCC1 To: VCCI in Switching Characteristics Test Circuit and Voltage Waveforms Go
- Changed From: VCC1 To: VCCI and From: VCC2 To: VCCO in Common-Mode Transient Immunity Test CircuitGo
Changes from C Revision (December 2014) to D Revision
- 更改了 中的 DIN V VDE 0884-10 編號特性 安全及監管認證：Go
- 向 中的 CSA 組件驗收列表項添加了“（等待審批）”特性Go
- 刪除了 中的“所有已計劃機構認證”特性 安全及監管認證：Go
- 已更改簡化電路原理圖：VCC1 更改為 VCCI、VCC2 更改為 VCCO、GND1 更改為 GNDI、GND2 更改為 GNDO。已添加注釋 1 和注釋 2Go
- Added Note: "Maximum voltage must not exceed 6 V:" to Absolute Maximum RatingsGo
- Added "DT1" to the Minimum internal gap in Insulation and Safety-Related Specifications for DW-16 PackageGo
- Changed VIORM "Maximum repetitive peak voltage" To: "Maximum repetitive peak isolation voltage per DIN V VDE V 0884-10" in Insulation Characteristics Go
- Changed VIOTM From: "DIN V VDE 0884-10 " To: "DIN V VDE V 0884-10" in Insulation Characteristics Go
- Changed VIOSM "Maximum surge voltage per DIN V VDE 0884-10 " To: "Maximum surge isolation voltage per DIN V VDE V 0884-100" in Insulation Characteristics Go
- Changed VIOSM Test Conditions in Insulation Characteristics Go
- Changed VPR From: "DIN V VDE 0884-10 " To: "DIN V VDE V 0884-10" in Insulation Characteristics Go
- Changed RS Test Conditions in Insulation and Safety-Related Specifications for DW-16 Package From: TS To: TS = 150°C Go
- Changed the Safety-Related Certifications table Go
- Changed title From: " IEC Safety Limiting Values" To: Safety Limiting ValuesGo
- Changed MIN value for VOH in the Electrical Characteristics From: VCCx - 0.5 To: VCCO - 0.5 Go
- Changed VCCx To VCCO in Note 1 of the Electrical CharacteristicsGo
- Changed MIN value for VOH in the Electrical Characteristics From: VCCx - 0.5 To: VCCO - 0.5 Go
- Changed VCCx To VCCO in Note 1 of the Electrical CharacteristicsGo
- Changed Function Table Header information From: INPUT-SIDE VCC To: VCCI and OUTPUT-SIDE VCC To: VCCOGo
- Changed Device I/O Schematics From: VCC To: VCCI on the inputs and VCCO on Output and EnabledGo
- Moved Typical ISO7340x Circuit Hook-up to Typical ISO7342x-Q1 Circuit Hook-up from the Design Requirements section to the Detailed Design Procedure sectionGo
Changes from B Revision (November 2014) to C Revision
- Changed the Handling Ratings table to ESD RatingsGo
- Changed Minimum internal gap MIN value in Insulation and Safety-Related Specifications for DW-16 Package From: 0.014 mm To: 13.5 µmGo
- Changed Minimum internal gap MIN value in Insulation and Safety-Related Specifications for DW-16 Package From: 13.5 µm To: 13 µmGo
- Delete text "per DIN V VDE 0884-10" from VIORM in the table in section Insulation Characteristics Go
- Changed From: VPEAK To VPK in the UNIT column of the table in section Insulation CharacteristicsGo
- Added VIOSM to the table in section Insulation Characteristics Go
- Changed the table in Safety-Related Certifications section - removed text "Certified according to", "Approved under", "Recognized under", changed "pending" To: "planned"Go
- Changed Maximum Repetitive Peak Voltage, 1414 VPK To: Maximum surge voltage , 6000 VPK in the VDE column of the table in section Safety-Related CertificationsGo
- Changed the ICC2, Supply current, DC to 1 Mbps TYP value From: 3 To 3.2 mA Go
- Changed the ICC2, Supply current, 10 Mbps TYP value From: 5.1 To 5.6 mA Go
- Changed the ICC2, Supply current, 25 Mbps TYP value From: 8.6 To 9.3 mA Go
- Changed the ICC1, Supply current, 10 Mbps TYP value From: 0.8 To 0.9 mA Go
- Changed the ICC2, Supply current, 10 Mbps TYP value From: 0.3.6 To 3.9 mA Go
- Changed the ICC2, Supply current, 25 Mbps TYP value From: 5.9 To 6.3 mA Go
- Added ISO7340 Supply Current vs Data Rate (15-pF Load) and ISO7340x Supply Current vs Data Rate (No Load)Go
- Changed ISO7341x Supply Current vs Data Rate (No Load)Go
Changes from A Revision (Octoberr 2014) to B Revision
- Added Test Condition to IEC 60664-1 Ratings Table: Rated mains voltage ≤ 1000 VRMS Go
- Changed the RIO Test Conditions in Insulation and Safety-Related Specifications for DW-16 Package : Added TA = 25°C at MIN = 1012Go
- Changed the RIO Test Conditions in Insulation and Safety-Related Specifications for DW-16 Package : Added VIO = 500 V, 100°C ≤ TA ≤ 125°C at MIN = 1011Go
- Added ISO7341x Supply Current vs Data Rate (15-pF Load) and ISO7341x Supply Current vs Data Rate (No Load)Go
Changes from * Revision (September 2014) to A Revision